Used Haton Moulder for sale (746)

Condition: ready for operation (used), Year of construction: 2013, WP Haton Crustica mediterranean production line for artisan type of bakeries Huge number of products can be made mediterranean or classic The line can be used for baguettes with premoulder or rounder for regular products By pass for intermediate proofer Sheeting of moulding possibility Different forming stations and decorating possibilities Products: Baguettes Iiodpfsu Upkdsx Aa Eod Whole meal Ciabatta Artisan breads Batone Brioche year of build 2013 max capacity 1500 pcs/h consisting of: WP V300 dough divider 1 pocket type 1000 year of build 2013 weight range 100 - 1200 grams Voluminator WP CR59 AT conical rounder year of build 2013 hot air, heating oil on cone weight range 90-1600 gr. WP AF 2002 intermediate proofer year of build 2013 long nets retraction belt Photocell controlled infeed conveyor UV lamps PLC with touch panel WP Combi U-L year of build 2013 stainless steel curling net standard version extended for pointed ends with driven top moulding belt and pressure board weight range 200 - 2000 grams WP make-up table

Condition: refurbished (used), WP CR59 conical rounder is suitable for many common dough types, such as wheat, wheat/rye, multigrain and whole wheat doughs. The dough pieces are being taken over by the rotating cone and shaped into round dough pieces by the specially shaped tracks. Because the tracks are mechanically processed, there is a very high precision between tracks and cone, which results in a minimum of dough crumbs. Iisdpfx Ajzh H Izsa Ejd hot air, heating weight range 400-1800 gr. max cap. 5000 pcs/h cast iron cylinder/cone, teflonized aluminium tracks, in- and outside teflonized cone with top bearing frame steel, nickel coated cover plates stainless steel, brushed undercarriage nickel steel with 4 castors, dowel pins and blocking operation control panel

Condition: refurbished (used), Year of construction: 1998, WP Parta ST dough divider 1-pocket type 1500 year of build 1998 weight range 200 – 1700 grams Iisdewgw Eqepfx Aa Eed max. capacity 1215 pcs/h

Condition: used, Year of construction: 2013, WP V500 1/2 dough divider 1 or 2 pocket developed for gentle and accurate dividing of a wide range of dough types. Suitable for wheat doughs, rye doughs containing up to 70% rye, and doughs with high water absorption. Doughs with long fermentation times and delicate doughs, with or without filling, can also be processed. year of build 2013 weight range 1 pocket 300 - 2600 grams-cap 1500 ph weight range 2 pocket 150 - 1200 grams-cap 3000 ph Dividing unit Ni-Resist with automatic oiling with 4 fixed dosing valves Voluminator Compact II Discharge conveyor cross 500 mm, with quick-lock system, scraper and catch tray Separate drive on in- and outside conveyor with drum motors Pneumatic discharge flap with plastic scraper Hopper stainless steel inside Teflon coated contents 120/180 ltr. Hopper base Teflon coated Oil catch tray underneath the machine Frequency inverter for variable speed of drive system Operation by means of touch screen Main piston Ni-Resist Automatic switch of in case of no oil Measuring pistons bronze Knife hardened steel Iisdpfx Aozghp Dja Esd Cover plates stainless steel, brushed, with Schmersal safety switches Frame steel, nickel coated Crankshaft and drive rods cast iron, nickel coated pictures BEFORE reconditioning

Condition: refurbished (used), Year of construction: 2015, WP Parta U dough divider 2-pocket weight range 110 - 1250 grams capacity 1230-2840 pcs/h frequency controlled Iiodpfxezgf T Ts Aa Eed year of build 2015

Condition: refurbished (used), WP Parta U dough divider 1 or 2-pocket weight range 1-pocket 300 - 2800 grams weight range 2-pocket 110 - 1250 grams capacity 1230-2840 pcs/h Ijdpfx Aozgf Hyja Eoid frequency controlled

Condition: ready for operation (used), Year of construction: 2009, WP V300 dough divider 1-pocket type 1500. Suitable for most common types of dough as well as sensitive doughs such as wheat, wheat/rye, stiff (pizza) doughs, as well as soft (French) doughs Iiodpezgd S Isfx Aa Eed year of build 2009 weight range 200 - 1800 grams approx. cap max. 1600 pcs/h Voluminator with low and high pressure setting

Condition: excellent (used), Year of construction: 2006, 097 USED Dough divider WP type V-500. TECHNICAL DATA: - 2-chamber divider, - range: 150 - 1200 g, - capacity: up to 3000 pcs/h The device is available to verify in our warehouse (36-068 Bachórz, Poland). Iedpfjwrzk Iex Aa Ejid Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: ready for operation (used), Parta SN-E dough divider 1-pocket type 1500 year of build H040197 weight range 200 – 1800 grams Iisdpfx Aaew I R Rzj Esd max. capacity 1600 pcs/h

Condition: reconditioned (used), Used dough divider WP HATON PARTA U2012 Universal Parta U2012 dough divider suitable for all types of dough, such as: wheat, wheat-rye, rye, hard dough (like for pizza), and soft dough (baguette type). Technical specifications: Dough piece weight range: 110-1250 g Fixed/variable output: 1,020 - 3,260 / 900 – 2,816 pcs/h Max. dimensions (L x W x H): 1,390 x 1,080 x 1,620 mm Connection: 230/400 V, 3-phase 50 Hz, 2.8 kVA Ijdpfjxgpzbjx Aa Esid Two pistons Advantages: Suitable for almost all types of dough Wide weight range: 110-2,800 g High weight accuracy Gentle dough handling Option: range up to 900g when using a 25 mm insert Optimal adjustability to mixer size Easy cleaning Multiple setting options Dough positioning on delivery conveyor is optimal for further processing.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 6 months, total width: 1,395 mm, total length: 1,178 mm, total height: 1,612 mm, empty load weight: 620 kg, year of last overhaul: 2026, PARTA U DIREKT WP Haton Dough Divider The PARTA U DIREKT dough divider represents a new generation of machines developed by W&P HATON based on years of expertise. This universal dough divider is suitable for all types of dough, including wheat, mixed wheat, rye, stiff doughs (such as pizza), and soft doughs (such as baguette). An exceptionally precise, versatile machine with proven long-lasting reliability, it is ideal for handling almost all dough types and suitable for most bakeries. Key Features: - Interchangeable conveyor system allowing for direct depositing into trays - Gentle dough handling - High weight accuracy - Wide weight range: 110–1000 g - Robust drive system and dividing mechanism - Wide weight range - Tiltable hopper for easy cleaning - Easy access to all components for cleaning and maintenance - User-friendly operation Iedpfx Aoygw Idoa Eeid Technical Data: - Portion weight range: 110–1000 g - Constant capacity: 1850 or 2100 pcs/h - Variable capacity: 925–3150 pcs/h - Installed electric power: 2.4 kW - Dimensions (L/W/H): 1395 x 1178 x 1612 mm - Net weight: 620 kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: H_511869, warranty duration: 6 months, year of last overhaul: 2025, WP Haton BM51-B Iedjxzzz Nopfx Aa Eoid

Condition: ready for operation (used), Year of construction: 1998, WP CCR59 conical rounder in Kemper execution is suitable for many common dough types, such as wheat, wheat/rye, multigrain and whole wheat doughs. The dough pieces are being taken over by the rotating cone and shaped into round dough pieces by the specially shaped tracks. Because the tracks are mechanically processed, there is a very high precision between tracks and cone, which results in a minimum of dough crumbs year of build 1998 type M2 weight range 300-1700 gr. cold and hot air max cap. 5000 pcs/h Iisdpfx Asw Ic E Dea Eed cast iron cylinder/cone, teflonized aluminium tracks, in- and outside teflonized cone with top bearing frame steel, nickel coated cover plates stainless steel, brushed undercarriage nickel steel with 4 castors, dowel pins and blocking operation control panel

Condition: used, Moulder IDC000075 - manufacturer: Wadkin Iiodpfetwy T Rjx Aa Eod - model: GA 220 - 4 years ago made renovation

Condition: used, Year of construction: 2011, Dough divider 1-pocket type 1500 year of build 2011 weight range 200 - 1800 grams capacity 500-1600 pcs/h frequency inverter for variable speed Isdpfxjiy S Ans Aa Eoid

Condition: used, WP Haton bread line consisting of: WP Parta U dough divider 1-pocket type 2001 weight range 300 - 2800 grams capacity max 1140 pcs/h year of build 2008 Iijdpfx Aasq I Abvo Esd WP conical rounder hot air weight range 200-1000 grams cap. 3600 pcs/h year of build 1998 WP Haton BIP intermediate proofer 12-row 30 swings 12 piece contents gross 360 dough cups automatic climate control weight range up to 1800 gr Benier Beversal dough moulder weight range 50 -1200 grams output max 1600 pc/h

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Iiedpfxewt Tnhe Aa Eed Retactable belt. Belt dimensions 700mm W x 29mm L

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm Iiedozk Nn Ajpfx Aa Ejd - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 1991, working width: 220 mm, spindle diameter: 40 mm, working height: 120 mm, total width: 1,500 mm, total height: 1,500 mm, total length: 3,900 mm, overall weight: 2,000 kg, jointer table length: 2,000 mm, number of spindles: 4, chip removal: 10 mm, No. 04530 Four-sided planer and moulder WEINIG Quattromat 22 Used, year of construction 1991, very good condition, machine comes from a one-man workshop Four-sided planing and moulding machine with continuous feed Spindle configuration: 1st spindle bottom / 2nd spindle right / 3rd spindle left / 4th spindle top Infinitely variable feed 6 - 22 m/min Infeed table length 2000 mm Working width 25 - 220 mm Working height 6 - 120 mm Max. material removal 10 mm Diameter of the spindles 40 mm Motor power of the 1st spindle bottom 4 kW Combined motor power of the 2nd spindle right and the 3rd spindle left 5.5 kW Motor power of the 4th spindle top 5.5 kW Serrated steel infeed rollers Isdjzl Uukspfx Aa Esid Rubber outfeed roller Rubber roller in the table Including operating tools and spare rollers Including operating manual as a .pdf-file Transport dimensions approx. 3900 x 1500 x 1500 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Ijdpfx Ajzl Hbija Eeid Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left Isdpfx Asyyqnloa Eeid ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Iiedjxz Hh Ujpfx Aa Eod Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm Isdewwl Nljpfx Aa Eoid T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm Iijdpfx Ajxpn T Uoa Ejd > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, total length: 1,150 mm, total width: 900 mm, total height: 1,800 mm, Colour: Green Empty weight: 400 kg - Documentation available: No - CE certificate present: No - Spindle diameter [mm]: 25 - Table length [mm]: 1150 - Table width [mm]: 900 - Tiltable spindle: Manual - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Holz-her - Number of wheels [pcs]: 3 - Tool key included: Yes - Tools (milling heads) included: Yes - Spindle speed: Manual - Min. spindle speed [rpm]: 1400 - Max. spindle speed [rpm]: 1200 - Voltage [V]: 400 - Fuse [A]: 32 - Transport dimensions: 1150mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Iisdpfx Aey Nc Aaja Ejd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels