Used Sat Multi-Chamber Furnace for sale (8,631)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website: -ge.de. The following is an excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading area length, approximately 3,700 mm long, with a rear slope of approximately 1,000 mm x 6° * For semi-trailer tractors: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * Grated steel flooring with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approximately 500 mm wide * Round NATO socket on the connection bar at the front (Maeler & Kaege VG 96 917) * 1 pair of plug-in aluminum side panels on the gooseneck, approximately 400 mm high, with an anodized finish * 1 LED work light each on the left and right sides at the top of the front wall, operated via an on/off switch (operating the work lights from the semi-trailer tractor is not possible in this case) LOADING AREA: * Loading area, approximately 9,600 mm long, with a rear slope of approximately 900 mm x 6° * Loading area behind the gooseneck can be hydraulically raised and lowered, approximately 3,000 mm long, with a load capacity of up to approximately 9,000 kg * Continuous grated steel flooring with approximately 5 mm sheet metal backing as additional reinforcement on the lifting platform and the loading area, designed for point loads TIRES: * 235/75 R 17.5 3PMSF, twin tires. Brand of our choice * TPMS tire pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse locking function, activated via reverse gear and manually * 1st axle with starting assist * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve HYDRAULIC LOADING RAMPS: * 1 pair of two-piece AXS steel ramps with grated steel flooring, approximately 4,920 mm long and approximately 900 mm wide * Hydraulically folding ramp tips * Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp operation controls * Ramp locking in the driving position by means of a quick-release mechanism * Painted sandblasted coating on the outer frame of the ramp and on the ramp tip * Mechanical supports in drop-pipe design on the sides of the ramps for support when connecting to loading docks * Operating valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM: * WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection PAINTING: * Trailer: Carmine Red (RAL 3002) * Rims: Silver Gray Prjdpfxey Auhhe Ahcoa * Side panels: Aluminum, natural finish * Wheel hubs: According to axle manufacturer * Lamp housing: Pure White (RAL 9010) EQUIPMENT: * Steel front wall, plug-in, approximately 1,600 mm high, including a connection bar for supply lines to the semi-trailer tractor, mounted approximately 1,000 mm from the bottom edge of the outer frame profile * Attachment option for lashing chains on the inside left and right sides of the front wall, including aluminum trays underneath on the left and right sides for storing chains or tension straps * Appro

Condition: excellent (used), functionality: fully functional, load capacity: 25,000 kg, Equipment: UVV, - Towing capacity: maximum 25,000 kg - Bed size: 1,955 x 1,170 (1,120 at the rear) - Bed height: 1,000 mm - Drive: 2 x 10 kW electric motor, 80 V / 930 Ah - Features: optimal maneuverability, robust and reliable Prjdpfx Ahozmttbjcea

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Podpfx Aey R Tdwehcsra

Condition: used, Floor cleaners, floor preparation products, floor coating Prodpfx Aheqyi Unocsa -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Condition: good (used), mobile welding fume filters, welding fume extraction -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h Pjdpfeb A Ng Iex Ahcsra -Quantity: 1 available -Weight: 20 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, We are offering this well-maintained Multi Weigh, Delta Pack MKW: HDW10 3.5 pouch filling machine: DE420 FU multi-head weigher with pouch filling machine, manufactured in 2004. Prjdjzlnbwjpfx Ahcoa Manufacturer: Multi Weigh, Delta Pack Model: MKW: HDW10 3.5 pouch filling machine: DE420 FU Year of manufacture: 2004 Condition: good Category ID: 703 Type: Multi-head weigher with pouch filling machine If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Max temperature: 700 C ° Pedsd Sm Diopfx Ahcera

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, 1 FOUR-TUNNEL DRYING / DEBURRING / COOLING SYSTEM Brand: SAT - Automatic conveyor for trays holding your parts o Tray dimensions: L = 475, W = 325, H = 210 o Payload: 80 kg o Maximum temperature: 150 °C o Electric heating o Ventilation o Heating length: 2620 mm (width 550, height 300) o Dwell time: 1 hour (adjustable) o Inlet and outlet airlocks on the oven A Attached: - Drawing - Description - Photos (more available upon request) Inspection possible in working condition in Northern Switzerland, near Lausanne. Podpfx Aezkt Ugohcora

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Pjdpfx Ahszc Iztecjra Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Predpfx Ajzc Izgohcja Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Psdpfx Ahezc Iypscsra Total length:3100mm Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Pjdpfx Aezg Iw Iohcjra Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: used, functionality: fully functional, Simatic Multi Panel Podpowg Tmdsfx Ahcera Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: used, functionality: fully functional, In this offer you purchase a used Multi Purpose Stacker "Plockmatic MPS" Object of sale: 1 x Plockmatic MPS Type F139-101 Fits other Plockmatic finishing machines Fits various Canon / Ricoh machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Psdpfx Ajwnqp Eohcjra Seaworthy packaging and worldwide shipping are available on request! For further information you can of course also contact us personally.

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Platform size 7100 x 2500 mm Inspection valid 11.2025 Length:7100mm Width:2500mm Height:900mm Podpfx Ahowq N Sdecsra

Condition: excellent (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Heavy Duty industrial trailer Multi-Trans - ARL-4PA Platform height: 900mm Pedoxzz E Uepfx Ahcjra Platform length: 7000mm Platform width: 2400mm Max. loading capacity:40000T Number of axes: 2 Number of wheels: 8 Length: 7000mm Width: 2400mm Height: 900mm Weight: 120000kg

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: Pedpfsq Nd Rbox Ahcsra - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: ready for operation (used), functionality: fully functional, The MPFSH-075-01 Multi-Fill dosing machine is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruit, surimi, chilled salads, and even cooked meats. Indeed, this machine stands out for its ability to precisely dose difficult-to-handle products while ensuring uniform distribution in different types of containers. Furthermore, the machine is designed to operate efficiently, with optimized air and water consumption, reducing operating costs while ensuring consistent performance. Furthermore, its integration into a production line improves productivity and guarantees high-quality results. Furthermore, this robust machine is suitable for demanding industrial environments, offering a durable solution for the needs of the food industry. In short, the MPFSH-075-01 Multi-Fill dosing machine is essential equipment for companies looking to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical Specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of Manufacture of this Multi-Fill Filling Machine: 2006 Air Consumption: 60 CPM > 80 PSI / 30-35 Cubic Feet/min / 5.5 Bar / 51-60 Nm/hour Water Consumption: 0.75 – 1 Gal/min / 2.8 – 3.8 Liters/min Total Required Frequency with Air Vacuum = 0.45 kW Products Filled: Cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats. Pjdpfswf D Rwox Ahcera HTwLg8C1

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° Pedjy Auh Ispfx Ahcjra * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Prodpfoxrr Uhjx Ahcja Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements Prjdpfx Ahjxarmaecsa * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high Psdpfx Ahsrgzv Nocera * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Pedpfx Aeh Rkhnohcsra Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: new, empty load weight: 970 kg, maximum load weight: 1,630 kg, overall weight: 2,600 kg, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, tire size: 185/65R14, 2 horse trailer from ChevalLiberte model MULTIMAX. Large tack room with exterior and interior door, aluminum walls and aluminum floor combined in a rot-proof aluminum horse trailer. Prjdpfxsrxu S Rj Ahcja Aluminum horse transporter for up to two horses with excellent driving characteristics thanks to the Pullman2 chassis! The comfort chassis of the aluminum horse trailer is an in-house development by Cheval Liberte. With an access height of 45 cm, independent suspension, trailing arms, coil springs and shock absorbers, the ride comfort is second to none. Safe loading of horses through a flat ramp flap, which can also be set up as a door, reduces the risk of injury when loading and unloading. In addition, pallets can be loaded easily and the trailer is easier to clean thanks to the flap/door system. The two-horse trailer is equipped with a folding partition wall, tack room, poly hood available in various colors, aluminum walls, aluminum floor, access door, flap and door system, Pullman chassis-2, 100km/h, interior light, automatic support wheel, sliding window, spare wheel, stable frame and V-drawbar. Horse trailer accessories such as external tethering bracket, feed bucket, drawbar cover, anti-theft device and scratch mats are also available. The body is splash-proof.

Condition: like new (used), total length: 4,000 mm, total width: 2,500 mm, total height: 665 mm, color: blue, Operating conditions: The trailer is designed for use on level, paved surfaces in internal company transport. The trailer components are not designed for combined operation with multiple trailers in a train. Payload: 10 t at 6 km/h with evenly distributed load (surface load) on the loading area between the axles. Point or strip loads are only permissible upon prior notification. Loading area: Dimensions approx. 4000×2500 mm, loading height approx. 665 mm, loading surface covered with softwood planks, all-round edge protection. Main frame: Robust welded construction made of profile steel sections. Podjxrtqwepfx Ahcera Steering: Four-wheel kingpin steering, drawbar can be raised, removed, and swapped from front to rear. Coupling height at towing vehicle approx. 350–600 mm (other coupling heights only permissible upon prior notification), towing eye according to DIN 74054, Ø 40 mm, drawbar drop guard according to accident prevention regulations (UVV). Running gear: Both axles steered, super-elastic tyres 21×8-9 (approx. 517×186 mm), wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Topcoat RAL 5002 ultramarine blue