Used Wemas Vzg 65-5A (Bgl. Axon Lu620/ Litz Lu620) for sale (8,456)

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2014, emission class: euro5, color: red, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal no.: 1106 * MB 516 Sprinter * VDL body * Mid-City * Lettering - V I N Y L - the vehicle is fully wrapped * Class M3 * Water pump and V-belt / idler pulley replaced new in 02/2024 * Automatic transmission * TELMA RETARDER * Driver's air conditioning * Passenger compartment – A/C * Auxiliary heater / stationary heating Iedjnp Dhuopfx Aqusau * Convector heating * Seats: 15 * Standing places: 12 * Vehicle speed approx. 99 km/h * Standing places * Manual folding ramp * Inspection book available * Length: 7.361 m * The vehicle has minor body damages – see pictures * More photos available on request * Front axle tires in good condition. * etc. * All information without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: used, mileage: 142,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 06/2018, emission class: euro6, color: white, brakes: retarder, number of seats: 15, Equipment: ABS, air conditioning, parking heater, * Our internal ref.: 1093 * Well-maintained vehicle * (Two identical vehicles available) * Sprinter 516 * Original EVOBUS bodywork * City 65 * RETARDER. TELMA * LOW GENUINE MILEAGE – VEHICLE ONE OWNER * LED matrix display: front / side / side / rear with control unit * Bus lifting system * Auxiliary heater * Stationary heating * Driver's cab air conditioning * Passenger compartment air conditioning * 2 fold-down seats Ijdpfx Ajyxi Riequeau * Double glazing * Convector heater * Manual folding ramp * Pre-installation for interior monitor (the monitor and cash register/printer shown will be removed prior to sale) * Clean vehicle * Vehicle in operation – mileage and condition may vary. * ALL INFORMATION WITHOUT GUARANTEE * INTERIM SALE RESERVED * PLEASE REFER TO OUR TERMS AND CONDITIONS. These are part of the sale!

Condition: used, mileage: 634,200 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2013, emission class: euro5, brakes: retarder, number of seats: 11, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1042 * Sprinter 516 * Original EVOBUS City 65 * Automatic transmission * Large passenger compartment - air conditioning * Driver's seat - air conditioning * Auxiliary heater / parking heater * Technical repair history includes: * Torque converter €1,114.78 * Reversing gear €3,900 * Automatic transmission €4,796.33 * Door drive with motor €2,025 * New rear axle air bellows 11/2022 * Headlights * TELMA €5,933.40 * Differential 1,159.52 * DIESEL ENGINE - Exchange €9,114.33 / February 10, 2022 * New front brakes 03/2023 * New front brake discs 05/2022 * New starter 02/2022 * Diesel particulate filter exhaust system 02/2022 * New front and rear engine mounts 02/2022 * New intercooler 02/2022 * New viscous fan 02/2022 Iasdetqk Hfjpfx Aquju * New air conditioning compressor 06/2022 * Intercooler / charge air hose / 10/2022 * etc., ... List of €41,355.17 is available! - * Matrix * Cruise control * Convector heater * Mechanical folding ramp * Driver's compartment protective screen * etc. * All information without guarantee * We reserve the right to sell prior to sale * Please refer to our terms and conditions

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 05/2010, Equipment: ABS, Meiller 2-axle tipping trough, MHPS 41/2, roll-on tarpaulin platform, air suspension, lift axle, BPW axles, tires 425/65 R22.5, Wabco SmartBoard, ABS Empty weight 6,120 kg Iedpfx Aqev Hk Hcjujau

Condition: used, mileage: 260,356 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGA 28.500 6x2BL Gergen Roll-off Tipper VIN: M812898 Max. container length: 6.50m Chassis / Attachments: * Leaf/air suspension * 3rd axle lift axle, twin tyres (10t) * Wheelbase: 1-2 = 4,500 mm / 2-3 = 1,350 mm * Tyres: 385/65 R22.5 * Tyre tread depth remaining: axle 1: 70% / axle 2: 10/20% / axle 3: 20% * 1 x diesel tank * 1 x hydraulic tank * 1 x AdBlue tank * Alcoa aluminium rims Body: * Gergen hooklift GRK 21/65 Ion * Roll-off tipper prepped for retractable crane * 2-way hydraulics with quick-release coupling at rear, incl. side oil cooler * 4 mechanical container locks Cab / Driver’s compartment * Flat, long cabin * Roof hatch * Refrigerator * Climate control system * Stationary air conditioning * Auxiliary heater * Hands-free kit * BT, AUX, USB * Distance control * Lane assist * Cruise control * Partial leather seats * Lightfix lamp bar with 4 spotlights * 2 x air horns Engine / Transmission * 368 kW // 12,419 cm³ // Euro 6c * ZF-AS Tronic / automatic * Engine brake * Differential lock Weights * Gross weight: 26,000 kg * Payload: 13,990 kg * Unladen weight: 12,010 kg Other * German vehicle * 1 previous owner * New roadworthiness certificate (TÜV) available upon request New main inspections / safety inspections or changes to gross vehicle weight (downgrade/upgrade) are available on request. We are pleased to assist you with export/transfer number plates, and vehicle delivery within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to change, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Ijdpfxewnk Dvo Aqujau The particular strength of Leible Nutzfahrzeuge is the sale of new and used commercial vehicles. On our 11,000 m² premises, you’ll find a large selection of vehicles. Our company philosophy is characterised by fairness and integrity. Since customer satisfaction is very important to us, we provide our customers with an excellent all-round service package and assign a competent contact person to guide them through the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organising special transports We are happy to assist you with the organisation of special transports. Temporary / Export number plates We are happy to assist you with obtaining export or temporary number plates. Customs clearance We are happy to assist you with customs formalities.

Condition: used, mileage: 44,185 km, power: 87 kW (118.29 HP), first registration: 05/1993, fuel type: diesel, empty load weight: 4,650 kg, maximum load weight: 2,250 kg, overall weight: 6,900 kg, tire size: 8R17,5, axle configuration: 4x2, wheelbase: 3,000 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: none, suspension: steel, Equipment: additional headlights, cabin, differential lock, fog lights, Vehicle location: Bovenden, Doka, switch 5, differential lock, fog lights, rotating beacon, storage box, leaf suspension Wheelbase: 3000 mm Body: LF 8 fire engine with FP 8/8 front-mounted pump Sale to tradesmen or export is subject to 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Isdpfxevhku Aj Aqueau - .

Condition: used, empty load weight: 3,710 kg, maximum load weight: 14,290 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2016, next inspection (TÜV): 02/2025, loading space length: 6,500 mm, loading space width: 2,300 mm, loading space height: 1 mm, suspension: air, tire size: 315/80R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, ABS (anti-lock braking system), U-protection, twin tires, stanchions Iodpfxjvaicve Aqujau Construction: 2-axle timber transport trailer with 4x Exte bolsters, 2x 10t BPW axles, drum brakes! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, mileage: 160,847 km, power: 162 kW (220.26 HP), first registration: 02/2016, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, crane, soot filter, Renault D14 220 3Skipper + Effer 65 2S crane Ijdpfx Aqoyyrq Iousau Suspension: leaf-leaf Wheelbase: 3.75 m Effer crane Type: 65 2S 3x hydraulic extension 2x stabiliser points We are also happy to assist you with financing/leasing options through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, power: 37 kW (50.31 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 4,700 kg, empty load weight: 4,260 kg, maximum load weight: 440 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2000, brakes: other, Year of construction: 2000, operating hours: 6,320 h, driver cabin: day cab, wheelbase: 1,950 mm, Equipment: additional headlights, all wheel drive, cabin, pallet forks, * German machine * 6,320 operating hours * All-wheel drive * Condition: see photos * Articulated Komatsu WA 63 - 3 * Turning radius 3,640 mm * Articulation angle 40° * Hydraulic 4-point quick coupler * Loading bucket 0.7 m³ - bucket width 1,850 mm * Bucket pivot height 3,115 mm * Planetary axles with automatic differential locks on both axles * EasyDrive (Hydrostatic drive) (SN) * 1st speed range 0 - 5.6 km/h - 2nd speed range 0 - 20 km/h * Hydrostatic steering * Working pressure 200 bar hydraulic * Power-assisted hydraulic controls * Towing hitch * ROPS and FOPS comfort cab * Double-door safety cab according to DIN/ISO * Easy operation via multi-function lever * Comfort driver's seat * Delta lift arm * Sliding window on the right * Heater * Heated rear window * All-around glazing * Optimal noise insulation Ijdpfx Ajzcbumequoau * Engine: Komatsu Type Komatsu 4D 94E - 37 kW - 2,775 cm³ * Easy maintenance * Wide-opening engine hood * Side maintenance flap * Wheelbase 1,950 mm * Track width 1,450 mm * Weight 4,700 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Ijdpfx Aqshvz D Hjuoau Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Type: PL 38 Ijdpfx Aqsnfvlyeuoau Included in delivery are: 01x pallet rack upright, used material color: sendz. galvanized type of upright: P 20 upright profile dim.: 90 x 65 x 2.0 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 4.800 mm high 900 mm deep Note: The yellow upright protectors are not part of the delivery delivery scope, but can be purchased as an option.

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Iedpfjhwduxex Aqusau Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Type: PL 38 Included in delivery are: 01x pallet rack upright, used Material color: sendzimir galvanized profile dim.: 90 x 65 x 1,80 mm Iedpfx Aqjh Svtpeuoau Profile type: SP18 Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 2.030 mm high 1.100 mm deep

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: Iajdpfx Aqohwdu Hsueu The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: Ijdpfx Aei Enyuequjau 01x Shelf connector, used Shelf system: Nedcon type: NS suitable for frame profile width: 100 mm for shelf distance: 300 mm profile dim.: U 65 x 40 mm weight: 0,83 kg | pcs.

Condition: used, fuel type: diesel, Year of construction: 2023, operating hours: 615 h, Drive: Track Please contact Kristoff Van Havere for more information Iaodpfxszb Uihe Aquou - Hydraulic quick hitch CW10 - Bucket 1400mm with twin connect - Auxiliary pion for hammer and sorting grab - Central grease system - Cab with radio and airco

Condition: used, WEMA Probst profile milling machine Hauptmtor 11kW dismantled and reverse loading ready Iedoc N N U Njpfx Aqujau

Condition: used, Year of construction: 2008, functionality: fully functional, volume flow: 40 m³/h, centrifugal vertical cantilever pump chemical pump FIP ALPHA 65-40 V2CM year of construction: 2008 DN: 50 Iajdpfx Aqsufhzpjuou Nominal flow rate 40 m³/h Nominal head: 45 m p [track]: 16 T [°C]: -25 ÷ + 140 Turn number: 1470 electrical power 16.5KW 400V 50Hz 34.7A engine speed: 1470 Implementation: vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries length: 1700mm width: 700mm weight: 450 kg

Condition: used, functionality: fully functional, color: gold, operation weight: 6,600 kg, Year of construction: 2018, operating hours: 4,200 h, Equipment: rubber tracks, JCB 65-R1 Mini Excavator Year of manufacture: 2018 4,200 hours 6,600 kg Perkins engine Powertilt HS03 Swing arm Iajdszb A T Ijpfx Aquju Fueling pump

Condition: used, Double-crimping press with 2 benches of cm. 110 x 65 Iaedpfx Aqezb A N Nousu

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Ijdpfx Aqezacd Rsujau Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Code: 0355 Brand: AVOLA - GERMANY Iaodpfx Aoy A S Dtoqueu Model: GAMA 65 K - CE Standard Cutting centre for timber joinery, beams, timber roofs, sawmills, balconies, garden furniture and various – CE Standard Technical data: Lower cross-cut saw with rotating table and tilting blade Vidia blade diameter mm 650 Hole 30 Pneumatically operated safety cover Motor 10 Kw Motor speed 3000 rpm Pneumatic clamping cylinders Pneumatic cross-cut device with two-hand control Electric blade tilt adjustment 90–30° with flat digital display 5–175° Cutting height at 90° 245 mm Cutting height at 45° 164 mm Cutting height at 30° 113 mm Laser cutting guide Table dimensions mm 1500 x 1500 Work table height mm 1000 Handling brackets for forklift truck Right Roller conveyor mm 3000 x 600 - Support guide 5000 mm Left Roller conveyor mm 3000 x 600 - Support guide 5000 mm Overall dimensions of assembled machine mm 10850 x 2000 x 1700 h Overall dimensions for transport mm 2600 x 2000 x 1700 h + Stacked roller conveyors mm 5000 x 1000 x 2000 h

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 Iaodpjwp D Nbsfx Aqusu number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm Isdjx E Dncopfx Aqujau - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: used, Year of construction: 2014, machine/vehicle number: S6F143651, FANUC 31iB control system, power 29 kW, main and counter spindle, spindle speed max. 5,000/7,000 rpm, travel distances X/Z = 260/610 mm, 12-position tool changer with powered tools (VDI 40), max. turning diameter/turning length = 320/550 mm, part ejector, operating hours approx. 400 hours. Iodpfxsy U R Nxe Aqueau