Roll-off tipper truck

MAN TGX 26.500 6x2-2 BL*Gergen 21/65*Ladekranvorb.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Predov Sa I Tjpfx Af Sob In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: used, functionality: fully functional, mileage: 238,700 km, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, Year of construction: 2009, Equipment: air conditioning, crane, MAN AG 26.360 6x2 - Year 2009 DIESEL/ Euro 5 Mileage: 238,700 km Prodpfx Aezwc R Def Ssb Automatic transmission/ Engine displacement: 10518 cc/ Power: 265 kW GVW: 260 quintals Payload: 11,030 kg/ Wheelbase: 3,900 mm Accessories: - Air conditioning Equipment: - Tipper body: 5110x2550x1380 mm (H) - PM 28526 SP crane + J614.20 antenna (6+4) * Outriggers, hydraulic * Radio

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Prsdpou Agh Sjfx Af Seb For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles Pedpfjt N Antox Af Ssrb - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Pjdpfotu U Ebox Af Serb

Condition: used, Technical details: x-travel: 600 mm Podpfx Afou U E T Ij Sjrb y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: excellent (used), mileage: 131,000 km, first registration: 04/2018, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,400 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, = Additional options and accessories = - Air horn - Air suspension - Aluminium fuel tank - Central lubrication - Heavy duty engine brake - Low-noise - PTO - Reversing camera - Speed limiter - Toolbox - Vehicle heater - Visor - Xenon lighting = More information = Psdpfjx Ifptjx Af Ssrb Axle configuration Front axle 1: Steering Rear axle 1: Lift axle; Steering Weights Empty weight: 23.375 kg Carrying capacity: 13.625 kg GVW: 37.000 kg Functional Crane: HIAB XS 422 E-8 Hipro, year of manufacture 2017, behind the cab Pump: Yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request

Condition: good (used), Year of construction: 2005, Used cutting machine Lectra Vector 5000 Fashion V3 - year 2005 - Useful cutting width 180 cm. - translating - new inverter device - in good condition. Podpfxsrtnccj Af Sorb

Condition: good (used), mileage: 167,000 km, power: 405 kW (550.65 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: EBS, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), parking heater, trailer coupling, = Additional options and accessories = - Air Suspension Seats - Aluminium fuel tank - Cabin - Climate control - Coupling - Disc brakes - Heated Mirrors - Heavy duty engine brake - Passenger seat - PTO - Radio/cassette player - Radio/Cd/Audio system - Refrigerator - Side skirts - Stability control - Sunroof - Toolbox - Vehicle heater - Voice Control = More information = Front axle: Steering Podpjy I U R Hsfx Af Sorb Rear axle 1: Lift axle; Steering Empty weight: 22.375 kg Carrying capacity: 13.225 kg GVW: 35.600 kg CE mark: yes Technical condition: good Visual appearance: good

Condition: used, Year of construction: 2014, Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 Predpfx Asx Hwhxof Sob - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels