Lifting tube manipulators

Manut LM MAN

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, load capacity: 210 kg, arm reach: 3,100 mm, Our industrial robots are thoroughly inspected and tested before delivery and are ready for immediate use. Robot comes complete with: Lhjdpfswlz Dbsx Agzec - Control cabinet - Teach panel - Connection cable

Condition: used, Year of construction: 2015, Industrial robot Manufacturer: Kuka Model: KR180 R3100 K prime KRC4 2015 Kuka robot KR180 R3100 K prime (console version) Year of manufacture: 2015 Reach: 3,096 mm Weight: 1,059 kg Payload: 180 kg Kuka controller KRC4 Weight: 150 kg Lsdpownt Rlofx Agzehc Software V8.5.4 Interface: X11 Interface: Beckhoff EtherCat Kuka touch panel KCP4 Kuka connection cables 22126ä

Condition: as good as new (ex-display), Carbide tool grinding machine Lhjdpfjiwi Thsx Agzoc Exhibition machine With new diamond wheels 175 mm For tool holders up to 20 mm

Condition: refurbished (used), Year of construction: 2002, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 350523, Equipment: CE marking, Voltage: 380V Net weight: 1400 kg Customs tariff number: 8458.1120 Dimensions: 180x128x172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter above cross slide: 115 mm Height of center above cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm SPINDLE A2-4 / Camlock D1-3’’ Spindle for Schaublin collets: Hainbuch / F38 / B32 Lodox Upugepfx Agzjhc Spindle speed: 50–5,000 rpm AC motor drive: continuous/intermittent power: 5.5 / 7.5 kW AC motor drive: continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bars: 1,150 daN CROSS SLIDE Cross travel, X-axis: 190 mm Resolution, X-axis (radius): 0.0005 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive: continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm FEED RATES Working feed rates, X and Z axes, stepless: 0–5 m/min Rapid traverse, X and Z axes: 8 m/min TURRET TOOL SYSTEM Standardized toolholder mounting: VDI 20 Number of fixed/tool stations: 8 / - Maximum tool section: 16x16 mm Integrated coolant and bi-directional indexing: yes COOLANT SYSTEM Tank capacity: 55 L Pump flow rate: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Outside diameter of quill: 45 mm Quill stroke: 70 mm Adjustable tailstock pressure: 25–260 daN Subject to errors or omissions, all technical details are provided without commitment. Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts checked and/or replaced Headstock Disassembly, parts cleaning, replacement of worn and defective parts, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Turret Disassembly, cleaning, replacement of worn/defective parts. New paint and face resurfacing. Tailstock Disassembled, inspected, and serviced. New paint. Hydraulic and pneumatic circuits Disassembled, motor inspected, hoses, defective and worn parts replaced. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Z-Axis Disassembly, replacement of worn parts such as O-rings, seals, rings. New ball screw and new sliding block. Electrical cabinet Complete inspection, various relays replaced. Paintwork Colors: White RAL 9003 and grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned Year: 2002

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever Ledeu Ng Hbopfx Agzjhc *

Condition: excellent (used), Year of construction: 2013, operating hours: 6,100 h, functionality: fully functional, machine/vehicle number: 628413, overall weight: 1,360 kg, KUKA industrial robot KR240 R2900 ultra with control cabinet. Condition: very good (used) Lhodpfx Agourb Tmjzsc Year of construction 07.2013 (control cabinet 2013). Operating hours: 6100 h. Reach: 2,896 mm, Load capacity: 240 kg Serial number: 628413 Dimensions: L180 cm, W 90 cm, H 170 cm . Weight: 1145 kg Control cabinet : Kuka KRC4 Serial number: 322953 Dimensions: L80 cm, W 60cm, H 110 cm . Weight of 165 kg (For further details see type plates). Complete with robot manipulator, control cabinet, teach panel, connection cable. Total weight: 1,360 kg We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot.

Condition: good (used), Linear axis Manufacturer: Kuka Type: KL1500-2 Length: 5,5 m Lodpfx Aeutm Rtogzjhc Platform for various robots (Series2000, Comp) Currently with adapter plate for KR30-3 - KR60-3

Condition: good (used), Year of construction: 2018, operating hours: 3,196 h, functionality: fully functional, machine/vehicle number: 667169, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,096 mm, This is a KUKA KR 210 R3100 ultra industrial robot. Built in 2018. We are also happy to offer this refurbished robot! The robot includes the following options: KUKA.CPC KUKA.Platform Ledpjv N U H Sefx Agzshc BoardPackage KUKA.PROFINET MS KUKA.UpdatePackage Firmware KUKA.UpdateService KUKA.UpdateServiceConfiguration

Condition: used, Year of construction: 2013, overall weight: 2,375 kg, load capacity: 360 kg, controller model: KRC4, Equipment: documentation/manual, Scope of delivery/accessories: mechanics, control cabinet, operator panel, connecting cables Lhjdpfxjtr E Sge Agzec

Condition: used, Year of construction: 2014, Industrial Robot Manufacturer: Kuka Model: KR210 R3100 ultra with 4.5m linear axis Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload capacity: 210 kg Lhjdpfexuwlwox Agzjc Kuka control unit KRC4 Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connecting cables Kuka linear axis Type: KL1500-3 T Year of manufacture: 2013 Length: approx. 4.5 m Travel distance: approx. 3.5 m KRC4 cable carrier Weight: 2,200 kg 51125