Used Amersham Pharma 35L Bpg Chromatography Column for sale (5,134)

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Lhjdpfjuddcgjx Ab Aon Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW weight of the machine ca. 8,5 t dimensions of the machine ca. m Lhjdot Hwuijpfx Ab Aen

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Lodpfx Abopwgr He Ashn Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Number of strokes per minute: min./max.: 250 strokes/min. Ram stroke - max.: 20 mm Lodpefim Dwefx Ab Ashn Usable table area: WxL: 440 x 360 mm

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Lhsdozn H Rvopfx Ab Asn Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Lsdpfx Aboyrc Ake Ashn Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Lhjdpfx Aoz Ari Teb Ajn Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: good (used), Year of construction: 1990, Power: 1.000 kN Size of bolster: 800 x 750 mm Distance betw. columns: 900mm Size of ram: 800 x 600mm Daylight: max. 800 mm Stroke: 480 mm Speed: Fast down: 300 mm/s Working: 30 mm/s Fast up: 300 mm/s Electric power total: app. 31 kW Weight: app. 13.000 kg Ledez Atv Ijpfx Ab Aehn Size of footprint: app. 1,6 x 2,90 x 3,8m (T x B x H) • die cushion, activ, 400kN, stroke 200mm • allowed for 2-hand working • equipped by oil - air chiller • ram guiding by 4 pc. hard chromed Guiding columns

Condition: good (used), functionality: fully functional, machine/vehicle number: WSM00000005286279, empty load weight: 8,943 kg, maximum load weight: 27,057 kg, overall weight: 36,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2022, next inspection (TÜV): 05/2027, loading space length: 13,300 mm, loading space width: 2,490 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R 22.5, color: white, Year of construction: 2022, operating hours: 1,966 h, Equipment: ABS, cooling unit, our vehicle number #30930 3 Schmitz axles Tire size 385/65 R 22.5 Permissible total weight 36,000 kg Payload 27,057 kg Ledpsz Diavjfx Ab Ajhn Unladen weight 8,943 kg Body dimensions (internal): L: 13,300 mm W: 2,490 mm H: 2,640 mm V: 87 m³ Color: white Double-decker Refrigeration unit S.CU V2.0 with 1,966 diesel operating hours and 293 electric operating hours Lift axle Pallet box Portal doors Disc brakes Pharmaceutical version Diesel/electric refrigeration Multifunction floor V7 Temperature recorder 3 air ducts Simple external twist locks Flower rack Raise/lower function Jost kingpin Forklift accessible Interior lighting Load securing certificate EN 12642 XL ABS/EBS Lift odometer with approximately 214,267 km Fire extinguisher box Air Duo + Standard Financing available upon request!!!

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Lhjdpfxjzvnfds Ab Aon Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: good (used), Year of construction: 1987, machine/vehicle number: 640, Offer 26231 Technical specifications: - Drilling capacity in steel St 60: 45 mm - Drilling capacity in steel St 60: 55 mm - Drill spindle mounting: long spindle, MK 4 - Drill spindle speeds: infinitely variable in 2 speed ranges via AZ gearbox - 40 - 760 rpm - Drill spindle stroke: 140 mm - Overhang: 300 mm - Column diameter: 145 mm - Table with 2 T-slots: 460 x 420 mm - Distance table-drill spindle min / max: 35 / 640 mm - Distance drill spindle – processed base plate: approx. 1150 mm Lodpfx Abszwm Uyo Ashn - 3 feed rates: 0.10 - 0.20 mm/rev - Drive: 400 V / 1.8 / 2.9 kW - Quick-change drill chuck - Machine vise - Space required: approx. W 600 x H 1800 x D 950 mm - Weight: approx. 380 kg

Condition: new, Year of construction: 2026, Threading device Quick-release threading device Programmable drilling depth stop Drilling depth and speed display - digital Threading device M30 (dependent on pitch) Opt. R1: Spindle speeds with gearbox, continuously variable, speed range 100-2000 rpm Ljdpfx Abed H Rh Rj Ajhn Opt. R2: Spindle speeds with gearbox, continuously variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Overhang 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-changing 1.5/3.0 kW Weight 420 kg Option: Drilling kit No. 6: Tapered arbor B18/MK 4, quick-change drill chuck B18/3-16 mm, machine vise No. 2-140 and T-slot screws, EUR 910.00 Option: Automatic spindle stop when drilling spindle is at the top, EUR 432.00 Option: Chip breaker module, EUR 432.00 Delivery: Free to your doorstep including packaging (only Germany) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity Lhjdpfx Abjd Su Age Aon - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical protection - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drilling cross with push button Ledpfx Ajfmh Tljb Ajhn - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/Normal drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Thread cutting capacity max.: R1= M24x3, R2= M20x2.5, R3= M30x3.5 Spindle MK III Drilling depth: 125 mm Overhang: 300 mm Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Optionally R1 or R2 without extra charge Extra charge for R3: € 1,700,- Accessories: Coolant system (€ 620,-) - Separate container - Filling volume: max. 15 l - Delivery rate max. 13.4 l/min Accessories: Drilling package 5 (€ 875,-) - Vise [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Quick-change drill chuck B18 3-16 mm (Accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door incl. packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, Continuous/Normal drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (dependent on pitch) M12 Spindle MK II Spindle speed (stepless): 40-4000 rpm Drilling depth (mm) 100 Overhang (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), spacing (mm), width dimension (mm) Number 2, 125, 13/26 Speed display Digital Drilling depth display Digital Drilling depth stop: quick-adjusting stop ring Feed (mm/revolution) Manual Table height adjustment with rack and pinion Motor, three-phase 400V with frequency inverter (kW) 1.5 Distance spindle/work surface (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drilling head cover with ergonomically angled front LED lighting Quick-adjusting and ergonomic drilling depth stop Stepless speed control via central rotary knob Lsdpfxeir Ir Ts Ab Aehn EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electrical fuse Connection cable with CEE plug Optional accessories Drilling set 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Tapered arbor MK 2 B18 and reducing sleeve MK 2 to Mk 1 €485.00 3-year warranty for single-shift operation Delivery free to your door (only Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots Lhodpfxoq U Swgo Ab Ajn - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: ready for operation (used), Year of construction: 1996, Travel X/Y/Z: 740mm/500mm/480mm, tool holder: SK40, tool positions: 22, max. spindle speed: 4700rpm, control: Heidenhain TNC 426 PA. Machine dimensions: approx. 3000mm/2400mm/2700mm, weight: approx. 5000kg. The machine was used exclusively for machining plastic and operated without metalworking fluid. The coolant system must be repaired. The backup battery of the control is depleted and must be replaced. Inspection possible by arrangement. Lhsdpfx Aozukt Ujb Aon

Year of construction: 2000, condition: ready for operation (used), Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible. Lhsdjymfdaepfx Ab Asn

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Lhedpfx Aevyirkjb Aon

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Lhjdpfx Aslc N R Deb Aon

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm Lsdpexabrrefx Ab Ashn

Condition: new, Year of construction: 2025, L-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ). The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 35 cycles/minute; packing sizes: (L + H) = 600mm provided that H < 180mm and (W + H) = 500mm provided that H < 180mm; length of sealing blades: horizontal = 703mm, vertical = 550mm; power: 220V/3.2kW; machine dimensions: L2015xW1470xH1300mm; weight: 850kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Lhedpfx Ajv Nl Awob Ajn

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Ledeygx D Hopfx Ab Aohn Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: new, neu ca. 4 Monate ab Auftragse Italien 43200 € 825.12 € 150 to 500 mm 800x600 mm Ledpfxeynnfcj Ab Aehn 630 mm 22 mm/s 3 mm/s 4 kW 1800 mm 1200 mm 2400 mm 4500 kg 2 speeds adjustable max. pressure manomete

Condition: good (used), Year of construction: 1970, pressure 80 t Lhodpfxovwgqrs Ab Aon passage width 350 mm stroke 600 mm table dimension - longitudinal 400 mm dimensions of the machine ca. 1400 x 1050 x 2350 m