Used Sheet U. Profile Steel Shear for sale (59,325)

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Nljdpfx Astvb Iusfasa Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: new, Year of construction: 2026, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; Nljdpfx Afsh I Nw Deasa ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: good (used), functionality: fully functional, Year of construction: 1987, Shearing force 60 t Punching force 40 t Section steel shear L- and T-iron at 90°: 100 x 10 mm at 45°: 65 x 8 mm Nledpfxex Symnj Afaea Notching unit with square notcher for sheets up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - electric back gauge 3000 mm - stop table - adjustable hold-down - tool package Validity of safety inspection until Feb. 2026

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, Nsdpfx Aovg R Rzofaola angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a Nedogvkmnopfx Afasla material strength of 450 N / mm². Electric 380 volt

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW Nlodpfx Asxabi Rofaja weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: new, pressure 60,0 t square edge steel 35,0 mm L-beam 120x120x12 mm round bar steel 40,0 mm punching cross-cut in cmm Ø28 in 15 / Ø38 in 11 mm throat 220 mm flat steel 200x20 / 300x15 mm blade length 317 mm Nlsdpfxoxcuxqs Afaja oil volume 45,0 ltr. work height max. 940 / 1140 mm strokes per minute max. 26 work stroke 55,0 mm total power requirement 4,0 kW weight of the machine ca. 1425 kg. Dimensions (HxWxD) 1510 x 590 x 1570 mm Furnishing: - Support table at the hole punch - Support table on the square notcher - foot switch - Bed. Instructions - CE declaration + MUBEA - punch and die holder

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch Nlodsxaat Uopfx Afaja - Central lubrication system - Connection cable + connector

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: Nledpfx Asf Ek H Uofaea -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Condition: good (used), Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut Nlsdpfefndy Nox Afaja -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm . Flat steel shears: 500 x 18 mm . Notching device with rectangular tool up to 13 mm . Profile steel shears, L-steel, 90° mm . Nljdpfxeyfibgj Afasa - Machine in good original condition!! approx. 70 sets of hole punching tools . .

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Nlsdpsxcay Hsfx Afaja Accessories: various dies and various punches and small punches (see photo) *

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t Nedswp Edaepfx Afasla dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Nlsdpfx Afsw Dd Hpjaoa Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 3,000 h, machine/vehicle number: 9375, control type: manual, degree of automation: semi-automatic, actuation type: electric, working width: 3,020 mm, sheet thickness (max.): 1 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, table height: 850 mm, back gauge adjustment: manual, back gauge: 520 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,400 kg, total length: 3,350 mm, total width: 700 mm, total height: 1,120 mm, Equipment: emergency stop, foot remote control, We offer a used OK GÉP XCM 3 sheet metal shear, year of manufacture: 2018. Nljdpfxjx Upfxs Afasa Type: XCM 3 Serial number: 93/75 Date of manufacture: 2018.11 Max. shearing force: 1 MN Power requirement: 3 N PE AC 50 Hz 400 V Motor power: 4 kW If you have any questions or need further information, please send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used punching and shearing machine from Peddinghaus Model: Peddimaster 110/170 Punching capacity: 110 tons Shearing capacity: 170 tons Njdpfsx Iicwjx Afaela Includes side stop and various tools

Condition: ready for operation (used), Year of construction: 1987, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,600 kg, total length: 22,000 mm, total width: 27,000 mm, total height: 16,000 mm, cutting length (max.): 2,000 mm, throat depth: 300 mm, Hydraulic shear, cutting length 2050 mm, cutting capacity 4 mm, throat 300 mm, motor 7,5 KW, working high 800 mm, back gauge 1000 mm motorised, dimension 2700x2200x1600 mm, weight ca. 2600 kgs Njdpfjtwzctsx Afajla

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Nledsvvwdyspfx Afaja

Condition: ready for operation (used), Year of construction: 2004, control type: manual, actuation type: hydraulic, working width: 2,050 mm, stroke rate (min.): 18 1/min, stroke rate (max.): 18 1/min, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 1,000 mm, power: 15 kW (20.39 HP), overall weight: 7,600 kg, total length: 2,400 mm, total width: 1,900 mm, total height: 2,000 mm, number of support arms: 2, Cutting length 2050 mm, cutting capacity 10 mm, motor 14,5 KW, working high 800 mm, back gauge 5-1000 mm motorised, 2 frontsupports, dimension 2700x1900x2000 mm, weight ca. 7600 kgs Nsdoxx Sm Depfx Afaola

Condition: new, neu ca. 8 Wochen ab Auftragse Nlodowirgbspfx Afaea Spanien 19600 € 376.32 € 55 to 500 mm 5 40/10 bzw. 20/20 mm 20 mm 37 1/min 300x15 / 200x20 mm 10x42x90 mm 5 kW 2100 mm 1160 mm 2090 mm 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 24800 € 476.16 € Nodjwiq Evspfx Afajla 60 to 500 mm 5 2 40x11 mm 32 1/min 350x10 mm 120x10 mm 45/40 mm 100x10 mm 150x10 mm 5.5 kW 2100 mm 1400 mm 2060 mm 1750 kg 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH

Condition: new, Universal scissors for cutting metal sheets Base included Working length ----- 1000 mm Sheet thickness ----- 1.5 mm Weight ----- 70 kg Nlsdpfx Afsga T Efsaea

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Nlsdpfsq A I Upjx Afasa Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Nsdpfx Ajghaywefaela Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request.

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm Njdswiq D Espfx Afajla 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear