Used Profilator Dv370-Hl-05 for sale (12,279)

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. Bedpfxezrk Rbo Al Rjwr * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: good (used), Year of construction: 2005, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2005 CIMC tank container 20FT ISO tank container, 25,010 L / 1 compartment. T11, UN PORTABLE Steam heating Bottom discharge Design temperature: -40/+130 °C 5Y+CSC test valid until 05/2027 Bedpfjzb Ei Esx Al Rswr = Additional Information = General information Year of manufacture: Aug. 2005 Model year: 2005 Weights Empty weight: 3,800 kg Payload: 32,200 kg Gross weight: 36,000 kg Functional Cargo volume: 25,000 l Body brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: good Further information Contact Arne Honingh for more information.

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60/3 MD Bsdjgh T Hkopfx Al Rowr - year of construction 2026 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  - Electrical panels for tanks and pumps - Stainless steel tank | model DFF99 | 2000 | 25,000 liters - Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) - Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) - Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp - 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters - 2x Fermentation tank | 3,000 liters - 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters - Open tank - Low tank | model STORK TGSW - Filter | model PSF JB | 2017 - Grinder | model OOEHLER OL 6000 | 2016 - Silo and feeder - Resistance tank | model PROMINOX | 2016 | 3,000 liters - 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters - Filter tank | model PROMINOX | 2016 | 4,500 liters - 2x Pump | model MIM GRUP FL31Cl - Pump | model CALPEDA MXH 204/A - Industrial scale | model GRAM MISSIL F2-60 - Pump | model LOWARA HTB 32-125/30 - Pump | model ABB INOX MIM GRUO FLUID-102 - Industrial sink - Refrigeration chamber - Pump | model PYD SH2-40 - Osmosis system | model HIDROTEC Bjdpfx Ajtzg H Dsl Rewr - Water treatment system - Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 - Compressor | model INGERSOLL-RAND 11BAR | 2001 - Boiler | model ATTSU RL-400/12 - Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999

Condition: new, Year of construction: 2026, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Bwsdpjdktnkjfx Al Rjr

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. Bwodpfozrd Ugox Al Ror For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: not inspected (used), Year of construction: 2001, operating hours: 108,293 h, functionality: unexamined, machine/vehicle number: 45069, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling costs are included in the price. Automation is not included in the system. For sale is a used machine from a site closure. Sale is made excluding any warranty for defects. Bsdpfjzrd Tpjx Al Rowr The machine has not been inspected but was operational until the end.

Condition: not inspected (used), Year of construction: 1998, operating hours: 130,240 h, functionality: unexamined, machine/vehicle number: 34477, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, includes handling linear robot A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Bjdszrd Aqspfx Al Rewr

Condition: not inspected (used), Year of construction: 2000, operating hours: 104,771 h, functionality: unexamined, machine/vehicle number: 42221, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Includes linear robot. A used machine from a site closure is being sold. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was operational until the end. Bodpfxszrdl Se Al Rewr

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43222, total height: 2,500 mm, overall weight: 20,000 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end. Bsdpfszrdhyox Al Rowr

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 43225, total length: 5,500 mm, total width: 2,000 mm, overall weight: 6,000 kg, Small handling system installed in the machine. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the very end. Bwjdpezrb Spjfx Al Rsr

Condition: like new (used), Year of construction: 2021, machine/vehicle number: see PDF files, FANUC CRX-10iA/L collaborative robot (cobot) – 10 kg / 1418 mm – 05/2021 – first owner, very low use – incl. vacuum gripper + CE base Description: For sale: FANUC CRX-10iA/L collaborative robot (cobot), build date 05/2021, payload 10 kg and reach 1418 mm. From first owner and hardly used. The robot was purchased for a specific application/project, but the concept did not work as intended; therefore the installation was taken out of service and stored in 2021/2022. Including vacuum gripper beam with multiple suction cups as pictured, mounted on a CE-marked base built by Machinefabriek van de Weert (Helmond, NL). Robot specifications: * Make / model: FANUC CRX-10iA/L * Build date: 05/2021 * Payload: 10 kg * Reach: 1418 mm * Robot weight: 40 kg * Type / part no.: A05B-1702-B202 * Serial no.: R2150086C * Software: standard/basic configuration (no upgrades known) Base / installation (integrator): Bwjdpfozq Tzasx Al Rer * Built by: Machinefabriek van de Weert – Helmond b.v. (CE) * Year of building: 2021 * Power supply: 230V / 50Hz * Compressed air: 6 bar * Base weight: approx. 150 kg Included: * FANUC CRX-10iA/L robot on base * Vacuum gripper / suction cup beam (as shown) * Cabling / pneumatics as installed * Control/electrics integrated in the system / complete as installed Condition: * Very low use, stored since 2021/2022 * Cosmetic dust/storage marks visible (see photos) * Inspection possible at our warehouse Location & delivery: * Location: Son (near Eindhoven), The Netherlands * Loading available Fixed quick-sale price: € 27,500.- excl. VAT, ex works Son (NL) Contact: Walther van Rooij – Machinehandel van Rooij BV (The Netherlands) Mobile/WhatsApp: E-mail:

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, year of last overhaul: 2026, type of input current: three-phase, overall weight: 195 kg, Fat recovery unit Jufeba WW-GW 05 2 rotating baskets for a maximum of 36 pieces each Temperature controller with safety thermostat Steam cover, drip tray with fermentation cart and aluminum tilting trough DGUV V3 electrical safety inspection available only from us Connection 400V, 16A-CEE plug Used unit with warranty Bedpfx Aljzpg I Do Rewr Visit our large showroom!

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 Bedpfjg Rn Iaex Al Rowr TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, pipe diameter (max.): 30 mm, input voltage: 400 V, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, HUVEMA MIP30 Profile bending machine, pipe bending machine 30mm ct2437 For sale in excellent condition HUVEMA MIP30 profile bending machine, pipe bending machine Manufacturer: HUVEMA MIP 30 Type: MIP 30 Year of manufacture: 2013 Rollers: 2 driven Upper roller up-down movement manually Max. shaft diameter: 30 mm Working speed: 4 m/min Bending capacity: - Flat steel: 50 x 10 mm - Square 35 mm - Closed section: 40x 40 mm - Pipe 48 x 3 mm Power: 400 V / 0.75 kW 50Hz Electric foot switch, with emergency stop Bsdpfx Alszq Sqto Rjwr Standard bending set Weight: approx. 200 kg Dimensions: W 650 x H 1350 x D:580 mm

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table by Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With this press, you can, with some limitations, do without a hydraulic veneer press. New heat-resistant silicone membrane, extremely stretchable and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or mineral materials. Frame internal dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, which means the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel casters, lockable Frame easily folds open, secured with two latches Double frame for quick replacement of the membrane. A new silicone membrane is currently installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up The silicone membrane and the base plate have been replaced, the machine is ready for immediate use. Bodpfx Aljy Hl Hpj Rewr Dimensions approx. 3100 x 1550 x 1020mm (L x W x H). Weight approx. 550kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: used, mileage: 176,747 km, power: 235 kW (319.51 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, RIO Box, LGS IV, EBA 2, ASR, ESS, MAN BrakeMatic, MAN Tronic, ASR, disc brakes, trailing axle steered/liftable, 3-seater, ASR, radio MAN Media Advanced Navi 7" incl. SD card, BTFSE for 2 telephones, Aux/USB, MAN CameraView pre-loaded HS Olympus 23 m³ suitable for household waste and bulky waste, with Terberg Terberg Omni-DEKA automatic, comb tipping device for 60-1100 l containers. Comfort gearshift, central lubrication system, automatic lock Bedetu R T Ropfx Al Rswr

Condition: used, Year of construction: 2013, Edge Profile Grinder Bwodpfx Aljzpamme Rer With Fanuc robot Teach pendant and controller Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: excellent (used), Year of manufacture: 2004 Comprises: Bwjdpfx Ajygkw Ejl Ror 4 punching units and a forming line with 20 roll-forming stations, including welding and punching.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: E-008281, There are 7 transport trolleys for sale. Price per unit. Load capacity: 500 kg. Bwedpfozqu S Tex Al Rsr

Condition: used, Year of construction: 2019, machine/vehicle number: T17157, functionality: fully functional, operating hours: 32,000 h, input voltage: 40,000 V, input current: 4,000 A, input frequency: 10,600 Hz, type of input current: three-phase, oil tank capacity: 300 l, total length: 42,400 mm, total width: 11,200 mm, total height: 5,100 mm, overall weight: 107,250 kg, year of last overhaul: 2026, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, FOR SALE – BYSTRONIC FL400 TUBE & PROFILE LASER CUTTING SYSTEM High-Performance Laser Cutting Machine for Tubes, Profiles and Structural Sections As part of a strategic investment and the acquisition of a new MAZAK FG-400 NEO tube laser system, we offer for sale our Bystronic FL400 laser cutting machine. The machine has been operating in a professional steel service center and remains in daily production use. It is offered for sale due to replacement with a new system. _____ General Information: Machine: Bystronic FL400 Year of Manufacture: 2019 Installation & First Commissioning: October 2019 Current Location: Mikołów, Poland Condition: Fully operational and currently in production _____ Technical Specifications: Laser Source • CO₂ Laser Source • FANUC Resonator • Laser Power: 4,000 W Loading & Unloading Capacities • Maximum Loading Length: 14,000 mm • Maximum Unloading Length: 12,500 mm • Maximum Material Weight: 140 kg/m Round Tubes • Minimum Diameter: 40 mm • Maximum Diameter: 406.4 mm Square Profiles • Minimum Dimension: 40 mm • Maximum Dimension: 300 mm Rectangular Profiles • Maximum Section: 300 × 200 mm Structural Sections • HEA / HEB: 100 – 280 mm • IPE: 80 – 360 mm • UPN / UPE: 40 – 240 mm • Angle Sections (L): 40 – 280 mm Maximum Material Thickness • Mild Steel: 20 mm • Stainless Steel: 8 mm • Aluminum: 6 mm Bjdpfxozqudpo Al Rewr Operating Status • Resonator Operating Hours: approximately 32,000 h • Machine remains in regular production operation _____ Additional Information The machine has been operated in a professional Steel Service Center specializing in the processing of steel tubes, profiles, and structural sections. The equipment is available for inspection under power at our facility in Poland. Photographs, sample production parts, and videos of the machine in operation are available upon request. _____ Documentation and Technical Details Detailed technical specifications, machine documentation, maintenance records, and additional operating information will be provided to qualified buyers upon request. Disassembly, packaging, and transport of the machine are the responsibility of the buyer.

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion • Weed removal and surface cleaning ahead of maintenance • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: Bsdpfx Aox U Ayvsl Rswr HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Condition: used, functionality: unexamined, If you need more details, feel free to write. Bsdpfx Ajwp Dfcjl Rowr

Condition: excellent (used), Year of construction: 2001, Engel ES 500/110 HL Clamping force: 110 tonnes Year of manufacture: 2001 Screw diameter: 45 mm Injection volume: 318 cm³ Enlarged clamping platen Bwsdpfx Alsxu Rlde Rer Platen dimensions: 730x600 mm

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Bwodpfjx Sx R Sjx Al Rjr Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.