CNC turning and milling center

Mazak Super Quick turn 15ms

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor Iisdpfx Agjv S Svve Ijb - coolant tank - immediately available

Condition: excellent (used), Year of construction: 2000, Nominal diameter: 4,500 mm Swing diameter over bed: 820 mm Iiedpfxsyk R Dys Ag Isb Swing diameter over steady rest carriage: 650 mm Spindle bore: 115 mm Main spindle drive power: 40 kW Milling spindle drive power: 25 kW Milling spindle tool holder: HSK 100 Tool changer: 3 x 30 positions Control: SINUMERIK 840 C Including chip conveyor Including documentation Machine is under power and will be available in approximately 2 weeks!

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Iiedpfx Agox Rkvqs Ijb Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: used, Year of construction: 2023, x-travel 3000 mm Ijdpfx Ageyvvlus Ijib y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-620, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED "DOOSAN DNM 4500" vertical machining center with Heidenhain TNC-620 CNC Iiedpfx Asw D Dy Neg Ijb

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders Iisdpeyh Ri Iefx Ag Ijb

Condition: as good as new (ex-display), Year of construction: 2021, Brand new, unused machine!!! DOOSAN LYNX 2100G Year: 2021/10 Max. turning diameter: 170 mm Max. turning length: 330 mm Standard chuck size: 6" Max. spindle torque: 118 N·m Max. spindle speed: 6000 rpm Max. spindle power: 18.5 kW Parts catcher Control system – FANUC touch Iodpey E Ixxsfx Ag Isib Cromar chip conveyor Machine documentation

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min Iisdjx Ru Azopfx Ag Ieb SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode Iiodpfx Agsyk Dc Ne Isb • Configuration: Without crowning • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Isdpoyxn Hcefx Ag Ieib