Used Stama Mc 526 for sale (1,856)

Year of construction: 2020, condition: like new (used), functionality: fully functional, As-new MC Cafe Kuchem display case, dessert showcase with several refrigerated drawers and cooling areas for sale. Absolute top model. New price €18,500 net. Djdeyrp S Sepfx Al Ajwc

Condition: ready for operation (used), Year of construction: 1999, Vertical machining center / EUMACH MC 1050 P - Heidenhain 426 -CE marking -Heidenhain 426 control system -Oil cooler -COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTOS -Complete documentation Dwjdpszmqigefx Al Aec Dimensions: L x W x H 2.8 x 3.45 x 2.8 meters / Weight: 6500 kg Errors and omissions excepted.

Year of construction: 2018, condition: ready for operation (used), A Hyundai Wia CNC turning center is offered. Max. turning diameter: 560mm, swing diameter over bed: 780mm, swing diameter over slide: 535mm, max. turning length: 1180mm, chuck diameter: 381mm, main spindle bore: 130mm, max. bar capacity: 117mm, max. spindle speed: 2000rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3073Nm/2490Nm, turret: 12, tool interface: BMT-75, live tools: max. 4000rpm, 7.5kW/5.5kW, X/Z travel: 320mm/1200mm, rapid traverse X: 20m/min, rapid traverse Z: 25m/min, coolant tank capacity: 300l, control: FANUC Series 32i-B, control ON: approx. 10574h, operating time: approx. 5606h, cutting time: approx. 4876h, total parts count: 30968, weight: approx. 11t. Equipment: C-axis, live tools, automatic tool measurement in the working area, programmable tailstock with MT5 quill, high-pressure through-tool coolant (20bar), hydraulic 15-inch power chuck, Manual Guide i, electronic handwheel, tool load monitoring (HWTM), central lubrication and hinge belt chip conveyor. Documentation available. Inspection by appointment possible. Dwsdpfoznmx Tsx Al Aoc

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Dwodpfoytrd Tsx Al Ajc

Year of construction: 1997, condition: used, A compact CNC lathe is offered. Control: Siemens. Condition: defective. Turret enable signal is missing. Inspection possible by appointment. Dwsdpfx Aloz Hzd Ej Asc

Condition: used, total length: 6,650 mm, Year of construction: 2020, load capacity: 11,000 kg, - Wenderadius: 3.610 mm - Auslegerwinkel: -10° bis 60° - Rahmen: Konstruiert und gebaut von JMG. Das Gehäuse ist stabil gegenüber. Torsion auf Grund des verwendeten, hochfesten Stahls. - Antrieb: elektrisch, batteriebetrieben - Getriebe: Vorderachsantrieb mit Vorgelege - Ausleger: Gefertigt aus Formteilen und verschweißten Qualitätsstahlplatten. Hydraulisches Grund- und zwei teleskopierbare, proportional ausfahrende Mastelement Dwsdpfx Aoz N In Rol Aoc - Bremsen: Betriebsbremse: über hydraulisches Pedal betätigt. Feststell- und Notfallbremse: hydraulisch mit automatischer Steuerung - Lenkung: über das Hinterrad, mit von der Kranhydraulik versorgten Motor mit Servolenkung und Lastfühler - Hydraulikanlage: - Angetrieben durch Zahnradpumpe - Hydraulikbedienung über elektro-proportionalen Verteiler, betätigt durch einen Joystick - Filter und - Sicherheitsventile - Maximaler Betriebsdruck 220 bar - Sicherheitseinrichtungen: elektronische Lastbegrenzung - Fahrerkabine - Arbeitsscheinwerfer - Warnlicht - Feuerlöscher - Sicherheitsabschalter

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Djdpfxexzq Ncs Al Aewc Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: ready for operation (used), Year of construction: 2004, Double sided edgebander manufactured in 2004. This HOMAG OPTIMAT KFR 526/10/A3/35 features a robust design suitable for various applications. It operates at a voltage of 400 V and has a load capacity of 250 A. If you are looking to get high-quality edgebanding capabilities, consider the HOMAG OPTIMAT KFR 526/10/A3/35 machine we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Phase: 3~+N- Control Voltage: 24 V- Nominal Current: 190 A - Main Fuse: 250 A Dwjdpfjz Ah Ixex Al Aoc

Condition: excellent (used), Year of construction: 2019, operating hours: 100 h, Automatic wheel banding machine. Djdpfszhtb Isx Al Aewc

Condition: excellent (used), Year of construction: 2021, 4-SIDE EDGE BANDING LINE Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: O12044a) Infeed table "HOMAG" Mod. TBL 100/25/12 with motorized rollers Dwodpfx Alox Aqbhs Asc O12044b) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) O12044d) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC-Steuerung Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Dwsdpfxszx Nxqj Al Aec Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,055 h, functionality: fully functional, power: 35.3 kW (47.99 HP), fuel type: diesel, color: orange, fuel: diesel, gearing type: hydrostat, Equipment: soot filter, KÄRCHER MC130 Equipment carrier / vacuum sweeper with 2-brush sweeping system This KÄRCHER MC-130 was first put into operation in 2019 and has only 1,405 sweeping hours and 2,055 total operating hours according to the meter. The machine is in good overall condition with the usual signs of wear and tear for this type of equipment and has just undergone a minor service; it is ready for immediate use. Net price: €32,900 // Gross price: €39,151 - Inspection / test drive is possible Dedpfxez Ny R Dj Al Aowc - Shipping can be arranged nationwide; costs depend on the distance - Financing / leasing can be arranged individually for you

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Dwodpfx Aloxqh I Io Aec Year of manufacture: 2001 Operating hours: 70,000 h Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: excellent (used), SPINNER TC52-MC CNC turning machine with bar feeder Year of manufacture: 2004 Control system: Siemens 810 D ShopTurn Turning diameter: 280 mm Turning length: 550 mm Tool holder: VDI 30 Spindle speed max.: 5,000 rpm Tool turret positions: 12 Speed of driven tool: 6,000 rpm Torque of driven tools: 23.5 Nm Rapid traverse X/Z: 15 / 24 m/min Bar diameter: 52 mm Dsdpozw Avyefx Al Aewc

Condition: ready for operation (used), Year of construction: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture 1985, weight 8 tons. Control system Mazatrol T3, with three-jaw chuck, tool turret, tailstock. Ready for use, can be viewed while still powered. Dwedpjvzgyhofx Al Aec

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm Dwjdpfxezrwy Ae Al Asc L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics Dwodpfjx Hn D Rjx Al Asc The machine can be viewed under power by appointment.

Condition: used, Year of construction: 2016, Equipment: all wheel drive, This machine has just arrived at our facility: Liebherr wheel loader L 526 Z 2 plus 1? In good condition? Excellent features? Looks like new!! Liebherr service maintained? Service history stored on the Liebherr central computer! All major services performed by Liebherr. VIN: VATZ1558PZB0444200 Dodjz A Nqrepfx Al Aowc Year of manufacture: 2016 First put into service: 2017 Operating hours: Original 10,566 hours, verifiable! Liebherr 4-cylinder in-line engine, water-cooled with turbocharging and charge air cooling, 136 hp, emission stage TIR IV (Note: Brochure = TIR V!!!) Hydrostatic drive with 3 driving ranges, driving speeds: Range 1: 0 - 6.0 km/h, Range A1-2: 0 - 16.0 km/h, Range A1-3: 0 - 20.0 (40) km/h (currently limited to 20 km/h!) * Standard Z-linkage * Quick coupler with hydraulic attachment kit, 3rd hydraulic circuit for tipping/grabbing/or 4/1 bucket with multi-quick coupler, towing hitch at the rear, ride vibration damper, linkage vibration damper, automatic central lubrication system - factory installed by Liebherr, air conditioning, automatic climate control - automatically maintains temperature, step for easier cleaning of the windshield, steel lamp mounts instead of plastic, folding and heated exterior mirrors, tilting window on the left/driver's door, premium display with touchscreen, driver's seat "Comfort" with pneumatic suspension, seat heating and headrest, Comfort radio with hands-free system, 2 work spotlights on the cab roof at the rear (LED), 2 work spotlights on the cab roof at the front (LED), fuel filter with pre-filter, air intake with pre-separator - TopAir, reversing fan for blowing out the radiator, interior mirror, adjustable steering column, pre-installation for rotating beacon - flashing light, folding upper section of the cab in the center, rear view monitoring with camera - monitor in the display, crane/tie-down eyes at the rear and front, protective ventilation system. Tires 17.5 x 25 L3, front: 2 x 60% Tires 17.5 x 25 L3, rear: 2 x 60% Offer with quick coupler and bucket - at a price of €62,900.00 net. Additional equipment available at an extra cost: * Tipping bucket from 2.5 to 4 cubic meters from €4,950.00 * Bucket with bottom holder for quick coupler from 3.5 cubic meters €3,660.00 * 4-in-1 bucket 2 cubic meters, upon request. * Pallet fork 5 tons from €1,850.00 If desired, also available with a used scale! Pfreundt WK 60 (calibratable) - €5,900.00 Printer for the scale, price upon request. Prices net + VAT or for export. Note: The brochure only approximately corresponds to the offered machine!!! (Brochure is for machines from the year of manufacture 2019 onwards with engine emission class V) Sale only to business customers or for export. Sale in the condition as is. No guarantee or warranty. The specified mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of these figures! Subject to prior sale. The vehicle description does not constitute a binding offer and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics.

Condition: used, Year of construction: 1998, stations 16 max. speed sets 3500 /h max. paper size 32 x 47 cm stiching folding unit SPF-10 II Trimmer FC-10 II Dedpfxozvq D Nj Al Aswc

Year of construction: 2019, condition: used, General Information The MobyLift is a practical tool for ergonomically lifting, transporting, and positioning products such as doors, table tops, and other panels. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, and prevents back problems, thereby reducing work-related absences. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our expertise to create a practical tool. Dwedjv Dauwopfx Al Aec The MobyLift MC-120-H consists of the following modules: - Mobile base frame - Electric lifting and tilting system - Automatically operating vacuum unit - Wireless electric control The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into several portable modules after it is switched off. This makes it very convenient to load and unload the MobyLift or move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator, which allows the battery status to be continuously monitored. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to back: 37°, electrically operated - Swivel angle - head joint on both sides: 90° - Rotation angle - head joint: 360° continuous - Lateral displacement: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim

Condition: used, Year of construction: 2005, General Information: - Model: ROBODRILL α-T2 STAMA - Serial Number: 046VH155 - Year of Manufacture: 2005 - CNC Controller: FANUC (Model A04B-0094-B111#BD) - Weight: 2200 kg - Power Supply: 200 V, 50/60 Hz, Three-phase - Power Consumption: 10 kVA ----- Machining Capabilities: - Operations: - Milling (high-speed and high-precision milling) - Drilling - Rigid tapping ----- Axis Travel: - X-axis Travel: ~500 mm - Y-axis Travel: ~400 mm - Z-axis Travel: ~330 mm ----- Spindle: - Spindle Taper: BT30 - Standard Spindle Speed: up to 10,000 rpm ----- Tool Changer: - Type: Automatic tool changer - Tool Change Time: ~1.6 seconds ----- Rapid Traverse Rate: - Rapid Traverse Speed: 54 m/min on X, Y, and Z axes ----- Dwsdpfeuru I Rsx Al Aec Key Features: - Compact structure for high rigidity - High productivity with ultra-fast drilling and tapping cycles - Easy maintenance (integrated FANUC diagnostic interface) - Compatibility with automated production cells (co-branding with STAMA)

Condition: good (used), Year of construction: 2006, Turning center SPINNER TC32-MC, control system SIEMENS Sinumerik, hydraulic bar feeder LNS Super Hydrobar, purchased in 2006. Dodpfx Ajztc Hqjl Aowc

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t Djdpfx Alsvu E R Sj Ajwc The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Dodpozvni Aofx Al Aewc Video of machine in operation available

Year of construction: 2021, condition: used, Multi-blade saw CAN CUT MC 930 Year of manufacture: 2021 Technical specifications Cutting width: 1,100 mm Max. cutting height: 50 mm Min. workpiece length: 650 mm Feed rate: 5-20 m/min Feed motor: 0.75 kW, 1,410 rpm Max. power consumption: 22 kW, 380 V Motor power: 30 hp Max. saw blade diameter: 250 mm Saw arbor diameter: 70 mm Saw blade speed: 3,500 rpm Max. number of saw blades: 15 pieces Dwedpezu St Asfx Al Aoc Working height: 900 mm Sound pressure level: 80 dB Automatic transport rollers: 3 pieces Rubber rollers between the saw blades to reduce vibrations when cutting MDF boards and wood.