Profiling line

OLMA

Condition: used, HF Tube mill LT76, made by OLMA (ITALY) and TLM (SPAIN) Manufacturers : - TUBE MILL : OLMA (Italy) / TLM (Spain) - HF WELDER : GH ELIN (Spain) - ZINC SPRAYING UNIT : METALLISATION Including tooling for : 20 / 25 / 28 / 30 / 32 / 35 / 38 / 40 / 42 / 45 / 48 / 50 / 52 / 55 / 60 / 65 / 77 mm & Turk heads for squares and rectangular shapes Ljdpfx Ajyl Ukaec Ijab Round tube diameter: 20 - 76 mm Square tube diameter: 20×20 – 60×60 mm Rectangular tube diameter: 20×10 – 100×20 mm Tube thickness: 0,9 - 2,5 mm Tube length: 4 - 8 m Speed: Up to 40 m/min

Condition: new, Year of construction: 2026, Build your production facility for the best ergonomics, efficiency and profitability. A sheet metal decoiler will allow your business to save money, reduce waste within your shop and help free up storage space. We have the right solution whether your sheet metal workshop is big or small. CIDAN Machinery has a wide range of decoilers that can be combined to make an efficient production facility based on your requirements – where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. Lodomfn Icopfx Ac Ijab Using a sheet metal decoiler from CIDAN Machinery: - is very efficient - reduces waste - is ergonomic - saves money.

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. Laedpfx Acjx Sx R Ss Ieb If you have further questions, we will be happy to answer them.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Laedpfx Acsu Ey D Se Iob Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most advanced Demaq SPL machine. 2 units available.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Laedjuzv Tzjpfx Ac Ijb Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: LU0183, Roll forming line for solar profiles, both for trackers and fixed structures. High processing speed, with mechanical press and 10 CNC-controlled punching tools. Working speed up to 30 m/min. Working thickness from 0.8 to 3.0 mm and maximum strip width 450 mm. Lasdpfxewxfbwe Ac Iob

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Ledpfxstgvgpo Ac Ijab Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: used, Year of construction: 1997, EUROMAC CX 1000 PRESSURE 30t Lodsncdvbspfx Ac Ieab TABLE DIMENSIONS: 1000χ2000mm MULTITOOL 6 POSITIONS DIAMETER Φ24 SHEET METAL THICKNESS 6MM IN TOP CONDITION WITH EXTRA TOOLS MADE IN ITALY