Used Jaroma Dsva-40 for sale (21,997)

Condition: excellent (used), Catalog number: 8053 Isdpfx Aoztzknehyjih TECHNICAL DATA - Shaft width: 410mm - Noise-reducing comb - Number of knives: 4 pcs - Bed length: 2000mm - Cast iron beds - Both beds are adjustable - Original adjustable guide rail with angle adjustment - Motor: 4kW - Dimensions (L/W/H): 2000x900x1300mm - Weight: 610kg ADVANTAGES – Made in Poland – Upper control panel – 4-knife shaft – Used thickness planer – Very good condition Net price: 6900 PLN Net price: 1605 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Double-sided planer Jaroma, two-sided thicknesser DSRA - 40 Isdpfoy Nlp Aox Ahysih Planing width: 40 cm 1 x bottom planing shaft with 4 knives, 5.5 kW (surface planer) 1 x top planing shaft with 4 knives, 5.5 kW (thicknesser) 7 upper feed rollers Maximum planing height: 170 mm Minimum workpiece length: 350 mm Power requirement: 15 kW Feed: 2 speeds Machine tested, ready for operation, in very good condition.

Condition: excellent (used), Catalog number 7835 TECHNICAL DATA - Shaft width 410mm - Silencer comb - Number of knives 4 pcs - Bed length 2500mm - Cast iron beds - Both beds are adjustable - Original adjustable guide with angle adjustment - Motor 4kW - Electric brake - Diameter of dust extraction nozzle 125mm - Dimensions L/W/H 2500x820x1210mm - Weight 910kg ADVANTAGES – Polish production – Upper control panel – 4-knife shaft Isdpfx Aoztzkbshysih – Used thicknesser – Very good condition Net price: 15900 PLN Net price: 3700 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Iisdpfx Aoz Tdcfjhyoh

Year of construction: 1978, condition: reconditioned (used), Thicknesser Jaroma DSMB 63 7.5 W lignum production Poland Jaroma - Technical Documentation TECHNICAL PARAMETERS: shaft width: 630 mm detail thickness: 240 mm 4 shaft knives: knife shaft diameter: 125 mm number of rotations of the knife shaft: 6000 rpm adjustable rollers in the lower tabletop: motor: 7.5 kW Iijdpfxjiq Dk So Ahysh electric height adjustment: two types of feed speed: dimensions (length/width/height): 120/128/125 cm weight: 1060 kg

Condition: like new (used), Year of construction: 2014, machine/vehicle number: 618, functionality: fully functional, operating hours: 800 h, power: 80 kW (108.77 HP), input voltage: 400 V, input current: 250 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,200 °C, inner dimension length: 600 mm, inner dimension width: 400 mm, inner dimension height: 400 mm, total length: 4,900 mm, total width: 2,950 mm, total height: 2,900 mm, overall weight: 10,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, Condition: very good; the furnace has only been used for 100 batches. The delivery includes a loading electric cart and three charging baskets. Direct sale to end-users only. Iodpfozz A Rrex Ahysih W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Iiodsh S Uhfspfx Ahyoh Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: ready for operation (used), Year of construction: 1997, input voltage: 415 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, operating speed: 7 mm/s, reverse speed: 50 mm/s, table length: 4,000 mm, throat depth: 500 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,500 mm, overall weight: 11,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, CNC Megoform PB 40-130 Upstroke press brake. Serial Number 0622183 - 25/09/97 4000 mm (4 meters) working bed length. Tonnage / Capacity: 135-ton capacity Daylight (without tools) 340mm Side frame throat depth 500m Advance speed 37mm/s Working speed 7.5mm/s Return Speed 50mm/s Approx weight 11,000 Kgs Shipping dimensions L 4400mm , W 1800mm , H 2500mm Hurco auto bend 7 cnc controller Iedpfx Asz Tdbhjhyoih X & R axis auto set , Z axis manual set Light guard

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Producer JAROMA DCGA II machine model / type Year of production 2001 Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Iodpegyz Rkofx Ahyjih Cost of delivery Customer cover Startup type to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Type: TRD 40 CNR 6000 Table length: 6000 mm Table width: 600 mm Max. drilling diameter: 40 mm Flow drill option Cooling system Ijdjzz N T Tjpfx Ahyoih Year of manufacture: 2010

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Iodpfx Aez Sml Ishyjih Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: good (used), Year of construction: 1979, functionality: unexamined, pressing force: 40 t, overall weight: 5,000 kg, Equipment: safety light barrier, SHC 40 Hans Schoen Iisdpjz S E S Sefx Ahyjh

Condition: ready for operation (used), Year of construction: 1962, machine/vehicle number: E 557, functionality: fully functional, pressing force: 40 t, stroke length: 125 mm, table width: 400 mm, table length: 1,000 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Iijdoz Izdnepfx Ahyjh Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: excellent (used), CATALOGUE NUMBER 7573 Technical specifications: - shaft width 640mm - number of knives 4 pcs - max. thickness of workpiece 270mm - from above: - pawls - toothed infeed shaft, pull-type - pressure rollers - planing shaft - pressure rollers - smooth outfeed shaft, pull-type - from below: - adjustable rollers in the lower table, 2 pcs - motor 7.5kW - electric table lifting - lifting motor 0.75kW - 2 types of feed speed - feed motor 1.1kW - diameter of dust extraction port 160mm - dimensions L/W/H 1150x1240x1170mm - weight 1073kg Iiedpfx Ajztw I Njhysh ADVANTAGES - Polish production - electric table lifting - DTR documentation - used thicknesser, very good condition Net price: 26900 PLN Net price: 6256 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number 7303 TECHNICAL DATA - Shaft width 640mm - Number of knives 3 pcs - Max thickness of the workpiece 250mm From above: - Pawls - Toothed infeed shaft, pulling type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pulling type From below: - Adjustable rollers in the lower bed, 2 pcs - Motor 7.5kW - Electric bed lifting - Lifting motor 0.75kW - 4 feed speed types - Feed motor 1.5kW - Diameter of the dust extraction nozzle 140mm - Dimensions L/W/H 1120x1250x1680mm - Weight 1033kg - Made in Poland - Used thickness planer, very good condition Original photos Net price: 19900 PLN Net price: 4628 EUR, depending on the exchange rate of 4.30 EUR Iodpfx Ahszxg S Ueyeih (Prices may vary due to larger fluctuations)

Condition: used, Year of construction: 2006, operating hours: 6,526 h, functionality: fully functional, machine/vehicle number: SN0575, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: 16i, total height: 2,800 mm, total length: 4,800 mm, total width: 2,800 mm, table width: 400 mm, table length: 400 mm, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,526 h, spindle motor power: 18,500 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 210, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI precision machining center with very few spindle hours, as it was only put into operation in 2017. Iodjz R Rcbopfx Ahyeih Matrix magazine with 201 positions. High-pressure coolant system KNOLL 200/1400. Scraper conveyor chip removal system Knoll 450K-1/290. Fanuc 16iMA. Can be inspected while powered on.

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft Iodpjzu Sgpofx Ahyoih - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), Jaroma Thicknesser Max. planing width: 530mm, Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor Isdsztaktjpfx Ahysih 130mm dust extraction port Machine ready for operation.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Ijdszxggljpfx Ahyoih

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete Aagaard/Finnrose industrial dust extraction and filtration system, manufactured in 2006, from a wood processing company. The system is designed as a screw filter and features a complete dust extraction control system including heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Under the discharge, there is a suitable hopper with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6 m³ hopper on mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available by agreement Iiodpfxoz Ik Atj Ahyeh Dimensions Filter tower including rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from the steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower including substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed by 31.07.2027 at the latest. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his expense and responsibility. All required specialists, lifting equipment, cranes, and means of transport must be organized by the buyer. Inspection possible by arrangement. Sale from the location in its current condition. Technical data provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 24,500 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet. Iiedpjzl E N Ejfx Ahysh

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal - Projection laser SL LASER Pro Director 6 Iijdpfozz N Uqsx Ahyoh - Slotted table/magnetic table

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, OLEOPRESS OP/Z 40 hydraulic press. INJECTION MOLDING PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Isdpfx Ahjzpbc Aeysih Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approximately 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approximately 2,800 kg

Condition: excellent (used), Year of construction: 1990, Mori Seiki MV-40 machining center Year: 1990 Iodjy S T D Tepfx Ahyjih

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1000 mm Rotor diameter: 400 mm Iiodezt Intspfx Ahyoh Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It was inspected and tested by us in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.