Used Clever & Co Card Gluer for sale (28,509)

Year of construction: 2023, operating hours: 100 h, condition: good (used), functionality: fully functional, Water treatment system for compounding and extrusion plants For sale is a complete industrial water treatment system for supplying a compounding or extrusion plant with softened and fully demineralized process water. The system consists of pre-filtration, a dual softening unit, a reverse osmosis unit, a 3,000-liter permeate tank, and a frequency-controlled dual booster pump unit. The system is particularly suitable for closed-loop cooling water circuits and for applications where a consistently high water quality and a reliable supply to the production plant are required. System configuration Pre-filtration and protection Backwash filter for mechanical impurities Flow rate: 7.5 m³/h at a pressure drop of 0.5 bar Automatic, time-controlled backwash System separator with a KVS value of 12 m³/h Rcedpozt Sb Djfx Ahcjf Connection size: R 1" Pressure regulator with a DIN flow rate of 5.3 m³/h Safety module Connection block with integrated bypass and sampling valve Flexible pressure hoses, length 1,000 mm, Rp 1", up to 10 bar Dual softening unit Dual softening unit for continuous operation Nominal flow rate: 2.9 m³/h Capacity: 200 m³ × °dH each Resin disinfection system Salt deficiency switch with potential-free alarm or low-level signal Sampling group with pressure gauge and sampling valve Hardness control unit for wall mounting Installation fitting for 1" pipe Due to the dual design, one softening column can be regenerated while the second column continues to supply softened water. Reverse osmosis unit Reverse osmosis unit with vertically arranged high-performance modules, permeate recirculation, and automatic concentrate flushing. Technical data: Permeate flow rate at 15 °C: approx. 450 l/h Recovery rate: approx. 75 % Salt rejection rate: approx. 98.5 % Required inlet pressure: 2–6 bar Feed water connection: DN 25 Permeate connection: DN 20 Concentrate connection: DN 15 Supply voltage: 3 × 400 V / 50 Hz Dimensions: approx. 1,800 × 610 × 810 mm (H × W × D) Permeate tank Black PE storage tank Capacity: 3,000 liters With level control and various connections Dimensions: approx. 1,750 × 995 × 2,450 mm (H × W × D) Dual booster pump unit Pre-assembled and electrically wired booster pump unit on a stainless steel frame, ready for connection. Equipped with two pumps and integrated frequency converters for constant and demand-based pressure supply. Technical data: Nominal flow rate per pump: 2.0 m³/h Nominal head: 43.6 m Flow rate with one pump: approx. 0.6–3.0 m³/h Flow rate with two pumps: approx. 1.2–6.0 m³/h Delivery pressure at maximum flow rate: approx. 2.5 bar Zero flow head: approx. 6.7 bar Factory-set constant pressure: 4.0 bar Pre-pressure of the diaphragm expansion tank: 3.5 bar Measuring range of the pressure sensors: 0–10 bar Diaphragm expansion tank: 8 liters Permissible water temperature: 1–30 °C Permissible ambient temperature: 1–40 °C Suction connection: DN 65 / PN 10, loose flange Pressure connection: 50-mm socket Supply voltage: 3 × 380–500 V Motor power: 2 × 1.1 kW Nominal current per pump: 2.2–1.9 A Dimensions: approx. 950 × 700 × 858 mm Dry weight: approx. 55 kg Technical specifications based on available documentation. Subject to prior sale and errors. An inspection of the system is possible by prior arrangement.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Rjdjzt Nbzepfx Ahcscf Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Quantity available: 3 identical machines available New Price: New price €94,000 per unit Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Redpfex Ihufjx Ahcjcf Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately

Condition: excellent (used), functionality: fully functional, DESTACO pneumatic clamp Recommended for welding jigs and series production. DESTACO 82M-3E series with integrated 8EA-146-4 position sensor module (open/power/close feedback, 10–30VDC, 150mA). DESTACO 82M-3E030063L8 – stronger, 63mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G 1/4 Rcsdpszt Dm Esfx Ahcof Quantity: 28 pcs. DESTACO 82M-3E030050L8 – 50mm cylinder. Clamping angle: 5–135°. Max. pressure: 6 bar. Sensor: 8EA-146-4 PNP, max. 30VDC, M12 connector. Port: G ¼ Quantity: 8 pcs.

Condition: used, Year of construction: 2022, operating hours: 10 h, functionality: fully functional, machine/vehicle number: NS-009-50Hz-11kN-300, type of input current: AC, nominal power at 50% duty cycle: 160 kVA, throat depth: 300 mm, short-circuit current: 25,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 15 V, Zens Multifunction Spot Welding Machine 160 kVA – 50 Hz – 11 kN – Year of Manufacture 2022 For sale is a Zens multifunction spot welding machine in a robust industrial design. The machine is designed as a 50 Hz alternating current system and is suitable for various spot welding applications. The machine features an integrated seam welding adapter. The corresponding seam welding heads are not included in the scope of delivery and can be purchased separately. Thanks to the modular design of the machine, it is possible to use different welding tools and applications. Technical Data Manufacturer: Zens Model: NS-009 Machine Designation: Multifunction Spot Welding Machine Year of Manufacture: 2022 Rsdeztn Sxopfx Ahcecf Welding Technology: Alternating Current (AC), 50 Hz Welding Power: 160 kVA Duty Cycle: 50% Max. Welding Force: 11 kN Welding Control: SER PLC Control: Siemens CE Safety: 2-Hand Control Seam Welding Adapter: Integrated Equipment Zens Multifunction Spot Welding Machine 50 Hz Alternating Current Technology Integrated Seam Welding Adapter SER Welding Control Siemens PLC Control Device Carrier System with Touchscreen 2-Hand Control as CE Safety Device Modular Machine Design Robust Industrial Design Available Separately The seam welding heads are not included in the machine's selling price and can be purchased separately. The "On Top" water cooling unit is also not included in the machine's selling price and can be purchased separately. The machine is in good condition and can be inspected and demonstrated by appointment. Note: Seam welding heads and the "On Top" water cooling unit are available separately and are not part of the machine offer. Subject to technical changes and errors.

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Rcjdpfx Ahetdgkxjcof Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Rcedpfx Ajwh Rp Eshcjf Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: Rcjdpfx Ajw E H E Rohcef - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Rsdpewg Sgcofx Ahcscf

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 0013, type of input current: three-phase, input voltage: 380 V, working height: 1,000 mm, total width: 885 mm, total length: 930 mm, total height: 1,630 mm, overall weight: 545 kg, insertion depth: 380 mm, Huen Chen HC-13TR4E Quadruple Automatic Riveting/Eyeleting Machine Heavy-duty automatic quadruple eyeleting machine, designed for the production of lever arch files and binders. The machine sets four eyelets/rivets simultaneously in one working cycle. The material is positioned manually against the adjustable guides. Operation is activated by two microswitches on the working table, so no foot pedal is required. Pre-punching of the material is not necessary. The machine punches and sets the eyelets in one operation. Technical details: * Manufacturer: Huen Chen Enterprise Co. Ltd., Taiwan * Model: HC-13TR4E * Year: 1993 * Quadruple eyeleting/riveting system * Fixed spindle / eyelet spacing * Throat depth: 380 mm * Working height: approx. 1,000 mm * Motor: 1 HP * Power supply: 380 V, 3-phase, 50 Hz * Machine dimensions: approx. 930 × 885 × 1,630 mm * Net weight: approx. 545 kg * Intermittent motor operation * Two-microswitch workpiece activation The machine is complete with the installed tooling and a quantity of matching eyelets/rivets as shown in the photographs. Redpex Nfhlofx Ahcecf The machine is in good used and fully functional condition and can be inspected while running at our warehouse in Son en Breugel, the Netherlands. IMPORTANTLY; this model is still part of Huen Chen's current product lineup!

Year of construction: 2023, condition: excellent (used), For sale: Friul Co C3 Dough Mixer and Kneader – 2023 model, like new We are selling a Friul Co C3 industrial dough mixer and kneader in excellent technical and cosmetic condition. This machine is ideal for bakeries, pizzerias, pasta factories, and artisanal bakeries where fast, consistent, and reliable dough processing is essential. Technical specifications: Manufacturer: Friul Co Srl (Italy) Model: C3 Year of manufacture: 2023 Power supply: 230 V Power: 1840 W Single-phase version IP54 protection Stainless steel construction Movable, lockable wheels Key benefits: ✅ Mixing and kneading in one machine ✅ Consistent dough processing, excellent end result ✅ Easy to operate and clean ✅ Robust, industrial design Rcodpfx Ahszrnd Ejcof ✅ Reliable Italian manufacturing ✅ 2023 model, modern design The machine is perfectly suited for processing bread, pastry, pizza, and other yeast-leavened doughs. The automatic operation significantly reduces the need for manual labor and increases productivity. The machine is in like-new condition (approximately 5 hours of use). For more information or to schedule an appointment, please do not hesitate to contact us!

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, load capacity: 8,000 kg, lifting height: 7,000 mm, battery voltage: 380 V, DGUV certified until: 06/2030, overall weight: 10,000 kg, total height: 9,900 mm, Equipment: CE marking, For sale: a two-rail gantry crane, manufactured in 2025 and with only 5 months of service. In impeccable condition, fully operational, and available for viewing in operation before purchase. Redpfx Aezrmigohcjcf Key features: Capacity: 8 tons using two independent 4-ton hoists on the main beam Span: 8 m Lifting height: 7 m Overhangs: 1.75 m on each side Overall height: 9.9 m Equipment weight: approx. 10 tons Power supply: 380 V three-phase Travel speed: 20 m/min Manufacturer: Henan Dafang Heavy Machine Co., MHE series Includes: electrical panel, cable reels, control unit, and access ladder Complete documentation: EUROCERT certificates No. 10.16.2627 (gantry crane) and No. 10.16.2628 (electric hoist) in accordance with Machinery Directive 2006/42/EC, valid until 2030, plus manufacturing drawings and declaration of conformity. The dual hoist configuration allows for synchronized handling of long loads, making it ideal for handling pipes and drilling columns, stone processing, precast concrete, and metal structure workshops. Located in Malaga. For sale due to the cessation of the activity for which it was acquired. Price: €26,000 (excluding VAT). Option to sell with dismantling and loading handled by the buyer. Operational video available upon request. If you have any questions or need more information, please do not hesitate to send us a message or call us.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10044/0218, !!! Detailní fotografie a produktové specifikace soutruhu TLI 10 naleznete v PDF souboru v příloze. !!! !!! TLI 10 SLOUŽÍ PRO OBRÁBĚNÍ VNITŘNÍCH A BOČNÍCH ČÁSTÍ PRSTENŮ !!! pro vnější obrobení nutno zakoupit stoj TL0 10, který nenabízíme Soustruhy jsou speciálně navrženy pro zpracování snubních prstenů a náramků. Oddělení vnitřního obrábění (TLI 10) a vnějšího obrábění (TL0 10) na dva stroje zajišťuje vysokou produktivitu. Veškeré potřebné soustružnické operace (rovinné obrábění, rádiusy, boční obrábění a srážení hran) lze provádět postupně bez nutnosti úprav nebo přestavby strojů. Technické parametry: TLI 10 Parametr Hodnota Pohon 0,55 kW s elektrickou brzdou Rcedpfx Ahsy S Sz Recof Napájení 380 V / 50 Hz Regulace otáček potenciometr Rozsah otáček 0–1400 ot./min Rozměry 100 × 70 × 130 cm Hmotnost 170–190 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: Rcodpfxjznwu Se Ahcof - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: repair required (used), Year of construction: 2008, Manufacturer: BECS Master Chiyoda Kogyo Co Tip: HWP 501 Rjdpfxerigais Ahcocf Year of manufacture: 2007 Max. Tube size 19 mm (1.5 mm wall thickness) The device is currently not working. PLC error

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Rcedpfx Aezqucfshcef Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: excellent (used), George Nutting Co. INC Tablet De-Duster Rsdpfxozp Hmyj Ahcecf

Condition: good (used), Strati Anden 660A Folder Gluer The machine is in very good condition, recently inspected, regularly serviced, and maintained. This single-point machine includes a right and left gluer. Year of manufacture: 2015 Width: 660mm Maximum speed: 180m/min Maximum paper weight: 600gsm Power: 4.5kW Power supply: 230V Rsdpfxjzlah Ns Ahcscf External dimensions: 750x105cm Weight: 1800kg Includes a set of documents and a pallet of small parts.

Condition: used, Year of construction: 2019, Overview This Clever Machines S.r.l. GS 307 is a rotary shrink-sleeve label applicator, built in 2019 and supplied as a complete line together with an STJ3 steam shrink tunnel. It applies partial or full-body shrink-sleeve labels to PET bottles. A single-head sleeve feeding and cutting unit sits over a rotary star-wheel carousel, with the steam-powered STJ3 tunnel shrinking the sleeves downstream. The control system is a modern Allen-Bradley / Rockwell architecture (PowerFlex 525 drives, Kinetix 5500 servo drives and an Allen-Bradley PLC). The line is set up for 500, 1,000 and 1,500 ml PET formats. Technical data - Manufacturer: Clever Machines S.r.l. - Model: GS 307 (line: GS 307 applicator + STJ3 steam shrink tunnel) - Year of manufacture: 2019 - Machine type: rotary shrink-sleeve label applicator with steam shrink tunnel - Applicator: single-head sleeve feeding and cutting system - Capacity: 12,000 containers/h (manufacturer-rated per OEM technical data); seller reports production speeds up to 15,000 bph - Bottle formats: 500 / 1,000 / 1,500 ml PET - Bottle diameter: up to 120 mm - Sleeve-label height: 40 - 350 mm - Application: partial or full-body sleeve labels - Control: Allen-Bradley / Rockwell (PowerFlex 525 drives, Kinetix 5500 servos, PLC) - Power supply: 400 V, 50 Hz, 3-phase; approx. 10 kW installed; 20 A; Icc 10 kA; IP 55 - Compressed air: 6 bar min, approx. 150 l/min (approx. 70 m³/h) Rsdpfx Ahezk U E Tececf - Working height: 1,300 mm - Weight: approx. 1,800 kg Equipment - Clever GS 307 single-head sleeve label applicator - STJ3 steam shrink tunnel - Format / change parts for 500 / 1,000 / 1,500 ml PET bottles - OEM technical documentation Condition Used. Photographs show a clean, well-maintained stainless-steel machine with modern controls and normal signs of production use. The seller reports the machine as being in excellent condition with approximately 3,000 operating hours, dismantled and stored following the end of its private-label production. Availability Immediately available. Location: Italy. The machine is dismantled and stored, ready for loading; preparation, dismantling and truck loading by the seller (EXW loaded). Inspection on request.

Condition: used, Nut - Perforiermaschine / Creasing - Perforation machine W. Kroll & Co. Redpfx Ajyua Sujhcocf Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. The unit is ideally suited for workshops for the extraction of chips and dust (e.g., in metal or wood processing). Technical specifications Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amperes): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more items—both new and used—in our shop! Rsdpoznibwsfx Ahcecf International shipping costs available upon request!

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1250 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Redpowq I U Rofx Ahcscf Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Rsdpfx Aexxxqvehcecf Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: used, Year of construction: 2011, Hesse & Co MS 2504 - Electric Panel Shear Rcodpfx Aozi A Ruohcef - Electric back gauge, 750 mm - Manual shear gap adjustment - 1 set of replacement blades - Operating manual - Year of manufacture: 2011 Technical data - Cutting capacity: 4 mm - Cutting length: 2550 mm - Cutting angle: 1° 30' - Strokes per minute: 42 - Table width: 450 mm - Table height: 800 mm - Back gauge (max. length): 750 / 100 mm - Motor power: 7.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): 3050 x 1330 x 2260 mm - Weight: 3300 kg

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Rsdpfxszmul Se Ahcjcf Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.