Used Support Carriage Lower Part for sale (30,519)

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier, slide guide -Tool slide: Support slide lower part support carrier -Dovetail: 90 to 73 mm 12 mm high -Dimensions: see photos -Quantity: 5x bottoms available Bedpswcw S Nsfx Amreln -Price: per piece -Dimensions: 210/180/H25 mm -Weight: 4 kg/piece

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 10999, DESCRIPTION Double-sided grinding machine / grinding machine top/bottom Manufacturer Löwer Type DSM 3000 with workpiece return Bthgq0Ygu0 Working width: 290 mm Grinding thickness: 2-200 mm Shortest workpiece length: approx. 320 mm Equipped with: 1x grinding unit from above, 7.5 kW 1x brushing unit from above, 0.37 kW 1x grinding unit from below, 7.5 kW 1x brushing unit from below, 0.37 kW Grinding belt dimensions: 300 x 1800 mm Electric height adjustment, 0.37 kW Adjustable feed, 6/11/16 m/min. Compressed air: 6-8 bar Dimensions approx. 2700 x 1100 x 1900 mm Weight approx. 1600 kg Bljdpfxjv Dfp Hs Amron

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 166 mm -Groove width: 32 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 185/85/H47 mm / 184/82/H46 mm Bedpfx Amsuqf Nvoroln -Weight: 4.1 kg / 3.9 kg

Condition: good (used), Bezel, steady rest, lynette -Bezel: lower part 2 pieces -Type: 79031/4 -Clamping width: 147 mm -Dimensions: see photo technical drawing -Shipping/Price: complete Blodozzqh Ejpfx Amrjn -Dimensions each: 340/55/H70 mm -Weight: 9.1 kg/piece

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg Blodswcwndspfx Amrjn

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 268 mm -Groove width: mm -Dimensions: see photo technical drawing -Dimensions: 285/85/H180 mm Bedpfsv Sqmtsx Amrsln -Weight: 10.8 kg

Condition: good (used), Bezel, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 272 mm -Holes: Ø 24 mm -Dimensions: see photo technical drawing Bodpfswyvbwox Amrsln -Dimensions: 300/125/H50 mm -Weight: 8.9 kg

Condition: good (used), Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Support plate: 265 x 180 mm -Dimensions: see photos -Dimensions: 290/280/H70 mm -Weight: 21.1 kg Blodev Tv Tnspfx Amron

Year of construction: 2007, operating hours: 8,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 80 mm, product length (max.): 80 mm, product width (max.): 80 mm, machine/vehicle number: 26240, This KSN Drum Washer 250 WRD is a used industrial cleaning system designed for reliable and efficient parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and can be integrated into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit the production requirements. Bljdpfxjzy Hd He Amron KSN drum washers are designed for many years of operation in industrial environments. Standard equipment: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Technical details can be found in the attached PDF document.

Year of construction: 2005, operating hours: 10,000 h, condition: ready for operation (used), functionality: fully functional, product height (max.): 100 mm, product length (max.): 100 mm, product width (max.): 100 mm, machine/vehicle number: 7614-23, This KSN Drum Washer 350 WRD is a used industrial cleaning system designed for efficient and reliable parts cleaning. The drum washing process provides consistent cleaning results while reducing manual handling and is suitable for integration into existing production lines. Choosing a used KSN cleaning system offers a significantly lower investment compared to a new system, combined with proven technology, fast delivery and the possibility of customization to suit specific production requirements. KSN drum washers are designed for many years of operation in demanding industrial environments. Bljdpfezy Hktsx Amrjn Equipment and features: Grundfos pump Fully insulated construction Automatic level and pressure monitoring Adjustable drum speed Technical details can be found in the attached PDF document.

Year of construction: 1986, condition: used, functionality: fully functional, Equipment: documentation/manual, BVL Rotocleaner 750 The cleaning and degreasing system with steam extraction fan and oil skimmer is in good used condition. Manufacturer: BVL Oberflächentechnik Year of manufacture: 1996 In 2011, the washing machine was completely overhauled, and the gear motor, heater, gas spring, and heating element were replaced. Automatic basket washing system with removable rotating basket. Basket diameter: 720 mm (internal diameter) Basket height: 140 mm (internal height) Maximum usable height (washing material): 450 mm Maximum batch weight: 500 kg External dimensions: Width 1190 mm, Depth 1170 mm, Height 1170 mm. Blodowzwfgopfx Amren Weight: 290 kg Operating manual, technical documentation, and CE declaration of conformity for the system are available. The housing of the cleaning system and the associated pipelines are made of stainless steel. Cleaning is performed using a special nozzle system with wide-band nozzles and a driven rotating basket. A U-shaped spray system ensures easy operation with high efficiency. The nozzles are supplied by a powerful circulation pump, which ensures intensive treatment and is equipped with a carbide mechanical seal. Heated tank in the lower part of the system. If the liquid level falls below a certain point, a fixed water connection ensures automatic refilling. This ensures safety for the heating elements and pump, as well as clean and precise dosing of the required amount of water. Internally located return baskets filter out coarse dirt from the washing liquid. A vapor extraction system removes steam before the hood is opened. The lid is supported by a gas spring. Easy-to-use filling system enables a fast workflow. Loading via crane is possible. Price: Negotiable Our asking price is €2,200.00 net ex works, plus packaging costs. All technical specifications are subject to printing errors and omissions. Sale is only to countries within the EU.

Year of construction: 2022, condition: used, functionality: fully functional, Single-Use Support Ultra-Freezer RoSS.FRDG Temperature range: +10° to -80°C Capacity: up to 300L Bodpfxszhuuvs Amroln Shelf system for 20L Meissner containers included Highest storage density for frozen biopharmaceuticals Easy installation and loading with frozen active ingredients Net weight: 600 kg Currently, up to 5 units are available for sale. The units are currently out of service and stored. The new price per unit was >40,000 EUR.

Condition: excellent (used), functionality: fully functional, Robust Möhringer slat conveyor system. Length 11.20 m. Slat length 2.0 m. Overall height 1.0 m. Bledezg Drnepfx Amren Equipped with integrated lifting and lowering transverse conveyors with 5 chain strands, hydraulically operated. Discharge to the left and right. 4 hydraulically lifting and lowering model support rollers. Split drive with 2 geared motors.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Bledpfsy Rlbnsx Amrsn Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: used, Spindle with carriage of 150 cm and feed by 2 rollers Note: Saw not working, the support bed is missing (see photo) Bjdpoz Ahc Aefx Amrsln

Condition: excellent (used), CATALOGUE NUMBER: 6507 TECHNICAL DATA PLANER: - roller width 510mm - rollers in the lower table - original cast iron fence, angle adjustable - table length 1810mm - both tables adjustable THICKNESS PLANER: - max thickness of workpiece on the thickness planer 200mm - guard on the thickness planer shaft from above: - pawls - toothed infeed roller - pressure roller - planing roller pressure roller - smooth outfeed roller from below: - 2 adjustable rollers in the lower table - 2 feed speed types Blsdpfx Amszu R Ekjrjn - main motor 2.95kW - dimensions L/W/H 1940x1200x1120mm - weight 970kg Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each Bsdpfx Amjtpkv Aorjln -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. Bsdpfx Amovxtcqerjln The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos Bsdpfxjri Unxj Amroln -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle, support clamp, flange clamp, support clamp -Pipe elbow/support clamps: 11 p. / 82 pcs. -Type: various versions, see photos/parts list Bsdpfsq N E R Rjx Amrsln -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H200 mm -Weight: 189 kg

Condition: new, load capacity: 3,000 kg, Various support blocks, rollers adjustable in 5 positions, suitable for heavy material. For transverse and longitudinal rotation. Bearing-mounted rollers insertable for longitudinal and transverse transport. Designed to relieve, for example, welding positioners or for transporting or rotating round parts. Available in various versions. Stepless height adjustment available on request. The beams themselves have a load capacity up to 6 tons. Price per piece. Prices from 450 €; with stepless height adjustment 850 €. Bedpfx Ajy Rf S Homrsln

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, GUTENBERG MASTER BAG 300X (2026) – PPWR-READY High-Speed Square-Bottom Paper Bag Machine High-speed, fully automatic roll-fed machine for producing square-bottom paper bags without handles. The MASTER BAG 300X is designed for industrial paper-bag manufacturers supplying food, bakery, retail, agricultural and European packaging markets. The PPWR-READY EDITION combines efficient bag production with controlled production recipes, approved-material management, batch traceability, waste monitoring and quality documentation. Main features Production speed: up to 180 bags/min Fully automatic roll-fed production Fully servo-driven control system Automatic paper feeding and tension control Precision tube forming and cutting Controlled side-seam and bottom gluing Automatic bottom folding and forming Automatic stacking and counting Multilingual HMI touchscreen Production of printed and unprinted bags Optional inline flexographic printing unit Suitable for approved kraft and coated-paper structures CE conformity for machinery safety PPWR-READY production package The machine can be configured to support the controlled production and documentation of paper bags designed for conformity with Regulation (EU) 2025/40 on Packaging and Packaging Waste—PPWR. Available functions include: Registration of paper supplier, grade and batch Recording of coatings, inks and adhesives Approved-material lists for each bag specification Password-protected production recipes Prevention of unauthorised material substitutions Customer, product and SKU identification Raw-material-to-finished-bag lot traceability Bodpfx Amjwzm I Rjrsln Operator identification and production timestamps Paper, adhesive, waste and reject monitoring Recording of dimensional and bonding inspections Production batch and traceability reports Support for technical documentation requested by EU customers Barcode or QR-code material identification option Camera inspection and automatic reject options Suitable applications Flour, sugar, rice, pasta and grains Coffee, tea, spices, lentils and nuts Dried fruit and bakery products Bread, pastries and takeaway food Grocery and retail paper bags Seeds, animal feed and pet-food products Herbal products, powders and supplements Hardware and small industrial parts PPWR-READY acceptance test Final acceptance can be performed using the customer’s actual paper, coating, printing ink, adhesive, bag dimensions and intended filling weight. The test can confirm: Dimensional accuracy Side-seam and bottom integrity Stable production speed Glue consumption Waste percentage Production traceability Batch-report generation Important regulatory information The MASTER BAG 300X is a PPWR-ready production platform. Final PPWR conformity applies to each finished paper-bag specification and depends on the actual paper, coating, ink, adhesive, components, intended use and recycling pathway. Machine CE conformity covers machinery safety and is separate from PPWR conformity of the finished packaging. Model year: 2026Machine type: Square-bottom paper bag machineBag type: Without handlesMaximum speed: Up to 180 bags/minCondition/configuration: Available according to selected equipment package Contact us for price, complete technical specifications, material trials, factory acceptance testing, installation, and delivery conditions.

Condition: new, Year of construction: 2025, VKM supplies spare parts for VKM, the complete Oswald product range, as well as selected Bezner-Oswald and Wema Probst machines, plus BÖGLI bandsaws and replacement knives manufactured to drawing specifications for a wide range of woodworking machinery. Some parts are available directly from stock. Below are some particularly frequently requested parts: Blsdpfowagxmjx Amron Centering rollers bore 40mm €112.00/each Centering rollers bore 50mm €156.00/each Feed roller bore 40mm €118.00/each Feed roller bore 50mm €138.00/each Exit roller bore 40mm €102.00/each Feed roller bore 50mm €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to prepare a quotation including commercial terms; further spare parts available on request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, total length: 16,240 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, 2 Abus overhead cranes – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2012 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m/M5 Dimensions – Span: 16,240 mm center-to-center – Installation height: 560 mm – Wheelset width including bumpers: 3,210 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Dead weight: 3,690 kg Bodpfez Eruljx Amrsln Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel with load display – Crane manual available: yes – Last maintenance: May 2026 – Condition: in good condition, dismantled but operational – Dismantled: no; October 2026 – 2 units available Steel structure including floor slabs and column-mounted slewing crane – Length: 32.5 m (approx.) – Year of construction: 2012 – Condition: in good condition – Dismantled: no; October 2026 Dimensions – Total length: 32.5 m (approx.) – Width (center-to-center) of crane runway: 16,240 mm – Total width: 16.7 m (approx.) – Distance from floor to top of 50×30 mm beam: 6,200 mm (approx.) – Column spacing: to be confirmed – Crane runway: HEA 260 – Columns: HEA 260 – Crane beam: 50×30 mm Includes – 16 x HEA 260 columns, height approx. 5,914 mm – Cross-braces – Floor slab measuring approx. 4.5 x 16 m – Floor slab measuring approx. 4.0 x 6 m – Column-mounted slewing crane with a lifting capacity of 1.6 tonnes

Condition: good (used), Miwe rotary ovens - used - year of manufacture: 2000, 2002, 2006 - 11 units available - for sheet metal 60 x 80 - gas burners - CS computer controls - from production - no warranty Blodpoz H Rv Dofx Amrsn - collection from the bakery / self-dismantling - price on request