Used Greenlifter Sgr Electric Glass Gripper for sale (33,982)

Condition: used, fuel type: electric, Year of construction: 2017, Equipment: hydraulics, tail-lift, We are offering this used Bringo Electric Vehicles DT1 electric pickup truck, manufactured in 2017. Manufacturer: Bringo Electric Vehicles Model: DT1 Year of manufacture: 2017 Condition: used Category ID: 1820 Fedpfx Aoztu Rzslbsgg Type ID: 2950 Type: Electric pickup truck with a hydraulic tailgate If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Fgedpfxsu Ur Raj Albog

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Fedpfxezxnu Ds Albsgg Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: Fsdpfxjzx Alds Albsgg - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: used, Year of construction: 1990, Used Overhauled Rinsing Machine The Used Overhauled Rinsing Machine Virmauri rinsing machine, built in 1990 and overhauled, is an industrial machine dedicated to the treatment of glass containers. With an operating capacity of 7000 bottles per hour (BPH), the device implements a system of 28 grippers for the optimization of rinsing processes. Operating clockwise, this unit features movable nozzles, allowing flexibility in specific treatment for each container. Mechanics and Operation Fgsdpfx Aljvgvwaobeg Focusing on mechanics, the device adopts a single-step treatment approach, using water as the main cleaning agent. This choice, while simplifying the process, imposes stringent requirements on the quality of the water used and on the maintenance of the nozzles to prevent cross-contamination. The clockwise rotation direction and the arrangement of the sockets have been designed to optimize the workflow and minimize downtime during production batch changes. These technical aspects require careful evaluation when integrating the machine into existing production lines. Current Status and Maintenance of Used Overhauled Rinsing Machine Regarding the current status of Virmauri, the used overhouled rinsing machine is classified “On stock”, indicating immediate availability for installation and use post-overhaul. The Used Overhauled Rinsing Machine has undergone an overhaul process to ensure its functionality and reliability over time. Maintenance management requires a meticulous approach to ensure the availability of spare parts and the technical competence for rapid interventions. Conclusions of Virmauri rinser equipment: In conclusion, the 1990 Virmauri rinser, with 28 grippers and a capacity of 7000 BPH, represents a technologically viable option for companies in the bottling industry that need an efficient and reliable unit for processing glass containers. The decision to acquire a machine of this nature requires a detailed analysis of your production needs, compatibility with existing lines and internal maintenance capabilities, to ensure optimal integration and operation. We can assure full service on this Virmauri equipment with our staff.

Year of construction: 2019, operating hours: 380 h, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed Fjdpozf A Ifsfx Albogg • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: The machines remained in working order at our customer's site until they were dismantled ----- 1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines. 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 Fodexa Hi Nopfx Albogg 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW ...

Condition: used, functionality: fully functional, This is a round filter coffee machine, a Bravilor Bonamat B20 HW. This coffee machine is ideally suited for supplying coffee in large establishments during peak hours, such as care facilities, catering businesses, company canteens, etc. The B HW series is equipped with a separate hot water tap. The containers can be easily transported. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. It has only been operated with a water softening system, so there are no limescale deposits in the system. The matching drip tray for dispensing coffee is not shown in the picture, but is also included. The base cabinets shown in the pictures are not included in the offer, but can be purchased as an optional extra. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul / inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 standard. Technical data: W x D x H: approx. 1173 x 600 x 947 mm Model with 1 brewing system and 2 containers Separate hot water tap With sight glass Coffee brewing unit Peak capacity: 40 liters Hourly output: approx. 90 liters Brewing time: approx. 14 min. / 20 liters Hot water unit Peak capacity: 4.6 liters Hourly output: approx. 20 liters Frequency: 50/60 Hz Voltage: 400 V 3 N Connection value: 11.2 kW Fgodpfx Alozxn Auobjg Further information: 1 brewing column in the center 1 coffee container on the right and left, removable With hot water dispensing: Coffee is kept warm in a container Audible signal at the end of brewing With timer Digital display Total and daily counters Descaling system Stainless steel housing Fixed water connection Condition: Used, thoroughly inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, New automatic screw capping machine 8 heads for 12000 BPH The new automatic screw capping machine, launched in 2023, presents itself as a revolution in the bottling sector. This is with particular attention to aluminum screw caps. The automatic screw-capping machine has a remarkable capacity to reach production speeds of up to 12,000 bottles per hour. This is making it one of the most efficient of its kind. Versatility is at the heart of its design. Details: This machine has 8 heads, a diameter of 288 and it a pitch of 226,08 mm Type of cups that can be used: It is able to work with a wide range of caps, including aluminum screw caps. Talog, ø 30×60, and Guala pressure, and others. This flexibility of this screw capping machine also extends to bottles, as the machine is ok for both glass and plastic bottles. This regardless of their shape, whether cylindrical or shaped. A distinctive element of the automatic screw-capping machine is its advanced cap-taking system on the fly. Equipped with a release head, this cupping machine guarantees precision and reliability at every capping cycle. This efficiency is further enhanced by the ø600 honeycomb feeder, which ensures a constant flow of production. Once your order is placed, the final phase of wired electrical system implementation and programming is completed within 30 days. Process of production of the automatic screw capping machine: This process has been designed to ensure that the screw capping machine is properly made and customized according to the specific needs of the customer, ensuring its operational readiness in an optimal time frame. Its robust structure, made of AISI 304 stainless steel, promises resistance and durability over time. Furthermore, the capping heads, equipped with springs and an M32x1.5 connection, have been designed to be easily removable, making any maintenance or intervention a simple and direct operation. Fsdpfxovguczj Albogg The capping machine is made with automatic safety systems. This is to ensure that the capping process runs smoothly and with the utmost attention to the operator. In summary: The new capping machine for aluminum screw caps represents a perfect balance between innovation, efficiency, and safety. offering companies a cutting-edge solution for their bottling needs.  

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: MITSUBISHI, controller model: CR750-04VD1-1-S15, number of axes: 6, This 6s Mitsubishi Electric RV-4FLM robot arm was manufactured in 2018. It features a reach of approximately 649 mm and a payload capacity of up to 4 kg, making it suitable for various industrial automation applications. Consider the opportunity to buy this Mitsubishi Electric RV-4FLM robot arm. Contact us for further details. • Quantity: 2 similar robots available • Reach: approx. 649 mm • Payload: up to 4 kg (nominal 3 kg) • Repeatability: ±0.02 mm • Protection class: IP67 • Controller: CR750 • Teach pendant: R32TB (handheld device) Fsdpfx Aoyhddnelbjgg • Connection: Robot-to-controller cable included • Suitable for applications in industrial automation

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Fgedpfsx Trg Aex Albsg

Condition: used, mileage: 91,200 km, power: 125 kW (169.95 HP), color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Fjdszz E H Aepfx Albogg A50 Front axle with increased load capacity, AR2 Axle ratio i = 3.923, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CB7 Stabilization Level I, CL1 Steering wheel adjustable in inclination and height, CT1 Vibration damper, CW2 Omission of vehicle lowering, D03 High roof, D50 Continuous partition, E07 Hill start assist, E1D Digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E43 Trailer socket 13-pin, E46 Socket in the driver's cab, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, ED8 Pre-wiring, configurable special module, ES0 Jump start contact, ES5 Charging package for instrument panel, F1K Clothes hooks in the driver's cab, F2W Winter package, F64 Exterior mirrors electrically foldable, F68 Exterior mirrors heated and electrically adjustable, F907 SERIES 907 TRANSPORTER VS30, FF5 Storage compartment above the windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FKA BOX VAN, FM3 WET WIPER SYSTEM, FU5 Exterior mirrors without indicator, G43 9G-TRONIC, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Heat-reflecting glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IL5 Left-hand drive, IR6 Wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-tonne, J10 Speedometer km/h, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage Maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L44 Direction indicator lamps front, side, L65 Ceiling lamp(s) LD-/FG area with door contact, L71 Load space lighting via motion detector, L94 Omission of parking lights, LA2 Headlamp Assist, LB1 Lateral marker lights, LB5 3rd brake light, LC2 LED light strip in the load compartment, LE1 Adaptive brake light, LG7 LED High Performance headlights, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle HVO capable, MJ8 ECO Start-Stop function, MS1 TEMPOMAT (cruise control), MT5 EMISSION CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, P2L Load compartment package 2, P4F Rating country set Euro-NCAP, Q11 Longitudinal member reinforcement, Q67 Towing eye rear, RY2 Tire pressure monitoring on front and rear axle, wireless, S02 Driver's seat, S23 Co-driver's seat two-seater, SA5 Airbag driver, SA6 Airbag co-driver, SK2 Seat occupancy recognition driver's seat, T16 Sliding door right, T75 Grab handles for entry driver and co-driver, T77 Grab handle entry load compartment sliding door on partition, T85 Entry handle on rear corner pillar left, T86 Entry handle on rear corner pillar right, V3L Floor mats all-weather, V42 Lashing rails side wall on the retaining strap, V43 Wooden floor, V52 Wheel arches can be loaded, V94 Cable duct on side wall, V95 Cable duct on rear portal, VA2 Interior panelling load compartment up to roof height (wood), VC4 Lashing rails side wall on roof frame, VF7 Fabric Maturin black, VV2 Cargo anchoring rail system, W54 Rear

Condition: used, functionality: fully functional, Year of construction: 2012, For sale: Electric Overhead Travelling Crane 10 T (AT-101, 2012) Condition: Very good, well-maintained, and technically sound. Reliable electric overhead travelling crane (Electric Hoist Type AT-101) designed for lifting and transporting heavy loads in manufacturing and storage facilities. Technical specifications: Model: Electric Hoist Type AT-101 Lifting capacity: 10 tons Lifting height: 12 m Lifting speed: 8 m/min Travel speed: 20 m/min Power supply: 380 V Fgodpfxexm Tr Do Albjg Duty cycle: 25% ED (short-term periodic duty) Year of manufacture: 2012 Application: Electric overhead travelling crane designed for lifting, transporting, and positioning heavy loads, equipment, or metal blanks. Suitable for use in: - manufacturing workshops, - mechanical repair shops, - warehouses and logistics centers, - metal processing lines. If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2007, operating hours: 10,000 h, machine/vehicle number: ET212, Used Labeling Machine PE LABELERS Universal Master up to 7500 bph The Machine delivers advanced technology for labeling glass bottles, meeting production demands of up to 7500 bottles per hour. Furthermore, P.E. Labellers manufactured this machine in 2007, ensuring precise operations with its robust design and integrated features. Technical specifications and performance of the Used PE Labellers Labeling Machine The labeller includes eight rotating plates and five labeling stations. Specifically, three stations apply adhesive labels, while two use cold glue. The machine rotates clockwise, which streamlines bottle flow management. Additionally, its manual adjustment system for both the head and labels enables quick adaptations to different formats, thereby enhancing flexibility. Production capacity and configuration The labeller handles glass bottles with a maximum diameter of 120 cm and a standard 0.75-liter format. Consequently, it operates at a top speed of 7500 bottles per hour, making it ideal for medium-scale production lines. Moreover, the system applies labels to the front, back, and neck of each bottle, ensuring a high-quality, professional finish. Fedpovgu Udofx Albogg Labeling method and management in the Used PE Labellers Labeling Machine This machine applies labels using adhesive and cold glue methods. Therefore, this dual approach ensures compatibility with a wide range of label designs and materials. Meanwhile, operators manually adjust the system to maintain precise control during each production batch. Current state and operational specifications The machine remains in storage; however, it is ready for immediate deployment. It has recorded 10,000 working hours, yet it still offers substantial operational capacity. Furthermore, its robust build, weighing 2250 kg, ensures stability and durability even under high-speed conditions. Electrical data and power requirements The labeller PE LABELERS Universal Master up to 7500 bph runs on 400 V, with an installed power of 5 kW and a frequency of 50 Hz. As a result, its electrical configuration meets industrial standards, ensuring efficient energy usage for extended operations. Additionally, its energy efficiency supports long-term cost savings. Applications and technical advantages The Used Labeling Machine PE LABELERS Universal Master up to 7500 bph ensures efficient and accurate label placement. Similarly, its versatile labeling stations handle bottles of various shapes and sizes without compromising output quality. Consequently, this versatility makes it a reliable option for many bottling operations. Technicians and industry experts rely on this machine for its performance and customizable configurations. Above all, it represents an excellent choice for demanding bottling applications.

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts Fgsdpfjixxwmox Albeg -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Year of construction: 2022, operating hours: 24 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details. • Machine type: Fully electric CNC wire bending machine with automatic wire feeder • Number of axes: 9 • Configuration: Dual-head design with two wire bending heads • Maximum wire diameter: • Up to 12 mm (1/2") for wire with tensile strength of 600 MPa (87,000 psi) • Up to 10 mm (3/8") for wire with tensile strength of 1,000 MPa (145,000 psi) • Maximum distance between bending heads: 3,070 mm (121")The machine is equipped with VGP3D 3D graphical programming software featuring: • Realistic 3D simulation for part feasibility verification • Automatic collision detection • Cost estimation • Automatic machine cycle generation • Automatic optimization of the bending sequence Standard and Included Equipment • Centrally positioned 3D manipulator • Head-mounted grippers for workpiece holding and ejection Fgodpfxszqtgve Albjg • Variable-radius bending • 6-position bending turret • Automatic wire feeding unit • End-processing carriage with linear orthogonal wire cutting unit • Wire cutting capacity: up to 12 mm (1/2") for wire with a tensile strength of 600 MPa (87,000 psi) • Wire chamfering unit • CE compliantDH4005-03 • Tube straightener and RV straightening unitDHSD4-02 • Straightening rollers (9+9) with V-groove for wire diameters from 2 to 4 mmDHSD6-02 • Straightening rollers (9+9) with V-groove for wire diameters from 4 to 6 mm

Condition: used, mileage: 15,950 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, number of seats: 8, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Fjdpfx Alezpdgkobegg A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active Brake Assist, BH1 HOLD function, C6L Multifunction steering wheel, CF7 Comfort chassis, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, CU4 Aerodynamics package, E07 Hill start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E4S Smartphone integration package, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in luggage compartment/cargo area, ES3 12V sockets for rear seat rows on the right and left, EW6 Pre-installation for Remote Services Plus, F2W Winter package, F3Z Comfort closing, F61 Interior mirror, F66 Lockable glove compartment, F68 Exterior mirrors, heated and electrically adjustable, FF1 Center console with storage compartment, FJ3 Double cupholder in the center console, FKB PANEL VAN, FP4 Chrome interior package, FY7 Multi-button remote control, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, HZ0 Auxiliary heater, electric, HZ7 Climate control system semi-automatically controlled, TEMPMATIC in the rear, IL5 Left-hand drive, IL6 Metallic paint, IN2 Wheelbase 3200 mm, long overhang, J2W Maintenance interval 2 years, J55 Seatbelt warning system for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JB7 Parking package with reversing camera, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, K51 Mis-fueling protection, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, LA2 Headlamp Assist, LC8 Ambient lighting, tailgate, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, M6A EMISSIONS STANDARD EURO 6E-BIS M1, M72 Vehicle capable of using HVO fuel, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 Cruise control, MU4 OM 654 DE 20 LA 120 kW (163 hp) 3800/min, MX0 BlueEFFICIENCY package, P4F Rating country set Euro-NCAP, Q50 Trailer coupling, ball head, removable, QA4 Trailer load 2500 kg, RY2 Tire pressure monitoring system on front and rear axle, wireless, SA1 Seat cushion depth adjustment driver, SA2 Seat cushion depth adjustment front passenger, SA6 Airbag front passenger, SB1 Comfort driver's seat, SB2 Comfort front passenger seat, SE4 Lumbar support front passenger seat, SE5 Lumbar support driver's seat, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag front passenger, SH9 Windowbags for driver and front passenger, SK2 Seat occupancy recognition driver's seat, SK6 Child seat recognition in vehicle, passive, T14 Active door closer, sliding door, T19 Sliding door, left, T70 Child lock on doors in the passenger compartment, T74 Grab handle for entry, U3V Seat arrangement vis-à-vis 1st row of rear seats, rails, U73 Armrests for seating in the passenger compartment, UR1 Seat rail system with quick-release mechanism, US4 3-seater bench seat, comfort, 1st row, outer seat foldable, US5 3-seater bench seat, comfort, 2nd row, outer se

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 63,000 h, laser type: fiber laser, laser hours: 48,000 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Model: TruLaser 5030 fiber (L41) Year of manufacture: 2013 A new cutting head was installed in 6/2026! Machine hours: 63,000 machine hours, 48,000 laser hours Working area: 3000 x 1500 mm Standard equipment Machine • Enclosed machine frame • Torque drive in combination with linear direct drives • Enclosed beam guidance via fiber optic cable • Machine cooling unit (water-air) • Integrated control cabinets with interior lighting • Automatic pallet changer in the longitudinal direction • Wide longitudinal conveyor belt • Power supply for TruDisk via the machine • Work area lighting • Positioning laser diode • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning Fgodjzrxdvjpfx Albjg TRUMPF Laser • Solid-state laser TruDisk 3001 with one fiber optic cable outlet • Fiber optic cable according to standard layout • Laser cooling unit (water-air) • Excitation via pump diodes • Laser power control • Laser logbook function Cutting head • Universal cutting head with fully adaptive lens system • Protective glass against lens contamination • Condition monitoring of the protective glass • ControlLine: Height control and sheet edge detection Control system • Control system SINUMERIK 840D SL • 17" touch color screen • Simple workshop programming • Advanced workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • FastLine • AdjustLine • Teleservice via internet data transmission • USB interface • RJ-45 network connection Safety • CE marking • Light curtains • Multi-chamber extraction system • Integrated compact dust extraction system • Fire alarm system in the compact dust extractor • Machine enclosure, certified viewing window, door on the right • Electric roll-up roof

Condition: used, mileage: 60,000 km, power: 120 kW (163.15 HP), color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, = Additional Options and Accessories = - Passenger airbag - Electronic window lifters - left - Electronic window lifters - right - Driver airbag = Notes = - To ensure you receive the best possible advice, we kindly ask you to schedule an appointment. Mr. J. Ebert will be happy to assist you. NIGHT BLACK, FABRIC Fodpfx Aozbzhdslbogg BLACK / ANTHRACITE, VEHICLE PRODUCTION LOCATION RASTATT, PARKING PACKAGE, MIRROR PACKAGE, URBAN / PROGRESSIVE PACKAGE, DIGITAL PACKAGE, CONNECTIVITY PACKAGE PREMIUM, EQUIPMENT PACKAGE ENTRY, SEAT COMFORT PACKAGE, LIGHT AND VISIBILITY PACKAGE, SMARTPHONE INTEGRATION PACKAGE, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, REAR VIEW CAMERA, REAR SEAT BELT STATUS INDICATOR, LUMBAR SUPPORT ADJUSTMENT, ACTIVE PARKING ASSISTANT, ACTIVE LANE KEEPING ASSISTANT (CAMERA), INTERIOR MIRROR WITH AUTOMATIC ANTI-GLARE FUNCTION, COLLISION WARNING SYSTEM WITH ACTIVE BRAKING FCW-STOP, THROUGH-LOADING FEATURE, KNEE AIRBAG, RAIN SENSOR, DOUBLE CUP HOLDER, RAIN SENSOR, HARD DRIVE NAVIGATION, AUTOMATIC 8-SPEED TRANSMISSION, CRUISE CONTROL, HEATED STEERING WHEEL, TIRE PRESSURE MONITORING SYSTEM (TPMS) HIGH LINE / MID LINE, COMFORT SUSPENSION, EXTERIOR MIRRORS, LEFT AND RIGHT, FOLDABLE, TRAFFIC SIGN RECOGNITION, DIGITAL RADIO STANDARD DAB (DIGITAL AUDIO BROADCAST), SUN VISOR WITH ADDITIONAL FUNCTION, CLIMATE CONTROL, ROOF LINING FABRIC GRAY, AUTOMATIC HIGH BEAM ASSIST PLUS (IHC+), HEADLIGHTS LED DYNAMIC RIGHT-HAND TRAFFIC, ADDITIONAL USB PORTS, ROLLER BLIND CLOSED, AC CHARGING FUNCTION WITH 3.7 KW CHARGING POWER, DARK TINTED GLASS, CENTRAL DISPLAY MID (9 INCH TO 11.5 INCH), HEATED DRIVER AND PASSENGER SEATS, HEATED WINDSHIELD WASHER SYSTEM, AUTOMATIC REAR DOOR, ADJUSTMENT OF STEERING WHEEL CONTROLS FOR ASSISTANCE SYSTEMS, I-SIZE MARKING (ISOFIX SUCCESSOR), DRIVING PROGRAM SELECTOR (AGILITY SELECT), SPORTS STEERING WHEEL SPLIT LEATHER SMOOTH, DISPLACEMENT 1.4 LITERS, R4 PETROL ENGINE M282 1st owner (German vehicle), We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Errors and prior sale excepted - Electronic immobilizer, ESP, Navigation system, Service booklet available, Warranty, Rain sensor, Electric side mirrors, Bluetooth, On-board computer, Hands-free system, Multifunction steering wheel, Isofix, Light sensor, Non-smoking vehicle, Start/stop system, Lane keeping assist, Emergency brake assist, Armrest, Heated steering wheel, Electric tailgate, Leather steering wheel, Lumbar support, Driver drowsiness detection, Emergency call system, Tire pressure control, Gearshift paddles, Sound system, Voice control, Touchscreen, USB, Traffic sign recognition, Glare-free high beam, Winter package, Distance warning, WLAN / Wifi hotspot, Apple CarPlay, Android Auto, Fully digital instrument cluster, Interior mirror with automatic anti-glare function, Speed limiter, Plug-in hybrid, High beam assistant, Tinted windows, Electric side mirrors foldable, Distance warning = Further Information = Engine displacement: 1,332 cc Number of owners: 1 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 1999, Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph This Used Rinser  not only delivers high efficiency but also ensures excellent performance for bottle rinsing. Procomac manufactured this system in 1999, and designed it to operate at a maximum speed of 6000 bottles per hour (BPH). As a result, this setup guarantees optimal performance in production lines. The rinser handles bottle formats ranging from 0.20 to 1.5 liters, providing versatility and adaptability in different production settings. Furthermore, its robust construction adds to its overall efficiency. Technical Features of the Rinsing Machine PROCOMAC Gripstar The Gripstar rinser features 32 grippers that operate in a clockwise rotation. Consequently, this design stabilizes the bottles during the rinsing process and reduces the risk of damage or malfunction. In addition, the system incorporates fixed nozzles, which simplify maintenance and minimize wear over time. Moreover, this technical setup improves the longevity of the machine, making it a reliable choice for high-speed operations. Types of Treatment and Configuration The machine supports a single treatment cycle, allowing it to perform rinsing using either water or air. This is important because it makes the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph suitable for a wide range of products, from food-grade liquids to cosmetics. Additionally, its modular configuration enables seamless integration into existing production lines without requiring significant structural changes. Thus, it offers flexibility in various production environments. Therefore, manufacturers can easily adopt it even in complex setups. Fgsdpfxsvgvips Albog Operating Conditions and Current Status The Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph remains stored in excellent condition, ensuring it is fully operational once installed. Despite the fact that the machine dates back to 1999, proper storage has preserved its functionality. Because of its durable design, it will continue to deliver reliable performance for years. Moreover, the use of standard components simplifies maintenance and part replacement, which helps reduce downtime as well as operating costs. In other words, the machine is built to last and operate efficiently under various conditions. Electrical Data and Energy Consumption This machine runs on 415 volts, consuming 3.1 kW of power at a frequency of 50 Hz. The machine draws 5.4 amps, ensuring energy efficiency compared to similar models. Thus, these specifications make the system compatible with most industrial electrical infrastructures. As a result, the machine ensures smooth installation while minimizing energy costs. In addition to its energy-saving features, the machine supports a sustainable production process. Conclusion of the Rinsing Machine PROCOMAC Gripstar In summary, the Used Bottle Rinser PROCOMAC Gripstar up to 6000 bph offers reliability and speed, making it an excellent choice for bottling lines.

Condition: used, Year of construction: 2003, machine/vehicle number: LC632, Used KRONES spirits filling line, roud glass 36.000 BPH - year 2003Technical Specifications & Performance DataThis complete round glass bottling line delivers high-speed performance for industrial packaging and beverage production. Built around Krones engineering, the line is configured for glass bottles in 0.7L, 0.75L, and 1.0L formats. With an output of 500–600 BPM (up to 36,000 bottles per hour), it is a robust second hand solution for producers seeking reliable throughput and consistent product quality.Production speed: 500–600 BPM (up to 36,000 bph)Filling type: vacuum filingBottle formats: Compatible with 0.7L, 0.75L, 1.0L bottle formatsContainers: Designed for Glass bottle handlingCore components (models): Krones Variojet (72-head rinser), Krones Isofill (108-head isobaric filler), Krones Topmatic/Zalkin (18-head capper), Cold glue front & back labeling, Logics & Control Logilook label inspection (2015), Krones Kettner Wrapapac W60 (wraparound case packer), Krones/Kettner Robogrip robot, Krones Multidivider laner, Amberflex spiral case elevator, Linx 7900 bottle coder (2017), Orwak 9020 waste compactor (2006)Case formats: Wraparound boxes, 6 & 12 pack configurationsMain build year: 2003 (with upgrades in 2006, 2015, and 2017)Electrical supply: 415 V, 50 Hz (most main equipment); auxiliary devices at 240 V, 50 HzAdvanced Automation & Control SystemsThe line integrates automated material handling and inspection to ensure stable operation and quality assurance. The Krones Multidivider laner and Robogrip robotic handling enhance flow balance and downstream palletizing, while the Logilook system provides label presence and position verification. Changeovers between compatible glass formats are supported by standardized Krones change parts and adjustable guide-rails for efficient setup.Automated depalletizing, lane division, and robotic case handlingInline label inspection for consistent presentationOperator HMI terminals at key stations (typical Krones layout)Rapid format adjustments for 0.7L, 0.75L, and 1.0LStable 50 Hz operation; widely supported industrial componentsProduction Line Integration CapabilitiesThis used bottling line is designed for seamless in-line operation from bottle depalletizing to case packing. It accommodates round glass bottles and integrates labeling, coding, and inspection for end-to-end quality control. The wraparound case packer enables efficient secondary packaging for 6- and 12-pack configurations, ensuring compatibility with standard palletizing patterns.End-to-end flow: depalletizer → rinser → isobaric filler → capper → cold glue labeller → label check → coder → laner → case packer → spiral case elevator → palletizing robotSuitable for beverage production requiring glass bottle processingModular stations allow standalone testing or full inline operationMachine Condition & Maintenance HistoryManufactured in 2003 with subsequent upgrades in 2006 (waste handling), 2015 (label inspecti... Fedpfxjy Ud Alj Albjgg

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The SF 600 is a professional, self-propelled telescopic vacuum lifter designed for the safe transport, lifting, and precise installation of heavy glass panels, windows, and other large, flat materials. Thanks to its compact design, electric drive, and hydraulic telescopic boom, the machine can be operated by a single person and offers excellent maneuverability both indoors and on construction sites. The powerful dual vacuum system with six suction pads ensures secure handling of glass and other smooth-surface materials. The adjustable suction frame allows the load to be rotated, tilted, and positioned precisely during installation. The SF 600 is an excellent solution for window installers, glazing companies, façade contractors, production plants, and companies handling large panels. Suitable for handling: glass panels windows and doors façade glazing sheet metal sandwich panels smooth wall panels other large, flat materials suitable for vacuum lifting Technical Specifications Maximum lifting capacity: 600 kg Capacity at maximum outreach: 250 kg Maximum lifting height: 3,700 mm, measured to the center of the suction frame Horizontal outreach: up to approx. 2,800 mm Telescopic cylinder stroke: 780 mm Front axle side shift for easier positioning Battery: 24 V / 120 Ah Working time: up to 20 hours Charging time: approx. 8 hours Electric drive motor: 1.5 kW, rear-wheel drive Hydraulic motor: 2.2 kW Dual vacuum system 6 vacuum suction pads Suction pad diameter: 300 mm Suction frame dimensions: 1,350 × 1,000 mm Maximum suction frame rotation: 270° Suction frame tilt: 130° Side rotation for positioning: 90° Manual rotation with spring-loaded positioning lock Wired remote control Transport dimensions: approx. 2,400 × 1,000 × 1,550 mm These specifications, including the 24 V / 120 Ah battery, up to 20-hour operating time, 1.5 kW drive, 2.2 kW hydraulics, and six 300 mm suction pads, are provided in the supplied WCR60 technical documentation. Main Advantages The SF 600 combines lifting capacity, reach, and precise load control in one compact machine. Its self-propelled electric drive significantly reduces manual handling and enables the safe movement of heavy glazing around the workplace. With its telescopic boom and multi-directional suction frame, the operator can accurately position glass, even in difficult installation locations. It is particularly suitable for installing large windows, glass façades, conservatories, and heavy glazing elements. A cost-effective alternative to machines such as Smartlift, designed for professional glass handling and installation. Fgodpozyy Sdjfx Albeg

Condition: used, Year of construction: 2014, machine/vehicle number: M298, Used filling monoblock AMS FERRARI 12/12/1 year 2014 The Used filling monoblock AMS FERRARI 12/12/1 year 2014 delivers a compact, integrated isobaric bottling solution for beer production in glass bottles. AMS FERRARI manufactured this model in 2014 and designed it to combine rinsing, filling, and capping into a single mechanical unit. As a result, this configuration reduces handling times and optimizes floor space in medium-scale bottling facilities. Mechanical and production configuration The Used filling monoblock AMS FERRARI 12/12/1 year 2014 includes 12 rinsing grippers, 12 filling valves, and a capping module with two heads. The machine processes containers ranging from 0.33 to 1 liter in a clockwise rotation. Consequently, it suits a variety of bottle formats common in beer packaging. It operates at a nominal speed of 1,800 bottles per hour. Moreover, the system provides a stable and continuous workflow for consistent production output. Operators disassembled the machine after it ran for approximately 200 hours, during which it bottled around 300,000 liters. Due to its low usage, the equipment shows minimal mechanical wear and preserves the integrity of key components. Production teams can, therefore, integrate this equipment into existing lines or use it as the base for new installations. In both cases, the monoblock ensures mechanical uniformity and high reliability. Rinsing section The rinsing module on the Used filling monoblock AMS FERRARI 12/12/1 year 2014 uses 12 mechanical grippers to handle the bottles. The system performs two rinsing treatments, ensuring internal sanitization before filling. In addition, the grippers support both 0.33 and 0.75 liter glass bottles, which makes the machine suitable for a wide range of beer formats. Thus, the rinsing system contributes to maintaining hygiene standards across all packaging sizes. Filling section The filling section uses 12 traditional isobaric valves with mobile nozzles. The system maintains pressure balance during filling and minimizes foam generation or CO₂ loss. This feature, in turn, protects product quality and prevents waste. Furthermore, the mechanical design ensures ease of cleaning and straightforward maintenance. These characteristics make the equipment ideal for beer bottling, where pressure control directly influences final product consistency. Operators rely on the mobile nozzle configuration to handle bottle variations with minimal adjustment. Also, the isobaric valves support repeatability across extended production cycles. Altogether, these features improve filling performance while maintaining operational efficiency. Capping section The capping module of the Used filling monoblock AMS FERRARI 12/12/1 year 2014 applies crown caps using two heads. The system supports both 26 mm and 29 mm caps and uses mechanical force to seal each bottle with consistent pressure. Unlike electronic systems, this mechanical configuration simplifies service and ensures predictable performance. Fgodpfx Asw Ag Ndelbjg

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: white, gearing type: mechanical, number of seats: 5, Year of construction: 2026, Equipment: ABS, air conditioning, - In order to provide you with the best possible advice, we kindly ask you to make an appointment. Mr. Kiel will gladly assist you. Tel: Fsdpfx Aey Adcbslbsgg A50 Front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 Active Brake Assist, C6L multifunction steering wheel, CB8 Stabilization Level II, CL1 steering wheel adjustable in tilt and height, CL2 leather steering wheel and leather gear shift lever, CW2 vehicle lowering omitted, D03 high roof, D93 partition omitted, E07 hill start assist, E1D digital radio (DAB), E1U USB socket 5 V, E3J switch panel pre-installation, E57 electrics for trailer socket, E7B navigation system pre-installation, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, EE1 230 V socket, EK1 terminal strip for electrical connection, ES0 jump-start contact, ES5 instrument panel charging package, F61 interior rear-view mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF5 overhead storage above windscreen, FJ1 folding cover for storage compartment, FJ4 storage compartment under dashboard, FKA PANEL VAN, FM3 WET WIPER SYSTEM, GD8 6-speed manual transmission ECO Gear 360, H00 warm air duct to passenger compartment, H12 hot water auxiliary heater, H16 seat heating for driver, H21 heat-insulating glass with band filter on windscreen, HH2 electric auxiliary air heater, HH9 SEMI-AUTOMATICALLY CONTROLLED TEMPMATIC AIR CONDITIONING, IL5 left-hand drive, IR6 wheelbase 4325 mm, rear overhang 1615 mm, IT4 3.5-tonner, J10 speedometer km/h, J55 seat belt warning device for passenger seat, J58 seat belt warning device for driver's seat, J65 outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JB7 Parking Package with reverse camera, JF1 rain sensor, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 initial maintenance interval 60,000 km, JK5 instrument cluster with color display, JS2 intelligent speed assist, JW8 ATTENTION ASSIST, KB7 main fuel tank 93 liters, KP7 SCR emission control generation 4, L LEFT-HAND DRIVE, L13 fog lamps with cornering light, L94 parking light omitted, LA2 headlight assist, LB1 side marker lights, LB5 third brake light, LE1 adaptive brake light, LX5 Europe, M60 alternator 14 V / 250 A, M6B EMISSION CLASS EURO 6E TO N1, M72 vehicle HVO capable, MJ8 ECO start-stop function, MK2 speed limiter 130 km/h, MS1 cruise control, MU5 OM 654 DE 20 LA 125 kW (170 HP) 3800 rpm, P4F country set rating Euro-NCAP, Q11 longitudinal member reinforcement, Q67 rear tow hook, R65 spare wheel carrier under frame end, R87 spare wheel, RY2 wireless tire pressure monitoring on front and rear axles, RZ2 wheel manufacturer Magnetto Wheels, S04 adjustable passenger seat, S22 driver's seat armrest, S25 passenger seat armrest, S87 low driver's seat box, SA5 driver airbag, SA6 passenger airbag, SB3 comfort suspension seat, driver's seat, SK0 comfort headrest driver, SK2 driver's seat occupancy detection, T16 right-hand sliding door, T74 entry grab handle, T86 entry grab handle at right rear corner post, U22 pre-installation seat configuration 3/-/-, U65 passenger compartment seating 3-seater bench 1st row, V36 roof lining, V40 Kombi floor assembly, V43 wood flooring, VA1 load compartment trim up to standard belt rail, VA7 storage compartment with net in rear doors, VF7 Maturin black fabric, W16 fixed window front left in side wall/sliding door, W17 fixed window front right in side wall/

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,215 h, travel distance X-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, spindle speed (max.): 20,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5 axis MTcut UDS80H-5A was manufactured in 2019 (new spindle and magazine (including the motor) 2026). It features a 20,000 rpm spindle, 120 Nm torque, and 35 kW drive power. Equipped with a HSK63 tool holder, 96-position tool changer, and a Kessler rotary tilting table with an 800 mm diameter. Includes Heidenhain TNC 640 control, 15" TFT screen, and Ethernet connectivity. Ideal for precision machining with its Heidenhain glass scales and BLUM laser tool measurement. Contact us for more information about this machine. • Operating hours: Control unit 6,904 h; Machine 5,480 h; Program runtime 2,215 h • Spindle: 120 Nm torque, separate spindle cooling for constant temperature • Tool interface: HSK63 with blow-out function • Rotary table: 800 mm diameter; Kessler rotary tilting table with 2 A-axes and 1 C-axis, direct-drive torque motors • Feedback: Heidenhain glass scales in all 5 axes • Tool changer: 96 positions with double-arm gripper • Control: 15" color TFT screen • Connectivity: Ethernet interface, 2x USB ports • Control functions: Plain text programming; short block processing time; create new program while another is running; proven Heidenhain machining cycles • Electronic handwheel • CE certified Additional equipment • Chip conveyor • Coolant system • Internal high-pressure coolant 50 bar with belt filter system • Coolant and compressed air gun • BLUM laser tool measurement • Heidenhain TS460 workpiece probe system for HSK63 with radio and infrared transmission • Heidenhain KinematicsOpt including Heidenhain calibration sphere KKH 250 • Extraction system: Filtermist FX4002, air volume 1,250 m³/h Fgedex D In Uepfx Albeg • Rotating viewing window • Work area light • Tool package Technical Specification Taper Size HSK 63