SHEETFED OFFSET

Man Roland R 704 3B Direct Drive

Condition: good (used), Year of construction: 2014, Direct Drive Straight Machine APL (Fully-Automated Plate Changing ) InlineColorPilot IPC (Graphometronic): Automatic inline color measuring and controlling system PressPilot Center IntegrationPilot plus Non-stop Antistatic Device on Feeder (Eltex) Pedpfx Ahexiw Tqsvepp Antistatic Device on Delivery (Eltex) Ink unit Temperature Control Technotrans (Watercooled) Automatic Blanket Washing Device with Blanket (Elettra) Automatic Ink Roller Washing Device Impression Cylinder Washing Device with Blanket Airglide Delivery ROLAND SelectDryer IR/TL Dryer - High Performance Performance Package Coating System Tresu with Doctor Chamber Blade Powder Max smart: Powder Sprayer QuickChange Air: Job specific air settings for all relevant consumption points via the control console QuickChange Clamp: Multi-purpose speed clamp for the coating form cylinder QuickChange Color Plus: Color adjustment system with computer-assisted optimization of the ink slide presets QuickChange Transferter QuickStart: re-start with fewer waste sheets Premium Speed: 18.000 s/h max. LCS: Low Coverage Stabilisation of Inks Central Air Cabinet: SelectAirStation

Condition: used, Year of construction: 2000, cutting width 92 cm feeding depth 92 cm Ppodpfjx Dc Txsx Ahvop feeding high max. 12 cm serial no. 72739

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm Pedpfevphiyox Ahvopp * Paper sheet width max: 2200 mm * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Condition: used, Year of construction: 2007, Offset 5 color KBA Rapida 74-5 Year: 2007 Number of impressions (mio): 69 Machine control - ColorTronic - ErgoTronic Console - Lithec Feeder - Suction feeder table - Double sheet control Printing units - Number of printing unit(s): 5 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device - Automatic blanket washing device - Cooling system: Baldwin Balcontrol Delivery - Standard delivery Ppjdpfxeyibqfo Ahvsp - Non-Stop delivery - Powder spray: Weko AP232 Accessories - Compressed air compressor: Kaeser Max. output (s/h): 15000 Max. sheet size (mm): 605 x 740

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, working width: 2,700 mm, Kryma SK2800 automatic slotter with vacuum autofeeder, machine have been used very little and is in perfect condition and available anytime. Speed is approx. 2000pcs per hour. Machine can do up to 10m long sheets. Video can be sent upon request. Also available Kryma flat bed roller die cut like new, and Sunthinks SC860 single pass printer with auto feeder. Pjdotth Iaopfx Ahvopp * We can arrange transport within Europe, and give offer with transport included if of an interest.

Condition: used, Year of construction: 2003, functionality: limited functionality, paper width (max.): 500 mm, paper height (max.): 350 mm, Ryobi 525 HXX – 5-Colour Offset Printing Press Year of manufacture: 2003 Number of impressions: approx. 103 million Colours: 5 Max. printing format: 35 x 50 cm For sale is a well-maintained Ryobi 525 HXX 5-colour offset printing press from 2003. The machine is fully operational and currently still in production. It has mainly been used in our facility for envelope printing and has therefore been operated gently, experiencing minimal stress from typical commercial print jobs. Condition & Notes: - Machine is production-ready - Service recommended for: Ppodoymlmzepfx Ahvsp - 16 ink zone screws - Technotrans unit (partially leaky) This press is ideal for printing companies seeking a reliable 5-colour quarter-format machine, suitable for commercial printwork, envelope printing, or special productions. Inspection under power possible by appointment. If you are interested, we look forward to your enquiry.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover Ppodpfx Aet E Nthehvop even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Year of construction: 1998, condition: ready for operation (used), Steel saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual system (expandable to 2) 4 double feeders Stitching station with lateral measuring control Ppjdpfx Aeq Rw Exjhvep 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 eyelet stitching heads Lateral measuring control Three-knife trimmer with center cutting device transfer marking table shingle delivery 2 pumps documentation

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Pedpfx Aowt Sq Ujhvjpp Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: used, Year of construction: 1997, functionality: unexamined, Polar Mohr RA-4 Year of manufacture: 1997 Ppjdpfswth Rwex Ahvsp After the jogging process is completed, the air is pressed out of the cutting ream. You can perform single or double pressing, with the pressing pressure for the first cycle being adjustable; on an inclined table, intermediate pressing is also possible. Table size: 900x1150 mm Minimum ream height: 30 mm Manual ream height: 80 mm Compressed air requirement at 6–8 bar: approx. 2 L/min