Used Kahl Pellet Press for sale (12,518)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Nodpfx Afox A U Ncsaowf The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: ready for operation (used), functionality: fully functional, -----Konica Minolta Press C 1060 with 1.3 million prints----- Tested and ready to operate! Equipment: - fiery ic308 + faci bundle - RU 509 - PF 707 VACUUM PAPER FEEDER OPTION - DF - FS 532 - Video of the machine in operation available upon request Nwodpowx Ey Tsfx Afaof As an experienced reseller of used copiers, we have developed real expertise in packaging and pallet shipping, ensuring that our customers receive machines in perfect condition. We ship copiers sourced from and serviced by Konica Minolta France. If you have any questions, please don't hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and arranges worldwide deliveries upon request. Feel free to contact us for further information.

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool Nwsdpfxsd S D Dns Afajf -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm -Weight: 22 kg

Condition: good (used), Karl Krause Large Bookbinding Press with Tapping Block The machine is fully operational and ready for operation. Nwedpfey Hglyox Afaef Manufactured by Karl Krause, Germany. The press has a tapping block that increases the pressing force. Pressure: 5 tons Plate dimensions: 550 x 490 mm

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Njdjvviytepfx Afaowf

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Nsdpfxjvvkmbj Afajwf Storage location: Nattheim

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Storage location: Nattheim Nwedevvkl Djpfx Afajf

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C Nwedoiwfp Tjpfx Afaof - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: new, Year of construction: 2023, Immediately available, highly upgraded CNC press brake YAWEI PBH220/4100-7C - Pressing force: 2200KN - max. bending length: 4100mm - Year of construction 2023 Njdpfx Aeqgcq Hjfajwf - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - 7 CNC controlled axes - Y1/Y2, X, R, Z1 + Z2, X1 (Delta X) - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 3,100 mm, distance between stands: 2,600 mm, warranty duration: 24 months, control type: CNC control, degree of automation: automatic, number of support arms: 2, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, safety light barrier, Immediately available, highly upgraded CNC press brake YAWEI PBH160/3100-4C Nwodpfx Ajyvzhnofajf - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2024 - CNC controlled hydraulic crowning - DELEM DA66S - 4 CNC controlled axes - Y1/Y2, X, R - Mechanical quick clamping upper tools type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 month guarantee - Commissioning, training

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 70300 € 1328.67 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 Nwodpfxswiqq Se Afaof bolster plate € 2.580,00

Condition: excellent (used), Year of construction: 2016, operating hours: 12,730 h, pressing force: 170 t, stroke length: 445 mm, throat depth: 420 mm, overall weight: 12,500 kg, Hydraulic Press Brake Manufacturer: TRUMPF Model: TruBend 5170 Excellent condition, year of manufacture 2016 Technical Specifications Nodpfx Asy Hbxnjfaewf - Manufacturer: TRUMPF - Model: TruBend 5170 - Year of manufacture: 2016 - Usable bending length: 3230 mm - Pressing force: 170 t - Weight: 12,200 kg - Connected load: 28 KVA - Free clearance between frames: 2690 mm - Throat depth: 420 mm - Table width: 180 mm - Installation height: 615 mm - Stroke: 445 mm - Upper tool height: 110–390 mm - Closing speed of ram: 220 mm/s - Dimensions (LxWxH): 4250 x 2050 x 3000 mm Equipment: - Controller: TRUMPF TASC 6000, 15" TFT screen - Interfaces: parallel, RS 232, USB, Ethernet - 2 movable support arms - 1 CNC-controlled bending aid incl. parking position on the right - Rear safety enclosure, electrically closable - CNC-controlled crowning - Pneumatic die shifting - Hydraulic tool clamping top and bottom incl. LED lighting at the front - Controlled axes: Y1, Y2, X, X1 R, Z1, Z2 - BendGuard light barrier (for 220 mm/s) - Documentation - 2 upper tool sets (straight & gooseneck) - 5 lower tool sets All specifications are without guarantee. The machine is currently still located at the seller's facility in the Stuttgart area and can be inspected under power by appointment. The company is a very small business that is now closing due to retirement. The main photo has been altered with AI assistance. Complete original images are available upon request.

Condition: good (used), Offer consisting of: SM102-2P, year of manufacture 2000, CP2000 remote ink control, impression count: 200 million, new rollers, Technotrans, Autoplate, chrome cylinder, Nsdpey Hbp Tefx Afaswf

Condition: used, Year: 2013. Maximum speed: 17,200 sheets per hour. Maximum sheet size: 720×1030 mm. PQC-S printing quality control console. KHS-AI intelligent preset system. Fully automatic plate change system (FAPC). PDC-SX spectral colour and register measurement system. Fully automatic cleaning for blankets, impression cylinders and ink rollers. AMR automatic paper size presetting function. All manuals, electrical drawings, parts and accessories complete the equipment. เครื่องพิมพ์ออฟเซ็ตแบบแผ่น (Sheetfed) KOMORI Lithrone G540 แบบ 5 สี (มือสอง) ปี: 2013 ความเร็วสูงสุด: 17,200 แผ่นต่อชั่วโมง ขนาดกระดาษสูงสุด: 720 × 1030 มม. ระบบและอุปกรณ์หลัก: ระบบควบคุมคุณภาพงานพิมพ์ PQC-S Console ระบบตั้งค่าล่วงหน้าอัจฉริยะ KHS-AI ระบบเปลี่ยนเพลทอัตโนมัติเต็มรูปแบบ FAPC ระบบวัดสีและทะเบียนพิมพ์แบบสเปกโตรมิเตอร์ PDC-SX ระบบล้างผ้ายาง ลูกกลิ้งกดพิมพ์ และลูกกลิ้งหมึกอัตโนมัติ ระบบตั้งค่าขนาดกระดาษอัตโนมัติ AMR เอกสารและอุปกรณ์: คู่มือทั้งหมด แบบแปลนไฟฟ้า อะไหล่และอุปกรณ์ครบ เครื่องพร้อมใช้งานทันที Njdpoy Hgt Refx Afaowf

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 The space-saving, tiltable vacuum press with a pressing area of 3,500 mm x 1,420 mm. Technical standard equipment of the vacuum press: Nwjdpfx Afsywpt Ijaof Unless otherwise agreed, the vacuum press will be powder-coated in RAL 7012 and RAL 7035 finishes. Special colors are possible upon request but must be discussed beforehand and may incur additional costs. Welded table construction for professional use, mounted on a tiltable transport cart, equipped with 4 swivel castors, surface load capacity of 150 kg. When not in use, the machine can be tilted to save space and locked in place, reducing its depth to 800 mm. The tabletop consists of a 22 mm thick laminate MDF board, covered in the pressing area by a slotted vacuum distribution plate made of MDF. Membrane frame opening is supported by 2 gas pressure springs mounted on the sides of the machine. Equipped with a natural rubber membrane, 2 mm thick, with 780% elasticity and temperature resistance up to 70°C, fastened using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is achieved via a sealing profile in the membrane frame. Oil-lubricated rotary vane vacuum pump with a suction capacity of 40 m³/h and two vacuum tanks, providing a total capacity of 200 liters. The evacuation and venting of the pressing chamber is carried out via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. Additionally, you may opt for initial setup and a brief instruction session by one of our staff members. Should you wish to take advantage of this service, we will be happy to provide an additional quote. Summary of key features: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elasticity: 780%, very high recovery properties, suitable for temperatures up to 70°C - MDF vacuum distribution plate - Digital vacuum control VAK-CONTROL 1 with auto shut-off - Vacuum pump: 40 m³/h oil-lubricated - Maximum negative pressure: -0.99 bar - Maximum pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with locking mechanism - Additional 13 mm vacuum connection - Pressing area: 3,500 x 1,420 mm - Table height to vacuum distribution plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1,030 mm - Installation dimensions (ready for operation): 3,790 x 1,700 x 2,150 mm (LxWxH) - Installation dimensions (tilted): 3,790 x 800 x 1,750 mm (LxWxH) Customs tariff number: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: short-term Location: Flörsheim

Year of construction: 2003, condition: ready for operation (used), - USED - 7-AXIS SYNCHRONIZED CNC PRESS BRAKE    AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3150 mm TONNAGE: 70 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2640 mm OPEN HEIGHT: 450 mm APPROACH SPEED: 160 mm/sec Njdpfx Afork Shcoaswf RETURN SPEED: 160 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 15 kW CONTROL UNIT: ESA KVARA WEIGHT: 7800 Kg OVERALL DIMENSIONS: 3400 x 2100 x 2650 mm

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec Nwodpfxork Sg Ro Afasf WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm Nwedsxn U Rqepfx Afaef DISTANCE BETWEEN UPRIGHTS: 1700 mm UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Year of construction: 2000, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 3130 mm TONNAGE: 80 ton Njdpfxsmyc I No Afaowf THROAT DEPTH: 405 mm DISTANCE BETWEEN UPRIGHTS: 2700 mm OPEN HEIGHT: 350 mm UPPER BEAM TRAVEL: 150 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 96 mm/sec WORKING SPEED: 9 mm/sec MOTOR POWER: 5,5 kW CONTROL UNIT: TASK 84 SIRIO 2 WEIGHT: 6500 Kg OVERALL DIMENSIONS: 4000 x 1700 x 2400 mm

Year of construction: 2010, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3200 mm TONNAGE: 100 ton THROAT DEPTH: 500 mm DISTANCE BETWEEN UPRIGHTS: 2550 mm OPEN HEIGHT: 600 mm UPPER BEAM TRAVEL: 400 mm X-AXIS TRAVEL: 800 mm R-AXIS TRAVEL: 150 mm APPROACH SPEED: 200 mm/sec RETURN SPEED: 180 mm/sec WORKING SPEED: 10 mm/sec Njdpfjtq Ngbsx Afajwf MOTOR POWER: 11 kW CONTROL UNIT: ESA 875 PLUS WEIGHT: 10500 Kg OVERALL DIMENSIONS: 4300 x 2000 x 3100 mm NOTE: MACHINE EQUIPPED WITH NEW CNC ESA

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 7 A, pressing force: 150 t, stroke length: 300 mm, Equipment: CE marking, documentation/manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND RAPID ADVANCE Njdpoy E Rr Ijfx Afaswf CAPACITY: 150 TONS The monolithic frame is entirely laser-cut and securely bolted in package form. This characteristic makes all our presses deformation-resistant, even in areas subject to the highest stress. All components are manufactured in Italy. Hydraulic power unit with ICME submerged motor 400 V, 50/60 Hz; cylinders and frames made in Italy. GALTECH monobloc distributor. No. 2 single-direction external gear pumps in aluminium by VIVOIL: one dedicated to fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel to set the required force. Maximum pressure valve with mechanical lock to prevent overpressure. 2 MP CETOP high-range modular block. Standard pressure gauge for displaying delivered power. INTECH electrical control panel, certified to current standards and independently CE marked. Maximum capacity: 150 tons Rapid approach speed: 1,450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shaft diameter: M30 Tank capacity: 50 L Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1,300 kg

Condition: used, Year of construction: 2000, table width: 2,700 mm, table length: 3,300 mm, total length: 3,800 mm, total width: 1,000 mm, total height: 2,700 mm, overall weight: 1,500 kg, No. 3272 Perforated plate press Hess JULIA Used, year of construction 2000 Dimensions of the perforated plate 3300 x 2700 mm LW Nwsdoy E N Izopfx Afaof 4 manual hydraulic cylinders (2 in need of repair) 12 pneumatic cylinders (2 magnetic and with angle adjustment) Transport dimensions approx. 3800 x 1000 x 2700 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Nwodpfjy E N Aljx Afajf Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm Njdpfx Asy E Nzhefaswf piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Nedoy E Nzbopfx Afaowf Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s