Used Kuper Fw 630 Mini for sale (4,407)

Condition: like new (used), Thread splicer with glue Zigzag stitching Gjdpey N N Nyefx Angsuh Heater with air blowing Pedal control 380V power supply

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Gsdjxgqmxepfx Angeuh Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: good (used), functionality: fully functional, with heating wire, outreach 920 mm, material 0.4-2 mm, feed rate approx. 15 m/min, required space 1400 x 600 x 1600 mm, weight approx. 350 kg in good condition Gsdoyayzajpfx Angjuh Price ex works Transport possible at extra cost!

Condition: like new (used), Year of construction: 2021, number of spindles: 5, Technical Specifications Four-sided planer KUPER SWT XL-5 Manufacturer: KUPER – Heinrich KUPER GmbH, Germany Model: SWT XL-5 Gusdpfez N Apiex Angoh Year of manufacture: 2021 Supply voltage: 400 V Frequency: 50 Hz Power supply: three-phase Rated current: 63.1 A Electrical diagram number: K810-03146 Intended use: planing and profiling of solid wood components, including boards, strips, and other profiled elements. Technical condition: like new, requires minor refurbishment. It has only produced approximately 100 m3 of paneling profiles. I also have a cutting/end-trimming machine listed in another offer.

Condition: excellent (used), functionality: fully functional, FWJ900 Veneer Gluing Machine with glue thread, well-maintained condition. Maximum veneer thickness 2 mm, minimum 0.4 mm. Operated via foot pedal. Floor-standing model, feed speed 7 mm, throat depth 900 mm. Weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm. Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers. Gusdpfx Anevkfncegoh

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Guedpjvwfaxofx Angjh

Condition: ready for operation (used), Kuper FWJ900 With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Guodpfx Anovrk Siogjh Stand model, feed speed 7 mm, Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Godpfx Aez Ixliengsuh Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: used, Year of construction: 2006, total width: 2,000 mm, total height: 1,800 mm, Colour: Grey Empty weight: 4.000 kg Dimensions (LxBxH): 490 x 200 x 180 cm Four-sided planer Little Kuper SWT 23 XL-6 Year of construction 2006 min/max Working height 8/125 mm min/max Working width18/230 mm Working speed 6/28 m/min Spindle speed 6000 rpm Spindle diameter 40mm engines 1st. Spindle - under 5.5 kW 2nd Spindle - right 5,5kW 3rd Spindle - left 7.5kW 4th. Spindle - above 11kW 5th. Spindle - above 7.5kW 6th Spindle - under 7.5kW Main fuse 105 amp. Dimensions 7500 x 2000 x 1850 mm (L x W x H), weight 4000 kg - Year: 2006 - Serial number: 2087 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.6 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 160 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.6 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 170 - └ Spindle 3: Godpfx Ansxyvzusgjuh - - Spindle type: Left - - Motor power [kW]: 9.7 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 170 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 15.2 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 160 - └ Spindle 5: - - Spindle type: Top - - Motor power [kW]: 9.7 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 160 - └ Spindle 6: - - Spindle type: Bottom - - Motor power [kW]: 9.7 - - Spindle diameter [mm]: 40 - - Max. planing block diameter [mm]: 170 - Max. planing width [mm]: 230 - Max. planing height [mm]: 160 - Feed table length [mm]: 2250 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 5.6 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Manual - └ Min. feed speed [m/min]: 3 - └ Max. feed speed [m/min]: 20 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 105 - Fuse [A]: 125 - Power [kW]: 72.0 - Transport dimensions: 4900mm x 2000mm x 1800mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, Composition: 6 stations + 1 universal station Electronic speed controller 230mm/150mm Chrome table Gjdpfxez Ihwho Angouh Trainer in the table Lubrication 380 V

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- Gsdpsyyqnlofx Angeuh -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: used, machine/vehicle number: 2880, x-travel:290 mm y-travel:120 mm z-travel:350 mm table surface area:690 x 175 mm spindle taper:SK40 turning speeds steps:17 feed range:42 - 680 mm/min feed steps:14 turning speed range:50 - 2240 U/min weight of the machine ca.:0,6 t with swivelling vertical head +/- 90°, double-pole switchable, reversing spindle drive, vernier hand wheels on all 3 axes plus fast-adjustment on x-axis with capstan, x-axis with electric feed, feed steps adjustment via change gear, upper rail for horizontal milling, triple cam switch on x-axis for running programs, emergency cut-offs on control panel and main switch Gsdpfx Anecxxntegouh

Condition: used, Year of construction: 2024, New: Yes Gedpfx Anoz Rw I Nsgsuh Please contact us for more information.

Condition: like new (used), Year of construction: 2019, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 142400, A powerful and reliable machine for industrial veneer processing. Robust construction, precise operation, and a suitable solution for operations that prioritize efficiency and consistent performance. The CrossRunner 1600/2500 model offers a working width of 1600 mm and a length of 2500 mm. Suitable for professional production and daily operation. Gujdpfx Aozg Dl Ujngoh

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Guodpsxln Iwefx Angsh Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. Guedpjz Dxcmjfx Angoh The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​ Gjdexv A Nqspfx Angjuh

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0509, overall weight: 1,200 kg, number of blades: 28, rotor width: 630 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 18.5 kW Rotor width: 630 mm Number of axles: 1 Number of rotating blades: 28 Screen perforation: 20 mm Hydraulic slide: Yes Opening width: 810 mm Opening length: 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,660 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT Hydraulic slide Gedpfx Ansz Nip Aegouh CE marking

Condition: good (used), Manufacturer: WMW VEB Guedpeik Hcuofx Angoh Type: FW 200×630 x-y-z travel: 380 – 140 – 230 mm Table size: 200x630mm

Condition: used, Year of construction: 2003, machine/vehicle number: 4303/0442, type of input current: three-phase, input voltage: 400 V, empty load weight: 2,000 kg, Equipment: CE marking, For sale The Kuper FLI 1000 (manufactured in 2003) is an industrial veneer joining machine. It is valued in the woodworking industry for its precise and durable edge-to-edge veneer joining using resin adhesive, eliminating the need for glue beads. Key specifications and parameters: - Joining method: Edge-to-edge, using resin adhesive applied to the edges. - Throat depth: 1000 mm. - Veneer thickness: from 0.3 mm to 2.5 mm. - Veneer length: from 500 mm. - Minimum veneer strip width: 45 mm. - Heating system: Provides uniform pressure and rapid adhesive curing while maintaining high efficiency. Gedpfx Anszmtk Tsgouh Required space Length: 2.3 m Required space Width: 2 m Required space Height: 1.5 m

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Gsdpfx Aewgwmhsngouh Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: excellent (used), CATALOGUE NUMBER: 7915 TECHNICAL SPECIFICATIONS: Shaft width: 640mm Number of knives: 4 pcs Maximum thickness of the workpiece: 200mm Guodpjzrltqsfx Angjh – Top: Latches/deflectors Toothed infeed roller, pulling Pressure roller Planing roller Pressure roller Smooth outfeed roller, pulling – Bottom: Adjustable rollers in the lower bed: 2 pcs Motor: 7kW Infinitely variable feed speed control Dimensions (L/W/H): 1800x1250x1150mm Weight: 1250kg ADVANTAGES: – Bulgarian production – Infinitely variable feed speed control – Used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table length: 3,000 mm, table height: 860 mm, input voltage: 400 V, overall weight: 6,100 kg, total length: 3,790 mm, total width: 2,230 mm, total height: 1,860 mm, operating pressure: 315 bar, back gauge: 1,020 mm, oil tank capacity: 100 l, number of support arms: 3, back gauge adjustment: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Amada sheet metal shear GXII 630 The Amada GXII 630 is a series of high-quality, hydraulic CNC sheet metal shears for precise cutting of sheet metal. This machine is in exceptionally good condition and has minimal operating hours. * Automatic adjustment of cutting clearance * Automatic adjustment of cutting angle * Motorized back gauge, CNC controlled * 3 front gauges * Angular front gauge * Safety guard on the rear of the machine * Sheet support system * CE certified Specifications Force (kN) 197 Cutting length (mm) 3050 mm Maximum speed (cuts/min) 33 Material thickness (max.): Steel (mm) 6.35 Stainless steel (mm) 4 Aluminum (mm) 8 Machine dimensions: Length (mm) 3790 Width (mm) 2250 Height (mm) 1866 Weight (kg) 6150 Gedpfxjz Rn Hve Angjuh Machine will be disassembled and loaded.

Condition: used, Year of construction: 2008, Working width: 260 mm Working height: 130 mm Number of working spindles: 5 Spindle arrangement: bottom, right, left, top, bottom Grooved bed: yes Motor power bottom spindle: 5.5 kW Motor power right spindle: 5.5 kW Motor power left spindle: 7.5 kW Gedpfx Ajyhgkdongsuh Motor power top spindle: 7.5 kW Motor power bottom spindle: 7.5 kW Bottom spindle adjustment: handwheel Right spindle adjustment: handwheel Left spindle adjustment: handwheel Top spindle adjustment: handwheel Cutterheads: Centrolock Feed speed: stepless Feed roller pressure: pneumatic Current consumption: 50 A Current consumption: 71.7 A Motor brake: automatic Extraction connection: Machine length: Machine width: Weight: 4500 kg

Condition: used, Year of construction: 2012, Overview  This complete brewhouse was manufactured in 2012 and enables the production of 1,000-liter brews. The system works with steam and includes brewing, fermentation and storage tanks. It is immediately available and is currently installed and ready for operation in the production facility. The seller confirms that the system has worked perfectly until recently. The boilers have a copper coating, while the rest of the system is made of stainless steel. Details - Wort yield: 1,000 liters per brew - Heating system: Steam - Current status: Installed and ready for operation - Availability: Immediately Scope of delivery  - Brewhouse | Mini Brewery System | CI T 10 | 2012 - 2 kettles (mash tun above the whirlpool as one unit + separate boiling kettle) - Steam boiler | Mini Brewery System | - | 2012 (electric) - Plate heat exchanger - Hot water tank | 1,500 L Guodpjv Da Dljfx Angsh - Reverse osmosis system | ALFA | compact model | - - Capacity: 150-200 L/h - 4x Isobaric fermenter | Mini Brewery System | 1,000L | 2012 - 4x Horizontal isobaric maturation tank | DuoTank | 500 L | 2018 - Cooling jacket & bag system for optimum beer preservation