Used Jaroma Dsva-40 for sale (22,030)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Kdsdpfx Ahszlkgcjbsu Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: new, Year of construction: 2026, functionality: fully functional, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES Kdjdpfx Ahszkubzobju • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth • Precise material guidance • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1550 × 510 × 1180 mm • Weight: 341 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 22900 € Kdodoynndxepfx Ahbeu 439.68 € 40 to 500 mm 700x500 mm 600 mm 26 mm/s 9 mm/s 4 kW 1400 mm 900 mm 2200 mm 1300 kg 2 speeds adjustable max. pressure manomete

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10800 € 207.36 € 35 mm 137 mm 137 mm 3 1.1 kW 7 m/min 35x8 mm / 300 mm 50x12 mm / 400 mm 18x18 mm / 250 mm Ø 22 mm / 200 mm Ø 40x1,5 mm / 500 mm 30x15x2,5 mm / 500 mm 25x25x2 mm / 450 mm 35x35x5 mm / 400 mm 30x30x4 mm / 550 mm 1050 mm 500 mm 1250 mm 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts Kdsdpfx Aeynnhkjhbeu lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 20,000 rpm, Fanuc control system Kdedoy Ndlpspfx Ahbeu 2 tables, 1100 x 600 mm 40-tool changer BT40 spindle Maximum spindle speed: 20,000 rpm 2 chip conveyors

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Kodpey H I Ngofx Ahbjdu Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2021, load capacity: 4,000 kg, lifting height: 4,000 mm, total length: 4,000 mm, - Geschwindigkeit mit/ohne Last 24 km/h - Kabinendach aus Kunststoff, Heizung - Ventile 3 - Nenntragfähigkeit/Nennlast 5000 kg - Lastschwerpunktabstand 500 mm - Lastabstand 567 mm - Achslast beladen kg 10780/1360 - Achslast unbeladen kg 3300/4060 - Spurweite mm 1180 - Spurweite mm 1190 - Neigung Mast/Gabelträger α/β ° 6/12 - Sitzhöhe bezogen auf SIP/Ständerhöhe mm 1315 - Kupplungshöhe mm 380 - Gangbreite für Paletten 1000 x 1200 quer Ast mm 4597 - Gangbreite für Paletten 800 x 1200 längs Ast mm 4797 - Wenderadius mm 2830 - Kleinster Drehpunktabstand mm 900 - Fahrgeschwindigkeit beladen/unbeladen Km/h 22/24 - Hubgeschwindigkeit beladen/unbeladen m/s 0.45/0.49 - Senkgeschwindigkeit beladen/unbeladen m/s 0.38/0.26 - Zugkraft beladen/unbeladen kN 28/21 Kdsdpfx Ahjy E Uapobju - Steigfähigkeit beladen/unbeladen % 20/20 - Betriebsbremse Mechanisch/Hydraulisch - Nenndrehzahl l/min 2200 - Zylinderzahl 4 - Kapazität cm3 2482 - Emissionsgrad gem. gemäß EU-Verordnung 2016/1628 Stage III a - Bordnetzspannung V 12 - Art der Antriebseinheit Drehmomentwandler - Betriebsdruck für Anbaugeräte bar 200 - Ölmenge für Anbaugeräte L/min 101 - Kraftstofftank, Inhalt 90 - Anhängekupplung Typ DIN 15170 Bolzen

Condition: excellent (used), Tul-Kelch tool rack SK 40 Kdodpfx Asy I T S Nshbju Tool holder SK 40 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm Kedpszf Nn Ssfx Ahbedu max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head

Condition: good (used), functionality: fully functional, Speed adjustable in a continuous range from 60 to 1600 rpm, threading function, feed mechanism, swivel table. Kdjdpfx Ahez Rmnrsbou

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 11,283 h, load capacity: 4,000 kg, lifting height: 3,750 mm, fuel type: gas, mast type: simplex, construction height: 2,650 mm, fork carriage width: 1,150 mm, fork length: 2,400 mm, empty load weight: 5,685 kg, total length: 3,050 mm, drive type: Treibgas, construction width: 1,450 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 250-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 20 - 40% Battery year of manufacture: 2015 Double auxiliary hydraulics, side shift, load guard, half-cabin, gas tank, PVC side paneling left/right, 2 work lights front, 1 work light rear. Kodpfsz H Eydsx Ahbsdu

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 10,710 h, load capacity: 4,000 kg, lifting height: 3,750 mm, fuel type: gas, mast type: simplex, construction height: 2,660 mm, fork carriage width: 2,400 mm, fork length: 1,150 mm, empty load weight: 5,685 kg, total length: 3,050 mm, drive type: Treibgas, construction width: 1,450 mm, Internal combustion forklift Load center: 500 ISO class: FEM 3 A Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2x 250-15 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2x 250-15 Kdjdoz H Eyqopfx Ahbeu Rear tire condition: 20 - 40% Battery year of manufacture: 2015 Additional single hydraulic circuit, side shifter, half-cab with heater, load guard, gas tank, 2 front work lights, 1 rear work light.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 11,481 h, load capacity: 4,000 kg, lifting height: 7,139 mm, free lift: 2,350 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork carriage width: 1,430 mm, fork length: 1,400 mm, empty load weight: 7,380 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,250 mm, opening width: 1,500 mm, Side loader Load center: 700 ISO class: 3B Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 27x10-12 Rear tire condition: 40 - 60% Kjdpfx Aoz Ifqrehbsdu Battery year of manufacture: 2009 Cabin, heater, full free lift, lighting according to StVZO (German Road Traffic Act)

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,684 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: gas, mast type: triplex, construction height: 2,690 mm, fork carriage width: 1,440 mm, fork length: 1,400 mm, empty load weight: 7,380 kg, total length: 4,600 mm, drive type: Treibgas, construction width: 2,200 mm, opening width: 1,500 mm, Side loader Load center: 700 Fork width: 150 mm Fork thickness: 50 mm ISO class: integrated Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 27x10R12 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 2 x 27x10R12 Rear tire condition: 40 - 60% Battery year of manufacture: 2011 Kodpjz If Dljfx Ahbjdu Additional single hydraulic circuit, integrated side shifter, cabin, heater, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 front work lights, 1 rear work light.

Condition: used, axle configuration: 3 axles, first registration: 10/2026, color: other, Year of construction: 2018, Empty weight: 4.850 kg Axle 1: left 12 mm right 12 mm Axle 2: left 10 mm right 10 mm Axle 3: left 9 mm right 9mm Kdodpfxsz R Eizj Ahbeu We have the possibility to stack trailers!

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Controlled axes: 4 + Flex5 Kjdpfjz Ekfvsx Ahbedu Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: good (used), axle configuration: 3 axles, first registration: 12/2016, suspension: air, tire size: 385/55R22,5, wheelbase: 9,090 mm, color: other, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift - Central lubrication system = Notes = Number of axles: 3, Payload: 32150 kg, Tare weight: 9850 kg, Gross vehicle weight: 42000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Central lubrication system, Suspension type: Full air, ABS, EBS, Refrigeration unit model: Vector 1950 city, Refrigeration unit: Diesel/electric, Unit operating hours / electric: 1, Unit operating hours / Diesel: 6121, Body insulation, Type of cooling: Cooling, Additional evaporator, Axle type: SCHMITZ, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 3000 kg, Tail lift manufacturer: Zepro, Tail lift material: Steel, Tail lift size: 200 x 254, Battery for ramp, STEERAXLE // TAILLIFT // LIFT AXLE // CARRIER VECTOR 1950 CITY = Additional information = General information Cab: Day cab Registration number: OP-33-KY Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 385/55R22,5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 9 mm Axle 3: Steerable; Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Weights Unladen weight: 9,850 kg Payload: 32,150 kg GVW: 42,000 kg Functional Tail lift: Zepro, Rear door, 3000 kg Refrigeration unit: Diesel and electric (6121 operating hours diesel; 1 electric) Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none = Company information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services Kedpfx Aozg T Tnohbodu • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly about our European warranty package.

Condition: used, HUBER Circulating chiller / Thermostat / Process chiller Huber UC055Tw special model Water-cooled circulating chiller for industrial temperature control and cooling applications For sale is a used, water-cooled circulating chiller from Peter Huber Kältemaschinenbau GmbH. This unit is suitable for cooling and temperature control of machines, industrial plants, process circuits, production facilities, and for general industrial cooling applications. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: UC055Tw special model Equipment type: Water-cooled circulating chiller / Thermostat Temperature range: -10 to +40 °C Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 168 kg Refrigerant: R507 Refrigerant quantity: 1.07 kg CFC and HCFC-free Power connection: 400 V / 3~ N / 50 Hz Max. power consumption: 7 A Max. pressure: 25 bar Refrigeration unit: Water-cooled Temperature range: -10 to +40 °C Equipment: Huber Compatible Control system Digital temperature display Water-cooled refrigeration unit Circulation pump Connections for external temperature control circuit Cooling water connections Drain Residual drain Interfaces Main switch Stainless steel housing Transport rollers Lifting eyes Accessories as shown in the pictures Application areas: Process cooling Machine cooling Industrial plants Production facilities Temperature control of external circuits Cooling water supply Laboratory and process engineering Scope of delivery: 1 × Huber UC055Tw special model circulating chiller Ksdpfxezui Uwo Ahbsdu Connection / cooling water hoses as shown in the pictures Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Kjdpfxovphzij Ahbjdu Equipment: 40 nozzles for consistent adhesive application

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: Kdedjzl E N Eopfx Ahbeu 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 6,151 h, load capacity: 4,000 kg, lifting height: 4,295 mm, fuel type: gas, mast type: simplex, construction height: 2,730 mm, fork length: 2,000 mm, drive type: Treibgas, LPG forklift Mast type: Standard Transmission: Torque converter Ksdsxrhkrjpfx Ahbedu Condition: Ready for use and fully functional Technical condition: normal Sideshift, 3rd valve,

Condition: used, Year of construction: 2012, Transnorm curved belt conveyor right 40°-780-600 RA1848 Make: Transnorm Running direction: 40° right running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 780 mm Inner radius (IR): 600 mm V230/400 kw 0,37 Height frame: 280 Scope of delivery:with motor, without supports (please enquire if required) Optionally available: Supports Side guide one and both sides Ksdsk Abg Sspfx Ahbjdu frequency inverter For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2015, condition: good (used), machine/vehicle number: 3017, ELME 20"- 40" from Uniktruck Kedpfoyuh Epjx Ahbedu

Condition: good (used), machine/vehicle number: 2844, Year of construction: 2013, load capacity: 36,000 kg, total length: 10,000 mm, total width: 4,200 mm, operation weight: 14,000 kg, Kalmar FC50 20-40” from Uniktruck Wheel type – Steering wheel: Pneumatic Wheel size – Steering wheel: 18.00-25 Kedjyuhwxopfx Ahbedu

Condition: new, Year of construction: 2026, ✅ You always get dealer prices from us! ✅ Kdsdpjrgp Swjfx Ahbeu NEW / One Way sea containers For sale are NEW sea containers / YEAR OF CONSTRUCTION 2024 One Way / One sea voyage old Incl. a lock box - security system to protect valuable goods in the container from unauthorized access RAL 5010 gentian blue RAL 5013 cobalt blue RAL 7015 slate gray RAL 7016 anthracite RAL 7035 light gray RAL 7042 traffic gray RAL 7030 stone gray RAL 3009 oxide red RAL 9010 pure white RAL 9005 jet black - Wooden floor - Delivery and unloading possible for an extra charge EXTRASERVICES - completely personal and individual for you! On request... - we will be happy to make you a customized offer - we deliver containers quickly and easily nationwide and even worldwide - we professionally convert containers for you Miscellaneous: - External dimensions (LxWxH): 12,192 x 2,438 x 2,896 mm - Internal dimensions (LxWxH): 12,032 x 2,352 x 2,698 mm - Door opening (WxH): 2,340 x 2,585 mm - Volume: 76m³ - Tare weight: 3,660 kg - Payload: up to max. 26,820kg PLEASE CONTACT US