Used Timber Frame Butterfly Station for sale (14,635)

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Gbedpoydfllsfx Ak Ust Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: like new (used), Year of construction: 2025, functionality: fully functional, COST-CUTTING OPTIMIZING SAW The Supercut 500 is a high-speed optimizing saw designed to deliver maximum production capacity with outstanding reliability. EXTREMELY ROBUST The machine features a highly robust, reinforced steel frame. The infeed belt conveyor is synchronized and driven by the same motor as the feed rollers. An exclusive system ensures solid double-sided top and bottom traction. The upper feed system includes three hardened, toothed drive rollers and six idle pressure wheels (in three pairs). Each toothed roller's rise and descent are managed by numerical control. TECHNOLOGICALLY INNOVATIVE The electronic system integrates a computer directly connected in real time to a next-generation CNC (numerical control unit). The TROPTIM software runs on Windows and offers full management of up to five wood grades. Equipped with a 22” color LED display, remote internet teleservice, and integrated Excel macros. FAST An innovative cutting system achieves such high speed that the blade is almost invisible during operation. Rapid, comprehensive optimization with a compact overall footprint. Feed system equipped with an 18 Nm brushless servo motor. Cutting system uses a 28 Nm brushless servo motor. Saw blade power: 7.5 HP (5.5 kW). Eight idle rollers positioned under the belt of the infeed conveyor. Gedpfx Akey Iz Hnj Usbt CUTTING DIMENSIONS Cutting section: min. 30x15 mm, max. 220x60 mm. Minimum workpiece length before cutting: 500 mm, maximum: 5000 mm (up to 6000 mm with optional support rollers). Capability for a single cut in the last 190 mm of the board. Suitable for boards of regular profile with a maximum thickness variation of 8 mm. Maximum timber weight: 50 kg.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Gedpfsyu Uq Eex Ak Uebt Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial timber processing Condition: good Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Godpfsfi Tg Hjx Ak Uobt Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: good (used), Year of construction: 2021, Radio Shuttle Pallet Rack, 2 blocks with 312 pallet positions each (total 624 positions), max. pallet weight 1,000 kg, for Euro and industrial pallets, 3 pcs. Stow Atlas 3.1 shuttles – used -: Price for 2 blocks and 3 radio shuttles ex location: €49,950 (net), incl. dismantling etc.! Price for 1 block and 1 radio shuttle: €25,000 (net), incl. dismantling etc.! Additional radio shuttle price: €15,000 (net). Rack manufacturer: Stow Model: Atlas Shuttle 3.1 / Radio Shuttle Rack Year of manufacture: 2021 Frame type: PLFB 15 Pallet type: Euro or industrial pallet Clear bay width: 1,350 mm Beam type: SRBH 0488 Channel rail type: SRR 0130 Frame height: 6,300 mm Number of channels / Euro pallets stacked: 4 Number of Euro pallets in depth per channel: 13 (11 industrial pallets) Permissible pallet load: 1,000 kg Permissible bay load (sum of all channel loads): 52,000 kg, or 44,000 kg for industrial pallets Permissible channel load (evenly distributed per rail pair): 13,000 kg, or 11,000 kg for industrial pallets Max. clear shelf height: 1,545 mm Gjdpfox N H Awjx Ak Uobt Per block: 6 rows, 4 levels vertically, 13 Euro pallets in depth = 312 pallets per block Radio Shuttle Incl. charging stations and remote controls Type: ATL3.1/1200/1000N Year: 2021 Dead weight: approx. 300 kg Operating temperature: +5°C to +35°C For pallet size: 1 m x 1.20 m x 1.50 m Max. pallet weight: 1,000 kg New price per radio shuttle: approx. €25,000 (net) Condition: very good Available from: approx. mid-January 2026 Location: Saxony

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Gbjdoyaq S Aepfx Ak Ust Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system Gedpfxeyzxfns Ak Ujbt - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: used, Year of construction: 2007, machine/vehicle number: MR007003, For sale: A very complete Weinig Powermat 500 (year of construction 2007). Thanks to the increased planing capacity (300x160mm) and extensive mechanization, this is the ideal production line for professional woodworkers, carpentry workshops, or timber frame construction companies. Installation can be arranged upon consultation. Key specifications: - Large capacity: Maximum processing size of no less than 300 x 160 mm (ideal for heavy timber, joists, and wide parts). - Spindle arrangement (5 axes): Bottom (11 kW) – Right (7.5 kW) – Left (7.5 kW) – Top (11 kW) – Bottom (7.5 kW). - Including oscillating axis: Equipped with a moving spindle with an input measuring system. Enables efficient processing of boards with varying/tapering widths with minimal wood loss. - Combined spindle mounting: Equipped with a PowerLock quick-change system on both bottom spindles and the top spindle. Conventional mounting ø 40 mm side spindles. - PowerCom Control: Graphic touchscreen for quick profile changes and digital management of tool settings. Gbodpfx Akezwv Euo Ust - 1-Man Operation: Including automatic return system. - Including accessories: Supplied with straight planing heads (bottom jointing cutters) and an extra horizontal PowerLock axis. Machine manuals are available. Technical specifications: - Number of planing axes: 5 - Order of planing axes: B-R-L-B-B - Maximum planing width: 300 mm - Maximum planing height: 160 mm - Feed rate: 5-30 /min - Serial number: 109200

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Welding robot Qirox QRC 320 incl. V7 control system and programming handheld device with cable, connection cable robot control cabinet, tactile sensor, arc welding search, point editor Cloos welding machine Qineo Puls 600, wire feeder, welding torch, torch hose package, mechanical cleaning, torch testing gauge OPTION: Motion weld equipment and Qineo Next 452 Gbedozrpf Dopfx Ak Ujt 1 cell base frame incl. partition walls 1 two-station indexing table incl. 2 rotating-swiveling manipulators Load capacity 250 kg/station, rotation radius 500 mm 1 light barrier, 1 start box, arc protection on the indexing table, 1 service door with end-of-travel limit switch, connection control integrated Documentation, manufacturer's declaration Delivery date: possible within 8 weeks. Subject to prior sale.

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors Gbedpfxoyl Upvs Ak Uot · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. Gedpfx Akeyvgias Usbt The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: excellent (used), Year of construction: 2006, CNC WORKING LINE FOR DOOR FRAMES, comprising: 1 HORIZONTAL LOADING TRANSFER MOTORIZED, model 0190 T.C Loading buffer with horizontal transversal belts and motorized rollers with variable speed control. 1 gasket insertion unit on a horizontal groove, consisting of: - 2 motorized gasket roll holders - 1 pressure roller insertion unit - 1 cutting unit positioned near the end of the profile 1 cutting/drilling machine for finished cuts, model 01TFRD SPECIAL, referencing the upper workpiece. Suitable for cutting, drilling, milling, and hinge (anuba) insertion on door jambs. MACHINE CONFIGURATION: Worktable constructed of a solid steel frame, with a fixed left section and a movable right section. Electronically controlled positioning system, supporting a total of 6 machining units: 2 on the right, 2 on the left, and 2 on the upper bridge. 1 CENTRAL MOTORIZED SHUTTLE with CNC control for milling the ends of jambs. 1 HORIZONTAL RADIAL CUTTING STATION, 0-45°, quick tilting with selector, featuring 2 groups (one per side). Each side with its own motor, including a timed entry system to prevent double cutting positions. Cutting motor power: 5 HP – 3000 rpm – inverter-controlled. Cutting blade bore: 30 mm. Saw blade diameter: 370 mm. Adjustable extraction hoods and safety guards. 1 HORIZONTAL HEAD DRILLING STATION 0-45°, fast vertical tilt with selector, with 2 groups (right and left). 2 HP motor, 3000 rpm. 7-spindle drilling head with 32 mm pitch. Individually selectable spindles. Groups travel on linear guides for increased speed and drilling accuracy, with longitudinal and vertical adjustment capability. 1 UPPER VERTICAL ROUTING (PANTOGRAPHING) STATION, on a transverse bridge, with 1 motor for counterplate slotting, 2 HP, 12,000/18,000 rpm. Vertical, horizontal, and depth (x-y-z axis) movements are CNC-controlled, utilizing precision linear guides and recirculating ball carriages. Equipped with tool holder collet. 1 HORIZONTAL ANUBA DRILLING STATION, with 1 CNC-positioned motorized unit moving in conjunction with the router. Includes a drilling unit, custom Anuba inserting unit, and custom Anuba feeder with approx. 35 piece capacity (depending on Anuba diameter). Gbsdpsygcmfefx Ak Ust 1 LINE CONTROL COMPUTER Capable of importing data (CSV or ASCII) via MMC (Memory Card). Note: The imported data will be used for automatic positioning and execution of processing steps as per the job list. Workpiece dimensions: Minimum length: 580 mm (45° internal for frame) Maximum length: 3000 mm (45° external for frame) Minimum thickness: 30 mm Maximum thickness: 60 mm Minimum width: 75 mm Maximum width: 300 mm

Year of construction: 1986, condition: not inspected (used), Vacuum filler Make: EME (Engler) Type: automatic 27 station rotary Vacuum filling Machine Modell: V27 Capacity: up to 22.000 fill / hr Frame: Stainless steel 1.4301 (AISI 304) Godpsib A H Sjfx Ak Usbt Tooling: 99mm Dimensions: L x W x H = 2.100 x 1.800 x 2.400 mm Features: No can / No Fill System Safety guarding with doors vacuum tank Central hight adjustment as-is or tested and set to customer choice

Condition: used, mileage: 183,000 km, power: 84 kW (114.21 HP), first registration: 05/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,926 mm, total width: 1,993 mm, total height: 2,612 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, For sale is a well-maintained Mercedes-Benz Sprinter 311 panel van, L2-H2, equipped with the globally popular 2.1-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 emission standard * First owner * Complete service history * N1 truck registration Equipment: Panel van L2-H2 * Air conditioning Gbjdpfx Akjz Achtj Ust * Auxiliary heater * Navigation system * Passenger airbag * Parking sensors front + rear * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: 2180 KG * Payload: 1320 KG * Trailer load: 2000 KG Why are we the right choice? Attractive financing options through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day / customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone a thorough maintenance service. Of course, this includes new fluids, filters, and other expenses that you don't need to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We hope to have piqued your interest and are available to you around the clock. If you have any questions, comments, or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special equipment: 1 DIN slot in the front under the headliner, Airbag passenger side, Audio system Audio 15 (radio with color display), Outside temperature display, Additional battery (reinforced), Window for rear doors, Window for rear doors in black glass, Heated rear window, Window in the cargo/passenger compartment: - sliding, front left, Window in the cargo/passenger compartment: - sliding, front right, Generator 180 A, Rear door (opening angle 270 degrees), Wooden floor in the cargo area, Steering wheel (adjustable steering column), Navigation system Becker MAP Pilot, Parameterizable special module, Parktronic system (PTS), Spare wheel in driving condition, Spare wheel carrier under frame end including jack, Seats in the driver's cab: Driver's seat comfort, Fuel gauge for auxiliary heater, Separating relay with additional battery, Rear door step, Interior paneling in the cargo/passenger compartment: Hardboard, Fleece battery 95 Ah, Auxiliary heater (air) with timer Additional equipment: 3rd brake light, Adaptive brake light, Airbag driver side, Indicator for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Braking system with ABS+ASR, Headliner in the driver's cab, Glove compartment lockable, Body/structure: High-roof standard van, Wing doors at the rear raised and high roof, Child safety lock, Fuel tank: Main tank 75 liters, Cargo area partition, Load securing/lashing points, Headlight range adjustment, Model refinement, Engine 2.1 liters - 84 kW CDI CAT, Wheelbase 3665 mm, Low emission according to emission standard Euro 6, Sliding door cargo/passenger compartment right, Safety belt system with warning system

Condition: used, mileage: 183,000 km, power: 84 kW (114.21 HP), first registration: 05/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,926 mm, total width: 1,993 mm, total height: 2,612 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, For sale is a well-maintained Mercedes-Benz Sprinter 311 panel van, L2-H2, equipped with the globally popular 2.1-liter diesel engine. * The vehicle is in good condition! * German vehicle * Euro 6 emission standard * First owner * Complete service history * N1 truck registration Equipment: * Panel van L2-H2 * Air conditioning * Auxiliary heater Gbedez Achmopfx Ak Uot * Navigation system * Passenger airbag * Front and rear parking sensors * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * And more... Technical data: Permissible total weight: 3500 KG * Unladen weight: 2180 KG * Payload: 1320 KG * Trailer load: 2000 KG Why we are the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transfer license plates (5-day/customs registration) usually available on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. Two-stage polishing on the exterior * If necessary, paint correction and Smart Repair All of our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters, and other services you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have sparked your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on: Special equipment: 1 DIN slot in front under the headliner, airbag for passenger side, audio system Audio 15 (radio with color display), outside temperature indicator, additional battery (reinforced), window for rear doors, window for rear doors in black glass, heated rear window, window in the cargo/passenger compartment: - sliding, front left, window in the cargo/passenger compartment: - sliding, front right, generator 180 A, rear door (opening angle 270 degrees), wooden floor in the cargo area, steering wheel (steering column mechanically adjustable), navigation system Becker MAP Pilot, parameterizable special module, Parktronic system (PTS), spare wheel in driving condition, spare wheel holder under the end of the frame including jack, seats in the driver's cab: driver's seat comfort, fuel sender for auxiliary heater, separation relay for additional battery, step for rear door, lining in the cargo/passenger compartment: hard fiber, fleece battery 95 Ah, auxiliary heater (air) with timer Additional equipment: 3rd brake light, adaptive brake light, airbag for driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, braking system with ABS+ASR, roof lining in the driver's cab, lockable glove compartment, body/structure: high-roof standard panel van, hinged rear doors increased and high roof, child safety lock, fuel tank: main tank 75 liters, cargo compartment bulkhead, lashing points/tie-down rings, headlight range adjustment, model revision, engine 2.1 liters - 84 kW CDI CAT, wheelbase 3665 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, safety belt system with warning device

Condition: used, Used stainless steel tank / transport container / IBC Previous use: Chemicals Article number: 10888 Gsdjx Tta Ropfx Ak Usbt Capacity: 1,300 liters Design: Vertical in galvanized stacking frame Material (product contact): 1.4301 / AISI 304 Manway: 400 mm Construction: Single-walled Operating pressure as per nameplate: +0.10 bar Tank dimensions: Total width: 1,040 mm Total length: 1,240 mm Total height: 1,850 mm Foot height: 165 mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Features: Nameplate: yes Outlet diameter: 250 mm Discharge valve: Butterfly valve Distance from outlet to floor: 180 mm Empty weight: 266 kg

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Gbsdpsuzpiisfx Ak Ujt

Condition: used, Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Technical data: Gbedpfozrywqox Ak Ust - Motor: 2 kW - Connection: 380 V

Condition: used, functionality: fully functional, On offer: Miter saw, OMS FC 300 R Super – 1700 W, 230 V, with dust extraction The machine is used, has undergone technical inspection, is in full working order, and is ready for operation. Before purchase, it can be started and thoroughly inspected at our company's premises. The machine's greatest advantage is its complete, compact design with an original OMS B 91 A base and integrated dust extraction system. 230 V power supply, angle adjustment from -45° to +45°, motor brake, and a mechanism assisting the saw head's return ensure convenient and repeatable operation. Specifications: • Manufacturer: OMS • Model: FC 300 R Super • Year of manufacture: 1998 • Power supply: 230 V, 50 Hz • Saw motor power: 1700 W • Blade diameter: 300 mm • Blade speed: 3000 rpm • Maximum dimensions of the workpiece at a 90° angle: 85 × 130 mm (height × width) • Angle adjustment: from -45° to +45° • Scale for setting the cutting angle Godpjzqa Srjfx Ak Usbt • Motor brake • Blade guard • Mechanism assisting the cutting unit's return • Two-piece aluminum fence • Base with integrated dust extraction: OMS B 91 A • Dust extraction motor power: 495 W • Dust extraction power supply: 230 V, 50 Hz • Filter bag located inside the base • CE marking • Overall dimensions without extension tables: 85 × 81 × 160 cm (length × width × height) Application: • Cross-cutting solid wood elements • Trimming boards, timbers, moldings, and profiles to length • Making straight and miter cuts • Preparing components for the production of frames, moldings, furniture, and carpentry • Preparing material for further processing Additional information: • The photos show the actual condition of the offered machine • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; in the case of domestic sales, 23% VAT must be added Financing and transport: • We arrange transport with our own MDD fleet or through external carriers • We help in obtaining a lease or lease financing • The delivery cost depends on the destination and the method of transporting the machine MDD wood machines is a company specializing in the sale and service of used woodworking machines. We offer professional advice, technical inspections, repairs, and machine preparation for operation. We support customers both before and during the subsequent operation of the equipment. We regularly update our offer. If you are looking for a machine that we do not currently have, we can help you find and source it. We offer machines from manufacturers such as: SCM, SAC, Martin, Hofmann, Casadei, Kuper, Osama, Altendorf, Casolin, Sicar, Omga, Maggi Junior, Brandt, Felder, Weinig, Olimpia, Impianti, Italpresse, Orma, Manni, Kolmag, Centauro, Meber, Ogam, Cosmec, Unilev, Volpato, Safo, Atlas Copco, Samco, Fini, ABAC, Stema, Stromab, Omec, Bottene, Prodeco, and many others. Contact us for more information, to schedule a machine demonstration, and to find out the transport costs. MDD wood machines – sales and service of machines for the woodworking industry.

Condition: good (used), Beer / Brewery Production Equipment 9 qty insulated tanks, approx 1000 lts capacity each 2 qty large tanks, approx 1500 lts capacity each All associated pumps, chiller pump units, wash station. 2 qty tanks with lids, approx 1000 lts each 2 qty large tanks with lids, approx 1500 lts each Gbsdpfx Akoyg R Azs Uot All associated pumps, water filteration system 2 qty timber clad tanks, approx 1000 lts and 1500 ltd capacity each 2 qty insulated tanks, approx 1000 lts capacity each All associated equipment, heat exchanger, pumps,

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Gbodpfsyl It Isx Ak Ujt Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: used, Year of construction: 1995, Used Filling Triblock GAI 12.1.16.1. 16 Valves 2500 Bph Rinsing machine with 12 grippers, applying a single treatment of air blown on the bottle mouth before straightening. Carousel grippers manually variable in height 1. 1-head station for vacuum and gas injection before the filling machine with variable head in height 2. Filling machine 16 light vacuum taps in bell Filling bell manually variable in height Mechanical spring bottle lifting pistons 1. capper 1 head straight cork Leveler before closing with gas injection In the used triblock there is the vacuum system before closing the bottle Head manually variable in height All frame made of stainless steel Gbjdpfx Ajvguz Dsk Uet Fairing of stainless steel Safeguards on the whole perimeter Bottle from left side Year 1995 marked CE Production approximately 2.500 bph with the 0.75 Ml

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Gbedpfozumrmsx Ak Uet Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Year of construction: 2005, condition: good (used), machine/vehicle number: 815 1015 1794, Manufacturer: CFS Germany GmbH Type: JuniorPak M420 Year of manufacture: 2005 Voltage: 400 V Phases: 3-phase + N + PE Current: 29 A Power: 20 kW Frequency: 50 Hz Weight: 2200 kg This is a thermoforming machine (deep-draw machine) for the production of vacuum-packed or MAP-packed food. It is designed for medium-sized production lines and is often used for meat, cold cuts, cheese, fish, and ready meals. How the JuniorPak M420 works 1. Bottom film feeding A roll of plastic film is mounted at the rear of the machine. The film is drawn forward using conveyor chains with grippers. Common materials: APET/PE PA/PE PP PET barrier film 2. Heating The bottom film enters the heating zone. Here, the plastic is heated to approximately: 90–140 °C, depending on the material type. The temperature is controlled by electric heating plates. 3. Deep drawing This is the machine's most important process. The mold closes. Then, usually: vacuum is applied under the film compressed air is applied above the film, if required the film is drawn down into the mold The result is finished plastic containers or trays. The forming depth is determined by the mold. 4. Filling zone After forming, the process stops. Operators or automatic equipment place the product in the trays. Examples: meat burgers bacon cheese fish 5. Top film A new film is fed in from above. This lies over the product. 6. Vacuum/MAP The sealing chamber closes. The machine can: create a vacuum flush with gas seal directly In MAP, the following are often used: CO₂ N₂ O₂ The gas mixture depends on the product. 7. Sealing The top film is sealed to the bottom film. Sealing occurs with: temperature Gbsdpfx Akszka Ruj Ust pressure time These three parameters are crucial for a tight seal. 8. Cutting The cutting tool cuts each individual package. Excess film is transported out as scrap. 9. Ejection Finished packages are transported out onto a conveyor belt. They can then: be labeled be weighed be checked with a metal detector be packed in boxes A JuniorPak M420 normally consists of: Frame made of stainless steel Film transport with chains Heating station Forming station Filling zone Vacuum/MAP chamber Sealing tool Cutting tool Ejection conveyor Vacuum pump Pneumatic system Hydraulics (on some models) PLC control with HMI Typical technical data For the M420 series, typical values are: Maximum film width: approx. 420 mm Forming depth: up to approx. 100–120 mm, depending on the tool Cycle time: 5–15 cycles/min Capacity: from a few hundred to several thousand packages/hour, depending on the product and tool Connection: 400 V 3-phase Power: 20 kW (as shown on the nameplate)

Condition: excellent (used), functionality: fully functional, SPX APV & ALFA LAVAL | Industrial CIP Valve Manifold (Hybrid Process Valve Block on a Frame) Manufacturers: SPX FLOW / APV and ALFA LAVAL Model / System Type: DELTA / UNIQUE MIXPROOF (Integrated single- and double-seat valve block) Control Heads: SPX APV (CU4 series model, including CU41N S AS-i) Control Heads and Actuators: ALFA LAVAL Gbodjy Ufglspfx Ak Uet Main Component Identifier: Olympia BE-0112005 / DS53XVE03 Configuration Factory Code: 13085-089614-E Power and Communication: Industrial AS-Interface network bus, pneumatic actuator power supply Construction Material: AISI 316L / 1.4404 grade stainless steel Supporting Structure: Factory-made stainless steel support frame with adjustable leveling feet This professional, hybrid valve manifold, based on components from SPX APV and Alfa Laval, represents a top-class industrial distribution hub. This device is the absolute core of liquid flow management systems, automatic process distributors, and advanced CIP (Cleaning In Place) stations. This type of valve block is a key pillar of infrastructure in large and medium-sized dairy plants, breweries, fruit and vegetable processing plants (juice, beverage, and concentrate production), as well as in the production of liquid ready meals, sauces, and in the chemical and food industry. The use of Mixproof technology (double-seat valves) from Alfa Laval, combined with SPX APV CU4 digital control, solves one of the biggest problems in liquid logistics: it allows the simultaneous flow of two completely different media (e.g., a finished food product and an aggressive cleaning agent, such as lye or acid) through a single valve block, without any risk of cross-contamination. When switching, special drain chambers immediately remove any remaining residue, providing a 100% guarantee of microbiological cleanliness. Thanks to AS-Interface communication, the manifold transmits real-time feedback signals about the exact position of each valve seat directly to the main PLC controller (e.g., Siemens S7). This prevents operator errors, reduces technological downtime, and allows for the simultaneous cleaning of one section of the pipeline while continuous production continues on the other. The compact mounting of the entire unit on a sturdy, stainless steel frame (so-called skid construction) dramatically reduces installation costs in a new or modernized plant. Key features and advantages: - Hybrid of best technologies (SPX APV + Alfa Laval): Combines the mechanical reliability and sealing of Alfa Laval stainless steel with the advanced control and monitoring electronics of the APV DELTA CU4 series. - Quick installation and space saving: A complete, compact valve block mounted on a stable mounting frame – delivered as a plug-and-play unit, minimizing the time required for line modernization.