Cycle Lathe

Meuser KM 2

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Hfjdpfewbilxex Agfjf Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: ready for operation (used), Two lead and feed screw lathes by Weiler are available. 1) Weiler Condor VS-2, distance between centers: 800mm, center height: 155mm, swing diameter over bed/cross slide: 330mm/160mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1900mm/900mm/1500mm. 2) Weiler Praktikant M, distance between centers: 650mm, center height: 160mm, swing diameter over bed/cross slide: 320mm/175mm, machine dimensions X/Y/Z: approx. 1700mm/1000mm/1700mm, weight: approx. 700kg. Both machines show isolated individual functional limitations, but are operational. Documentation available. On-site inspection is possible. Hsdpfx Aeydp Ahogfsff

Condition: new, Year of construction: 2026, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Hfjdpfxsfy Ttis Agfof Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 For more information please visit our web page or contact us

Year of construction: 1980, condition: ready for operation (used), Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible. Hfjdpfx Agjyab I Isfof

Condition: ready for operation (used), Year of construction: 2002, Band saw, Industrial Band saw, Behringer HBP 220, Used Machine Hjdpfx Astlq Axogfsff Manufacturer: Behringer Model: HBP 220 Year: 2002 Weight: 1120 kg Dimensions: 2350 x 1250 x 1850 mm Cutting Range: 220x230 mm Hydraulic clamp Electrical Data: 1.5 kW; 50 Hz; 6 A Ready for operation

Condition: used, Three-phase motor, electric motor -Power: 4 kW -Speed: 710 rpm -Shaft: Ø 41 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 580/390/H300 mm -Weight: 92 kg Hodpfxsctyqmo Agfoff

Condition: used, Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Handover: in its current condition as inspected -Connector plug: Damage, see photos -Manufacturer: Siemens Wittenstein, servo geared motor Hfjdjyh Ufgjpfx Agfsf -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Dimensions: 450/190/H255 mm -Weight: 33 kg

Condition: good (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor Hsdpfx Aoyh Huyjgfjff -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 100S-MC1-3 -1K1-2K i= 3 -Shaft: Ø 32 x 55 mm -Protection class: IP64 -Number: 3 servo motors available -Price: per piece -Dimensions: 450/190/H255 mm -Weight: 33 kg/pc.