Used Röhm Duro-M 250 for sale (74,544)

Condition: like new (used), including additional supports Lrodpsz E H Hvsfx Ab Aju

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Lredpfx Abszz Amto Aeu

Year of construction: 2016, condition: used, Polymer/plastic type: mixed-color PP, process temperature: 250°C, viscosity at Tm: MFR 10-60, stroke: 30-120mm, end product: granules, throughput capacity: 1,200kg/h, filter fineness: 56, 75, 100 and 200μm, max. operating pressure: 200bar, including documentation. On-site inspection is possible, machine not connected to power. Lrjdpfx Aez R A R Ajb Aou

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Ledez Rnrrepfx Ab Aoru Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Ledpfx Abe Aawrfj Aeru Machine weight approx.: 8 t

Condition: used, Year of construction: 1998, Manufacturer: Gernal Model: HBV-K-M-250 Year: 1998 Condition: Used Serial Number: 98/00659 Stock Number: 3440 Volume: 4000 litres Capacity: max 2000 kg Diameter opening: 600 mm Lrsdpjz Ei E Isfx Ab Aeu Vacuum pump; Busch, RA 0063 Power: 3 x 380V, 50Hz, 4.8kW Dimensions: 3850 x 1550 x 2200 mm With Mikster MCM 023 controls. With hydraulic tilting system at backend to lift 150 mm for easy unloading.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF Lrjdpez Nv H Uefx Ab Asu - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 250 mm -Bolt circle: Ø 225 mm -Passage: Ø 76 mm -Dimensions: Ø 250 x 110 mm Ledozlcp Aepfx Ab Aoru -Weight: 25 kg

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Lsdpfx Abjx N A I Nj Aoru Various tool holders

Condition: like new (used), Year of construction: 2010, operating hours: 65,850 h, functionality: fully functional, machine/vehicle number: 61013689, clamping force: 2,500 kN, screw diameter: 50 mm, clearance between the columns: 630 mm, displacement volume: 432 cm³, injection pressure: 2,304 bar, injection weight: 393 g, Equipment: documentation/manual, As a dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine We also, of course, purchase well-maintained injection moulding machines manufactured from Ljdpfxsxqhuus Ab Aoru 2010 onwards We have been wholesalers of used injection moulding machines for over 25 years In light of recent developments – tax information and benefits for used machinery From 1 July 2025, used machinery will also be eligible for a special annual depreciation allowance of 30% for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine Keyword: Growth booster (Section 7(2) EStG-E) Currently in stock and tested at our Hanover warehouse Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed material: PE and PP – thermoplastics Extras - 2 x core pull (movable WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Pressure accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejection of cooled nozzle plug - Start handling during mould movement - Start-up sequence - Cycle time analysis - External USB keyboard - Graphical analysis – maintenance instructions - Electronic coding of injection unit - Pneumatic valve on BWAP blow-out - 12 temperature control points - Potential-free contact BDE - Process monitoring - Cycle storage - Trend graph - Target/Actual graph - PV control - Active back pressure control - From first owner - Origin: Germany Regular maintenance carried out by the manufacturer and previous owner Clamping unit Clamping force: 2500 kN / 250 tonnes. Column spacing: 630 x 630 mm Platen dimensions: 995 x 1050 mm Opening width: 820 mm Mould height: 330 mm min. Opening width max. 1150 mm Ejector stroke: 200 mm Ejector force: 57 kN max/26.3 kg Injection unit Screw diameter: 50 mm Injection volume: 432 cc Shot weight: 393 g/PS Injection pressure: 2304 bar Electrical Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg. Dimensions: 5.7 x 2.3 x 2.3 m. Complete documentation, manual and software Available immediately from our warehouse in Hanover, Germany, or free delivery subject to reimbursement of freight costs The machine is offered with a functional test certificate The machine is our sole property The machine in question is available immediately from our warehouse in Hanover, is offered in a functionally tested condition and can be viewed whilst powered up. Information about the machines we offer and our company - We only sell machines purchased from current production from our warehouse in Hanover - All machines on offer are inspected and tested prior to dismantling - We do NOT sell goods from insolvency estates - We are NOT a broker dealing in third-party property. - All machines on offer come from successful companies for whom maintenance and upkeep are a matter of course - All machines on offer can be viewed at our warehouse

Condition: used, Year of construction: 2009, operating hours: 5,207 h, functionality: fully functional, machine/vehicle number: MPC 250, saw blade diameter: 500 mm, cutting depth: 50 mm, cutting width (max.): 250 mm, power: 9 kW (12.24 HP), total height: 1,500 mm, total length: 21,000 mm, total width: 2,000 mm, type of input current: three-phase, overall weight: 3,150 kg, MODEL MPCNC 250 FAST Instal power [kW] 11,6kW (25A) Saw blade motor [kW] 5,5 Rools motor [kW] 3,5 Saw blade Dia [mm] 500 x 3,5 x 40, Z 92 Infeed rolls[piece] 6 Pressing rolls [piece] 6 Saw blade speed [m/s] 89,9 Saw blade revolution [min-1] 89,9 Cutting area s = 50 - 250 mm s = 100 - 180 mm Lrodpjz Ilttofx Ab Aou Outlet dia 2 x fi 120 mm Air (at 30m/s) 2400 m3/h Air consumpt (6.10bar or. 5 Pa) 270 NL/min Min cut (sec) 0,3 (0,12) Max feeding speed 240 m/min Max acceleration 32 m/s2 INPUT MATERIAL edged pieces Input length od 900 do 5000 mm Thickness - adjustableo od 15 do 90 mm

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Lrodpfxez Iqlbj Ab Aou Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Lsdpfxjyrczgj Ab Asru Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ljdpfx Abjz Ipnbj Ajru Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, For sale: KSB Sewabloc K 65-250 G V industrial pump with a 2.2 kW electric motor. Centrifugal pump, monobloc design, with flanged connections. Data from the nameplates: Manufacturer: KSB Model: Sewabloc K 65-250 G V Year of manufacture: 2012 Nominal flow rate: 6.22 l/s, approximately 22.4 m³/h Head at the nominal point: 8.05 m Motor power: 2.2 kW Power supply: 230 V Δ / 400 V Y, three-phase Frequency: 50 Hz Pump speed: 1455 rpm Ledjz Srhmepfx Ab Asru Impeller diameter: 170 mm Motor protection rating: IP55 Motor efficiency class: IE2 Unit weight according to the nameplate: approximately 103 kg Condition: used. Visible signs of use, localized paint chipping, and superficial surface corrosion. Appearance matches the photos. NOTE: THE STATED PRICE APPLIES TO ONE UNIT – ONE PUMP WITH MOTOR.

Condition: excellent (used), three-jaw chuck diameter: 250 mm, through hole: 75 mm, Diameter: 250mm 3 Chuck: x Spindle bore:75mm Lrodpfx Aezdidteb Aju Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle Lrjdpox Utc Iofx Ab Aju 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: good (used), functionality: fully functional, spindle bore: 37 mm, turning diameter: 250 mm, turning diameter over bed slide: 250 mm, center height: 125 mm, turning length: 1,000 mm, total length: 1,500 mm, total width: 800 mm, total height: 1,200 mm, spindle speed (max.): 2,000 rpm, rotational speed (max.): 2,000 rpm, Manufacturer: Harrison Model: M-250 Condition: Used Maximum turning diameter over bed: 250 mm Maximum turning length between centers: 1000 mm Spindle bore: 37 mm Maximum spindle speed: 2000 rpm Spindle mount: Camlock Toolholder type: Drehblitz Machine dimensions (L x W x H): 150x80x120 Connection voltage: 400 V Cooling system: Yes Lsdpfx Aex Rrpfjb Asru Digital readout: Yes, 2 axes

Condition: good (used), For sale: a used KSB KRTE 100-250/54UG-237 industrial submersible pump, complete with control box, cables, float switch, and chain. The pump is equipped with a side discharge nozzle with a Storz-type coupling and a base for positioning the unit. Lsdpfoz Spiwex Ab Ajru Data from the nameplate: Manufacturer: KSB Model: KRTE 100-250/54UG-237 Capacity as indicated on the nameplate: 27.78 l/s, approximately 100 m³/h / 1667 l/min Head: 14.8–9.5 m Rated power P2: 5.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rated current: 12.5/7.2 A Maximum medium temperature: 40°C Protection class: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.80 Weight according to the nameplate: 117 kg Pump serial number: 29 140 356 Motor serial number: 052236 Included in the set: Pump with motor. Control box with buttons and switches. Cables. CEE power plug. Float switch. Chain. Storz-type discharge coupling.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. Lodpfx Asz Spiqsb Ajru The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: good (used), Buderus 825 M-2500kw. Low temperature boiler Lrjdpfeu I Ruaox Ab Asu

Condition: excellent (used), CATALOGUE NUMBER 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max. blade diameter 400mm - blade bore diameter 80mm Lodpfozxqv Dex Ab Aeru - max. cutting height 140mm - table width with clearance 730mm - table length 2130mm from top: - pawls - pressure shaft, sliding - pawls - pressure shaft, smooth - shaft with saw blades - smooth, pressure shaft 4 pcs from bottom: - sliding, smooth shaft - pawls - track feed table + guide rail - roller width 460mm - feeder dimensions L/W 1660x630mm - overall dimensions L/W/H 2010x630x900mm discharge table - pulling rollers 8 pcs - roller width 800mm - overall dimensions L/W/H 4400x980x880mm - central lubrication - electric lifting of the machine body up/down 0.55kW - electric adjustment of the saw blade shaft 0.55kW - stepless feed rate adjustment 1-39m/min - feed motor 1.1kW - main motor 30kW - dust extraction nozzle diameter 210mm - overall dimensions of the multi-blade saw L/W/H 2520x1870x2000mm + control panel - total weight approximately 2500kg ADVANTAGES - German production - large cutting height - feed and discharge tables - used multi-blade saw, very good condition Net price: 89,900 PLN Net price: 20,907 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Ljdpfxjy Ipp Re Ab Aeru Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Carcass press for furniture manufacturing. Model: MPH 450/25/07. Collection possible from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Disassembly, loading, and transport will be arranged. Lrsdj Adub Espfx Ab Aeu Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: new, grinding wheel diameter 250 mm connected load frequency 230 V 90 - 180 U/min weight of the machine ca. 18 Kg dimensions 470 x 300 x 440 m Knife sharpening device with variable speed Lrodpfx Ajupxhcjb Aou Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm