3,600 l nitrogen tank / cold gasifier

Messer Griesheim ST 36

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Cgedpfjx Ap Hpjx Akcet Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Year of construction: 2000, condition: excellent (used), Span approx. 20,0 m Cgedpeqfc Egofx Akcot Lifting height approx. 8,0 m Make/reconstruction HILGERS/TEICHMANN Modification/New construction 2000/2021 Crane equipped with: - Double-rail trolley with 4-corner rope outlet - Magnet System prepared - Radio remote control - Optionally with magnetic traverse or spreader

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder. Cedeiyyf Ispfx Akcjgt

Condition: good (used), functionality: fully functional, Equipment: type plate available, 100,000 liter tank, used, double-walled, good condition, ready for immediate use, cleaned - certificate from specialist company available Length: 15.74 m Cgsdpfxouzvyuj Akcst Diameter: 2.90 m Height: 3.10 m - Transport height - Access ladder - Platform with railing - Firmly welded saddle feet - Ventilation - Limit value transmitter - Dipstick - leak detector Loading and transportation can be offered. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld Cjdouthz Tepfx Akcogt - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: used, Year of construction: 2008, Crowning CNC controlled Bending length 4250 mm 5-axis backgauge Work area lighting Parking position 900 mm Hydraulic lower tool clamping Hydraulic upper tool clamping CNC lower tool displacement Installation height 615 mm ACB preparation Cgodpeyvr Ewefx Akcot

Condition: new, Year of construction: 2024, functionality: fully functional, Multiple load banks are directly available from stock. Contact us today if you want to rent, lease, or buy a load bank. - Load bank 100 kW, 400Vac 50Hz, CosPhi 1 (Very compact, easy to carry in a service van) - Load bank 300 kW, 400Vac 50Hz, CosPhi 1 - Load bank 500 kW, 400Vac 50Hz, CosPhi 1 - Load bank 600 kW, 400Vac 50Hz, CosPhi 1 - Load bank 700 kW, 400Vac 50Hz, CosPhi 1 Codpsr Eyycjfx Akcsgt - Load bank 1000 kW, 400Vac 50Hz, CosPhi 1 - DC load bank with different voltages and capacities in stock, for example, 500VDC and 1000VDC, 1000 kW. If you are looking for a solution to test at different voltages, such as 440V, 690V, or medium voltages like 10kV, do not hesitate to contact us. We also offer solutions for load banks with a variable power factor (CosPhi) and load banks with a power factor of 0,8 (load bank with a CosPhi 0,8). For example, we have inductive load banks, which we could combine with resistive and load banks, including both. Most of our load banks are equipped with a switch where you can choose between internal and external power for the fans. We offer both stationary and mobile load banks. For mobile purposes, we can add forklift pockets and a robust bracket. We are looking forward to your request.

Condition: ready for operation (used), Year of construction: 2011, Gas semi-trailer cryogenic for LNG (Liquid methane). manufacturer: CRYOCAN EU registration. Year: 2011 Codetulh Iopfx Akcsgt Volume: 50,25 м3 Vacuum certificate We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen We will be glad to answer your questions via Phone and E-mail

Year of construction: 2005, condition: like new (used), Quality used Bystronic Pr 100 8axis cnc pressbrake for sale BYSTRONIC PR100 x 3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake complete With Cybelec Modeva 10S Control. Manufactured 2005 – fully serviced with Bystronic uk from new Cgedohufktspfx Akcot Specification Year of Manufacture /new 2005 Control Cybelec Modeva 10S Back gauge Programmable Guards Fiessler AKAS Capacity 100 Ton Maximum length of bend 3100mm / 3metre Extended Daylight – to be confirmed Max stroke 315mm Rapid approach 180mm/s Bending cycle 10mm/s Rapid return 150mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Hydraulic Crowning We can quote for delivery and installation complete with operator training We can advise and supply brand new tooling to produce your sheet metal products on this cnc press brake

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Flow rate: 40.0 m3/h Csdpfedkdi Tex Akcsgt Pressure: 1,6 MPa