Used Super Condor Vertical Drill for sale (12,327)

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Dkodpfjzg Hicox Ab Top Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: good (used), Nagel Citoborma 280B Paper Drill Dedpfx Abezdazhs Tekp This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Nagel Citoborma 180 Paper Drill with Pedestal The machine is in 100% working order. Very good condition. Solid construction – weighs approximately 100 kg. This is one of the newest Citoborma drill models. 230V power supply. One drilling head. Drill diameter: 2-20 mm. Stack height: 60 mm. Dkjdpfx Abezdawvj Tjp The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. In addition, the drill has an automatic table lock that releases after each cycle. The set includes drill bits, tools, a new cutting stick, and instructions.

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: Dedozccb Ujpfx Ab Tskp 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 04x workbench crossbeams, new Djdpfshq Txhsx Ab Tokp Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new for fastening the worktop 08x locking hooks, new Material color: fully galvanized

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x Workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, foot plates The frames are pre-assembled (bolted framework) 888 mm high 700 mm deep 04x Workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black Dksdpfx Aohq Twysb Tep 03x Steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x Angle set, new for mounting the worktop 08x Locking hooks, new Material color: fully galvanized

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Dksdpfx Abjhq Txwe Tjp Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, footplates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new for attaching the worktop 04x locking hooks, new Material color: fully galvanized

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approximately 3-4 weeks Technical specifications of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x workbench stands, new Material color: fully galvanized Stand type: TS4 including cross and diagonal braces, foot plates The stands are pre-assembled (bolted framework) 888 mm high Dodehq Tqdepfx Ab Tekp 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x angle set, new for fastening the worktop 04x locking hooks, new Material color: fully galvanized

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Dkedpfx Aoy D I I Rjb Top Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: good (used), Used Comi Cóndor HX / GMP 316L stainless steel Atex-rated horizontal centrifugal peeler. The unit features a perforated basket with a diameter of 1150mm. Maximum load 280kg, maximum cake capacity 222 litres. Internal design pressure rated at +0.5/-0.5 bar at 50°C. The unit is equipped with main drive, hydraulic powerpack, mounting springs and two control cabinets. Material: Stainless steel 316/316L Technical features Dkedpfxeynb Nuo Ab Top Model: HX/GMP Maximum load (density 1.25 kg/dm³): 280 kg Condition: As is Manufactured by: COMI-CONDOR

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm Dksdpfx Absxc I Dgo Top VMC 1890 table 2000x900 mm

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Dkedsyt Spcepfx Ab Tsp

Year of construction: 2002, condition: used, functionality: fully functional, Machine for cutting aluminium and copper pipes with the option for pipe end processing. Dodpfx Abeyt Sppe Tekp

Condition: like new (used), Year of construction: 2026, operating hours: 72 h, functionality: fully functional, machine/vehicle number: MT100SP, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Super Precision Hard Turning Lathe Dkedpfx Aevl S Dysb Tep Auto Matic loading and unloading and measurement options High precision accuracy 0.0001mm Hydrostatic technology Spindle runout 0.15μm X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Dkodpfxjyug R Ro Ab Tep The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) Dedpfx Abeyug Hxs Tskp "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Dkjdpsyplqrefx Ab Tjp Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet Djdpshr Rp Sjfx Ab Tskp lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: good (used), functionality: fully functional, Super Soco TC Electric Motorbike With increased battery charge time, increased speed and increased range, the TC is a fantastic all-rounder electric motorbike with the looks and practicalities to deliver. Capable of 28mph with a 45 mile range, the Super Soco TC is well suited to become your daily inter city commute. The battery easily removes to be charged at work or at home over a 6 hour period. With no gearing thanks to the electric motor, this automatic "twist and go" bike is extremely easy to ride. Djdjv U El Nopfx Ab Tekp A large display gives excellent visibility of speed, range, battery levels and driving mode at a glance without compromising on retro looks. The 3000W Bosch motor gives smooth acceleration up to 28mph in luxurious silence. Keyless, the TC has been designed to protect against theft. Starting the bike is the push of a button. A lightweight frame makes handling not only easy, but extremely good fun. Powerful front LED lights offer illumination for both you and other road uses. Hydraulic double piston brakes give safety and control in all conditions. Good working condition. Please check out our other listings as well

Condition: used, usedmanufactured by Gannertype Superdrillnumber of spindles 19 piecespindle distance / grid 32 mmhydraulic feeder brakeguide fences 2 piece length ca. 3,0 m / 1,5 mworking width 640 mmdrilling depth 95 mm / 110 mmdrill chuck D 10 mmpendulum fence 6 piececlamp 3 piecedrilling unitframe dowel unitrequired space ca. 1400 mm x 900 mm x 1200 mmtotal connected power 1,5 kWlocated in 97447 Gerolzhofen, free on truck, unpackedsale in current condition as seen,without revisionwithout guarantee and warranty Dkedjvwf R Ropfx Ab Tep

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Spindle operating hours: 14,000 h Dkjdpfxjzhn Ayo Ab Tsp Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Swinging operation, mountable wall Handwheel Measuring probe Tool changer

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Dodpfozdttpsx Ab Tekp EQUIPMENT Tool changer

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 3,000 rpm, controller model: DIXI CNC 4400, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,000 mm Travel range, Z-axis: 1,000 mm Vertical movement with pallet changer (Y-axis): 880 mm Distance from spindle axis to top of table: 0 – 1,000 mm Distance from spindle axis to top of table with changer: 0 – 880 mm Table dimensions without changer: 840 x 1,000 mm Table dimensions with standard changer: 800 x 800 mm Max. table load: 2,000 kg Max. table load with pallet changer: 1,200 kg Table rotation: 360° continuous Rapid traverse: 1,500°/min T-slots: 7 equally spaced slots, width 18 H7 Tool interface: ISO 50 Spindle speeds: 8 – 3,000 rpm (in 3 ranges) Drive power: 11 kW Drive power with overload: 13.75 kW Max. torque: 200 kpm Working feed rates (X, Y, Z): 1 – 9,999 mm/min Rapid traverse (X, Y, Z): 9,999 mm/min Measuring system resolution: +/- 0.001 mm / 0.001° Positioning accuracy: 0.001 mm / 0.001° Distance from table axis to spindle flange: 390 mm to 1,390 mm MACHINE DETAILS Control system: DIXI CNC 4400 Installed total power: 47 kW Dkodozd Rizjpfx Ab Tjp Compressed air requirement: 6 kg/cm² Dimensions & Weight Dimensions (L x W x H): 4,835 x 4,160 x 3,190 mm Machine weight: approx. 17 t Compressed air requirement: 6 kg/cm²

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Dodpfx Abozf Ibdj Tokp MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,831 h, functionality: fully functional, machine/vehicle number: 15465588584, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller model: Heidenhain iTNC 530 HSCI, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 400 mm Travel range, Y-axis: 400 mm Travel range, Z-axis: 375 mm B-axis: -5 to +110 degrees C-axis: 360 degrees Table dimensions: 450 x 400 mm Maximum workpiece weight: 250 kg Spindle speed: 18,000 rpm Tool interface: HSK-A63 Dedpezgt U Esfx Ab Tekp Number of tool positions: 60 Rapid traverse rate: 80 m/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Machine weight (approx.): 7,150 kg Operating hours Spindle hours: 23,831 h Power-on hours: 57,330 h EQUIPMENT Band filter system NC rotary table Handwheel FS Coolant gun Tool measurement system Chip conveyor Rotoclear viewing window Temperature monitoring