Bandsaw - Horizontal

MBH CY 280 NL

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm Hedozlkv Repfx Apdow cutting width 280 x 190 mm cutting speed 0 - 90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 230 Volt total power requirement 1,5 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double-miter band saw - Variable speed control - Miter cuts up to 60° left and 45° right - Vise with quick-clamping mechanism - Blade tension monitoring - Automatic electric cooling system

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics Hodpfx Aoudi Unopdow The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 417 h, Amada HFE M2 5012 Press Brake (2021) Manufacturer: Amada Type: HFE M2 5012 Press Brake Condition: used, currently in production Year of manufacture: 10/2020 Operating hours: 6830 h Working hours: 417 h (still in use) Pressing force (kN): 500 Hjdpfx Apezwppysdsw Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without die holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600

Condition: new, cutting diameter 225 mm saw band length 2455 mm table height 850 mm cutting width 245 x 150 mm cutting speed 45/90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 90 mm 90 mm 145 mm Impact energy 145 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,2 t dimensions 1,43 x 0,72 x 1,7 m Hsdpfx Asgxi D Topdjw Miter band saw -Miter cuts up to 60° left -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm Hedpfx Aom Twgwspdjw engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Hodjxz Dqmspfx Apdjw Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: Hsdpfx Ajupw R Aepdow - Micro-spray device - Leveling elements

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 3,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, total height: 2,200 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 200 kg, warranty duration: 12 months, Dust extraction system for double mitre saws or saws used in aluminum processing, e.g., Hodpfx Aowii Hxepdsw Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici, etc. If you are looking for a high-performance and quiet dust extraction system, you have come to the right place. Alternatively, there is a pre-control unit including a switch for your double mitre saw, which operates via a potential-free contact. The dust extraction system is ideally suited for aluminum / PVC / steel. Very high-performance and extremely quiet dust extraction system with a noise level below 80 dB! 2600 m³ per hour suction capacity 3 kW motor The dust extraction system includes a 15-meter hose with 2 outlets.

Condition: good (used), Year of construction: 1985, Offer 26046 Technical data: - 2 motor-driven rollers - Manual adjustment of the top roller - Shaft diameter: 30 mm - Shaft rotation: 6 rpm Hedpfjyh I Afsx Apdjw - Roller diameter: 88 – 108 mm - Bending capacity approx.: – flat steel 50 x 8 mm – square profile 20 mm – round pipe 42 mm - Drive: 380 V / 0.55 kW - with: – right / left operation - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

Condition: new, Year of construction: 2026, Optimum Geared Metal Band Saw OPTIsaw SD 200V For demanding sawing work Item number: 3300205 DESCRIPTION Quiet operation Sturdy cast iron construction Saw frame lowering continuously adjustable via hydraulic cylinder with throttle valve Microswitch for automatic limit stop Clearly legible scale for angle adjustment Standard with high-quality bi-metal saw blade Saw blade tension adjustable from the front via handwheel Ball-bearing saw blade guide Robust machine base with large wheels and handy transport handle for easy relocation of the machine Adjustable material stop for series work Safety switch for the saw blade cover Fully equipped, allowing the user to work productively immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx. 1382 mm Width without material stop approx. 434 mm Width/Depth (product) approx. 533 mm Width with Material stop approx. 533 mm Height (product) approx. 1200 mm Height of lower end position approx. 790 mm Height of upper end position approx. 1200 mm Weight (net) approx. 130 kg Work table height 530 mm Electrical data Drive motor power 0.75 kW Connection voltage 230 V Mains frequency 50 Hz Coolant pump motor power 100 W Machine data Saw blade speed(s) 26 – 80 m/min Saw blade length 2360 mm Hedpsv Sg T Nofx Apdew Saw blade width 19 mm Saw blade thickness 0.9 mm Cutting angle 0 – 45° Feed continuously adjustable Saw frame lift manually Cutting ranges Cutting range 0° round (solid material) 180 mm Cutting range 0° square (solid material) 180mm Cutting range 0° rectangular vertical (solid material) 180 x 240 / 50 x 300mm Cutting range +45° round (solid material) 110mm Cutting range +45° square (solid material) 150mm Cutting range +45° rectangular vertical (solid material) 110 x 170mm SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base