Belt sanding machine

METALLKRAFT MBSM 150-20 AS

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm Codefg E H Topfx Ab Toaa table height mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg dimensions of the machine ca. m How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Caedpfxoxgukue Ab Tja Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can operate horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, The bSander 75.200 & 150.200 are machine sanders for sanding pipe faces and profile ends, for edge sanding and for face sanding on the upper surface of the system. bSander 150.200: Belt dimensions 150 x 2000 mm Belt speed 29 m/s. Drive power 4.0 kW//3x400 V//50Hz Dimensions L x W x H 700 x 530 x 1130 mm Weight 90 kg bSander 75.200: Belt dimensions 2000 x 75 mm Belt speed 29 m/s Drive power 3.0 kW//3x400 V//50 Hz Dimensions L x W x H 700 x 490 x 1130 Cedpfx Aod Dp Aaeb Tsaa Weight 72 kg Price on request

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Caedpfx Aboxl Sq Aj Tsa Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: as good as new (ex-display), A demonstration belt grinder WIEGAND with two belt speeds ideal for steel and stainless steel Codpfx Abspgmufj Tsaa belt dimensions: 2000 x 150 mm belt speed: 18/ 37 m/sec power: 2,2/ 3,8 kW 400V/50Hz weight: 110 kg Tech. Data and dimensions: Errors excepted

Condition: good (used), Year of construction: 2009, Manufacturer: BAILEIGH Type: R-H 120 Control: Telemechanique Year of manufacture: 2009 Arm adjustable 330 mm Hydraulic side support Set of universal rolls Set of pipe rolls 88.9 mm Set of pipe rolls 60.3 mm Digital readout system position side rolls Horizontal & vertical operation possible Specifications Metric US Standard Horizontal and Vertical Horizontal & Vertical Axis Ø 100 mm Cjdpjwpkwfsfx Ab Toaa Number of rolls 3 Horizontal Yes Vertical Yes Flat capacity 100 x 240 x 1600 mm Pipe capacity 139 x 4 x 3000 Ø x mm T-profile capacity 100 x 100 x 1000 mm Working speed 0 - 5500 mm/min. Adjustable side roller range 200 Upper roller pressing force 200 Bar Side support yes, 330 mm stroke Dimensions (approximate) Length 1800 mm Width 1600 mm Height 2000 mm Weight 2300 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details. Share on

Condition: new, Year of construction: 2025, With dust extraction Automatic sanding belt centering Tool-free sanding belt change Sanding belt 2000 x 150 mm Surface grinding range 500 mm Belt speed 15/30 m/s Weight 120 kg Pole-changing motor 2.2/3.75 kW Extraction motor 0.37 kW Machine dimensions 950 x 430 x 1050 mm Scope of delivery: Incl. 60 grit sanding belt Dust bag DELIVERY: FREE DOOR (within Germany) NOT THE RIGHT MACHINE? Csdeckk Rispfx Ab Tsaa WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Grinding diameter 3-40mm Length of drill unlimited Point angle 40-180mm Point thinning device Cedpfxogy Ti Do Ab Tjaa Dressing attachment MARCELS MASCHINEN CH

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Including manual back stop Max. bending capacity over the entire working length ----- 1.2 mm Max. working length ----- 2000 mm Max. opening width ----- 30 mm Width of fingers ----- 38 | 38 | 50 | 50 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 mm Max. angle of attack ----- 0 - 135 Caedpfx Asga T Dpeb Toa Weight ----- 540 KG Width ----- 2400 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: new, Year of construction: 2025, ZGH type machines are a versatile solution for sheet metal processing. They can be used universally for demanding craft operations. To create this versatile solution for all applications up to 1.2 mm sheet steel, PPHU Prod Masz drew on its years of experience in mechanical engineering. The ZGH offers the optimum in precision, durability and stability. Codpfjc I Tn Hex Ab Toaa This model is equipped with a control panel. the maximum working length 3140 mm the max. thickness of the sheet for 1.2 mm (steel) the weight of the hand machine is around 2100 kilograms the lifting of the upper beam in three layers bending beam: 30 mm the max. clear width between the beams 100 mm bending angle: 150 degrees delivery to Germany 750 euros delivery date: up to 2 weeks roller shears optional for an additional charge rear stops with scale optional for an additional charge we look forward to hearing from you!