Used Bongard Four Omega for sale (2,806)

Condition: good (used), Year of construction: 2002, Weinig Unimat 23 EL four side planer - machine in stock - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers Nsdpfshhyr Aox Ab Ajdc - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication - length of the top 1980 mm Machine dimensions: - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm Ndjdpfjglwmgox Ab Aec -Dimensions: see photo techn. drawing -Price/sale: only complete -Dimensions: 200/90/H55 mm -Total weight: 4.1 kg

Condition: used, Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Njdpfjq Tvqkex Ab Ajdc -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Condition: excellent (used), Guilliet KXR four-sided planer Working width 220mm Working height 120mm Number of spindles 6 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 5.5kw Bottom 5.5kw Universal 5.5kw Feed rate adjustable on variator 6-27m/min Feed motor 2.2kw Feed on cardan shafts Pneumatic stops Worktop lubrication Nsdon Tph Eepfx Ab Asdc

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2006, operating hours: 6,326 h, load capacity: 5,000 kg, lifting height: 5,000 mm, load center: 900 mm, mast type: simplex, construction height: 3,920 mm, remaining battery capacity: 100 %, battery voltage: 80 V, fork length: 1,800 mm, Equipment: UVV, full service history, lighting, pallet forks, The unit has been completely overhauled technically, including a new battery (2026) and a matching charger. Radar arm length: 1800mm, wide fork carrier, fork adjustment. The Hubtex MQ50 has been newly certified according to UVV regulations. For transport, the mast would need to be dismantled. Ndodpfxsv Ubapo Ab Ajc

Condition: excellent (used), max planing width 770mm Nsdpfov H U Nbox Ab Aedc max planing height 200mm additional 5 spindle 220mm

Condition: like new (used), Year of construction: 1991, functionality: fully functional, Weinig PROFIMAT 22N four-sided planer – after technical inspection – very good condition – technical documentation TECHNICAL SPECIFICATIONS: Nodpethfh Eofx Ab Aedc planing width 220 mm planing height 120 mm spindle diameter 40 mm bottom head 4 kW right head left head 11 kW top head 5.5 kW bottom head 4 kW feed motor 2.2 kW feed speed 6-22 m/min four upper steel feed rollers one upper rubber feed roller feed via cardan shafts pneumatic pressure electric height adjustment length of the infeed table 2485 mm machine dimensions (L/W/H) 400 / 180 / 170 cm weight ~ 1800 kg

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment Nodpfoibq Niex Ab Ajdc TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm Nedpfxsdz U Sye Ab Asdc -Weight: 9 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 113680, functionality: limited functionality, working width: 230 mm, spindle diameter: 40 mm, spindle speed (max.): 6,000 rpm, working height: 120 mm, TECHNICAL DETAILS Ndedpfezrmptsx Ab Asc Working width: 20–230 mm Working height: 8–120 mm Infeed table length: 1,950 mm Feed rate: 6–12 m/min Number of spindles: 5 Spindle diameter: 40 mm Spindle speed: 6,000 rpm Max. tool diameter vertical spindle: 232 mm Max. tool diameter horizontal spindle (except for the first spindle): 200 mm Spindle arrangement and power 1. Spindle, bottom: 5.5 kW 2. Spindle, left: 7.5 kW 3. Spindle, right: 7.5 kW 4. Spindle, top: 11 kW 5. Spindle, bottom: 5.5 kW MACHINE DETAILS Connection voltage: 400 V Connection power: 32 kW Fuse rating: 64 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,400 x 1,350 mm Weight: 2,500 kg EQUIPMENT 5-spindle version Four-sided machining Infeed table CE marking Note: The 5th spindle is defective.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, planing width: 230 mm, rotational speed (max.): 6,000 rpm, spindle diameter: 40 mm, planing height: 150 mm, roller diameter: 140 mm, Note: The year of manufacture of the machine has been updated. TECHNICAL DETAILS Planing width min.: 15 mm Planing width max.: 230 mm Planing height min.: 10 mm Planing height max.: 150 mm Number of spindles: 6 pcs. Spindle diameter: 40 mm Planing shaft speed: 6,000 rpm Infeed table length: 1,570 mm Feed Conveyor motor power: 5.5 kW Conveyor drive: Cardan drive Feed system: automatic Feed speed min.: 6 m/min Feed speed max.: 24 m/min Feed speed control: stepped Diameter of dust extraction nozzle: 120 mm MACHINE DETAILS Motor power: 7.5 kW Nsdpjzrmupefx Ab Aedc Dimensions & Weight Dimensions (L x W x H): 5,900 x 2,600 x 1,900 mm Unladen weight: 6,500 kg Note: The gas springs are weak.

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Nedpfjiivc Dsx Ab Ajdc Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Ndjdpfx Abjiivgrs Ajc Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Nsdpsnvfdbofx Ab Aodc

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Ndedpfjy Uiyvex Ab Aoc Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 261 h, load capacity: 1,200 kg, lifting height: 1,462 mm, fuel type: electric, mast type: simplex, construction height: 1,940 mm, fork length: 1,150 mm, drive type: Elektro, Four-way side loader Mast type: Mono Condition: Ready for use and fully functional Ndedpszz Ty Rofx Ab Aoc Technical condition: good Initial lift height.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Nedpfxsy Thfhs Ab Aodc -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H47 mm -Total weight: 1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Ndjdpfx Aboy Thg Ej Aoc -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm Ndsdpfx Absy R R I Ts Asc -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Condition: used, Year of construction: 1996, functionality: fully functional, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, height adjustment type: electric, type of input current: three-phase, input voltage: 400 V, table length: 1,970 mm, number of spindles: 5, extraction connection diameter: 140 mm, Equipment: cabin, - German-made - grooved table - year of manufacture: 1996 - feed rollers integrated in the table TECHNICAL SPECIFICATIONS: - planing width: 230 mm Ndjdpfx Abey Hq Hne Asc - planing height: 160 mm - grooved table - spindle diameter: 40 mm 1st lower spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th lower spindle: 7.5 kW - feed speed continuously variable: 6-36 m/min - feed motor power: 5.5 kW - six upper steel feed rollers - two upper rubber feed rollers - three feed rollers integrated into the table - pneumatic feed pressure - pneumatic shoe pressure - spindles with brakes - infeed table length: 1970 mm - electric height adjustment - central lubrication (split) - extraction port diameter: 140 mm Machine dimensions: - (length / width / height): 410x200x180 cm - weight approx. 3000 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard Ndedpfszfh Auox Ab Asc -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 125/105/H65 mm -Total weight: 4.0 kg

Condition: used, functionality: fully functional, machine/vehicle number: BME8879, Year of construction: 2020, operating hours: 3,880 h, load capacity: 2,500 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,350 mm, fork length: 800 mm, empty load weight: 4,970 kg, total length: 3,000 mm, drive type: Elektro, construction width: 1,500 mm, Four-way side loader Chassis number: BME8879 Fork width: 125 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid tires Front tire size: 2 x 343x135 Front tire condition: 40 - 60% Rear tire type: Solid tires Njdpfszhyqpjx Ab Aodc Rear tire size: 4 x 250 x 80 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2020 Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container stackers, reach stackers, forklifts & terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-purchase, and financing at fair terms are always possible for us. We would also be happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way, our specialist forklift workshop is specialized in the repair and maintenance of large equipment from 8 tons upwards. We would also be happy to offer your vehicle for sale on consignment.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector Njdszwf Ekopfx Ab Asdc year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: used, Technical specifications: Max. planing width: 240 mm Max. planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle arrangement: bottom: 5.5 kW right/left: 7.5 kW top: 5.5 kW top: 5.5 kW bottom: 5.5 kW universal: 5.5 kW Spindles 1/4/5/6 are on separate motors Spindles 2/3 are on one motor Ndjdpfx Aoycu R Iob Aoc Grooved tables Grooved rollers in the table: 2 Top steel feed rollers: 5 Top rubber feed rollers: 3 Dust extraction port diameter: 6 x 140 mm Infinitely variable feed rate adjustment Feed via cardan shafts Table lubrication pump 2 smooth rollers in the table Pressure: 6 atm. Electric lifting of the machine body Power supply: 400 V Total power: 46 kW Overall dimensions: Length: 4600 mm Width: 2000 mm Height: 1800 mm

Condition: new, neu ca. 4 Monate ab Auftragse Italien 103500 € 1956.15 € 150 to 500 mm 1250x1000 mm 600 mm 23 mm/s 4 mm/s 5.5 kW 1520 mm 1270 mm 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Ndodpfx Asynm Icob Aec Pressur switch € on Request