Used Raster Pye 40 S1 for sale (26,103)

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Kjdpfx Anezvnfdjujnc Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s Ksdpfew Smukex Anujnc ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: excellent (used), functionality: fully functional, PYE 250 S1 hydraulic press. Kodjz Tc U Topfx Anuenc

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, pressing force: 40 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 380 mm, oil tank capacity: 300 l, total length: 1,150 mm, total width: 1,750 mm, total height: 3,050 mm, overall weight: 3,200 kg, distance between stands: 800 mm, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Knsdpfxjwbt Uqj Anuoc Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Kedpfjzn H Rvox Anusnc Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: good (used), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of construction: 1973 Type / Model: HR40NL Pressing force: 40 t Kedpjrdgncefx Anuenc Table: 650 x 385 mm ram: 350 x 190 mm Projection: 175 mm Distance table - bottom edge of plunger: 300 mm through hole: 350 x 130 mm ram adjustment: 80 mm Plunger stroke: 0 to 70 mm adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness continuous stroke: mm Stroke rate: 40 to 180 /min Connection: 4 kW Accessories/equipment: Pliers feed Condition: good Weight: approx. 4 tons Machine dimensions: 1,400 x 1,800 x 2,250 mm

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, pressing force: 10 t, stroke length: 400 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 500 mm, table length: 400 mm, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, total length: 1,300 mm, total width: 1,000 mm, total height: 2,350 mm, overall weight: 1,300 kg, Equipment: documentation/manual, PYE 10 S/1 hydraulic press with ejector. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Knedpfx Aewb Dhnsnujc Specifications: Maximum pressing force: 10 tons. Working pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Daylight: 630 mm. Cylinder stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Maximum force of the lower ejector: 4 tons. Stroke of the lower ejector: 160 mm. Power consumption: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Technical condition of the machine: very good. The machine has undergone a major overhaul.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Kodotzwxdopfx Anuonc Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: good (used), Year of construction: 2001, functionality: fully functional, operating hours: 7,300 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 175 t, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, distance table to ram: 720 mm, clearance between the columns: 3,550 mm, oil tank capacity: 350 l, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, overall weight: 14,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, table/punch distance, max.: 720 mm, 3 stop fingers, manually adjustable, 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, Keds Aa Nz Sspfx Anujnc annual maintenance and safety inspection carried out, last maintenance in 2025.

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Knodpezvfqkofx Anuoc Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Condition: used, Year of construction: 1971, pressure 40 t stroke . mm no. of strokes . Hub/min Ksdpfeyutuisx Anuenc The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1998, pressure 40 t stroke 250 mm total power requirement 6 kW Kodpfx Anovnwfnjuonc weight of the machine ca. 3 t distance between columns 600/350mm mm table surface area 860x620 mm ram surface 860x620 mm table height 900 mm

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Knedpfeygtzyjx Anusc

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Knjdpfx Anjvc Awxsusc Operation via two-hand control panel. (and one-hand operation) *

Year of construction: 1981, condition: not inspected (used), Feinbau Precision lathe S1-So/KA 40 -WKG 986- Offered here is a fully automatic precision lathe from Feinbau. Technical data: Manufacturer: Feinbau Type: S1- So/KA 40 Knjdpfx Anehg Nm Reujc Year of manufacture: 1981 center height: 134mm Swing over bed: 272mm Max. turning length: 200mm Chuck: Ø 110mm (3jaws) quill feed: 140mm (tailstock) Usage: The machine is suitable for boring or reaming cylindrical turned parts. Accessories: Loading magazine for cylindrical turned parts 28mm Ø 40mm long. loading device Internal cooling device

Condition: used, Year of construction: 1983, Technical details: Kedpsu Nfvujfx Anuenc Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m Knedpfx Answ D Awmousc manual counter *

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Knsdpfx Anozcyqmeuoc

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS Knodpfxsyw Rbye Anusc If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 cc Clamping Unit: Clamping force: 110 t Tie bar distance: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Kedpfxsz Ipzze Anuonc Control System: SELOGICA – Touchscreen Additional Equipment: Euromap 67 Robot interface 2 x air valve 1 x hydraulic core pull Control system with 8 hot runner zones Hardened injection unit – Bimetallic Proportional valve on injection unit – precise injection Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Wittmann W711 robot Year of manufacture: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; C axis – pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Robot purchase available at extra cost Dimensions: Weight: 5200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered will be started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Kedpfxe Aawrfe Anusnc Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Year of construction: 2019, condition: like new (used), The temperature control unit from technotrans is available for sale; the unit features high-quality equipment.....6 months warranty, .....Operating hours: 24 hours Medium: Water Temperature range: max. 140 °C Heating capacity: 6 kW Cooling capacity: 70 kW, indirect (heat exchanger) Pump capacity: 86 l/min Pump pressure: max. 5.5 bar Kjdpfsyub S Nox Anujnc Frequency inverter for pump speed control USB connection Touch display

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution Kjdjylhkyjpfx Anuonc The machine is fully operational and in good overall condition.

Condition: used, Year of construction: 1979, pressure 10 t throat 250 mm stroke 400 mm Knjdpfx Ajwbizyonujc feed down 100 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1986, pressure 160 t throat 360 mm stroke 500 mm feed down 200 mm/sec feed up 125 mm/sec max. distance table - ram 1000 mm table surface area 900 x 630 mm ram surface 850 x 450 mm clamping pivot 50 H7 / 85 mm total power requirement 17 kW weight of the machine ca. 7 t Kedpfsv Rgwxjx Anusnc dimensions of the machine ca. BxTxH 1,25 x 2,2 x 3,45 m