Used Franz Wölfer Odrkf/Odrk/Drk for sale (98)

Condition: good (used), For sale are four propeller agitators DRK64D from Erwin Stelzer Warburg. One propeller blade is slightly bent. Product data: 11kW Hnedpfjfr Iihsx Ak Don 380/660V 25.0/14.5A 1450rpm Shaft length 600mm blade diameter 340mm DN250 0.85 cos IP44 50Hz

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: Hnjdofr Ifdepfx Ak Don 18/4 kW 380V 34,2/10,8 A 980/480 rpm shaft length 780mm blade diameter 420mm 0,92/0,68 cos IP 44 50 Hz Type of operation S1 Insulation class E Nameplate (photo)

Condition: good (used), For sale are three propeller agitators DRK66D from Erwin Stelzer Warburg with emergency stop switch. Product data: Hnjdpfx Aksfr Igue Dsn 8,5kW 380/660V 20,5/11,9A 960UpM Blade diameter 400mm Flange diameter 400mm 0,74 cos Type S1 Isol. Cl. E IP44 50 Hz

Condition: good (used), Three-phase motor, electric motor, agitator, stirring device -Motor: for agitator -Power: 5 kW -Speed: 960 rpm -Hollow shaft: Ø 68 mm Hnjdpfx Aecwuvpok Den -Flange: Ø 360 mm -Protection class: EX -Dimensions: 420/360/H385 mm -Weight: 113 kg

Condition: used, mileage: 20,000 km, power: 353 kW (479.95 HP), first registration: 11/2025, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ Internal number: #568 Mercedes Benz Arocs 2548 6x2 L with KROLL High-Pressure Flushing and Suction Pressure Tank Superstructure ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2548 6x2 L is equipped with a premium KROLL high-pressure flushing and suction pressure tank superstructure of ADR class L4BH. Featuring a telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and full CAN-BUS control, the vehicle delivers maximum performance for sewer, industrial, and hazardous goods operations. Body * KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Sliding piston with 3 locking positions * (3,300l water/10,600l sludge, 5,500l water/8,200l sludge, 7,700l water/6,000l sludge) * Suction from open water possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR – type class AT/FL L4BH * DISCHARGE: via pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for returning dirty water via the boom into the sewer * Manhole DN500 Chassis – Mercedes Benz Arocs 2548 L * 6x2 * Automatic transmission * 480 hp / 350 kW * EURO 6e * Fuel volume approx. 350 l * Cab color MB9147 Arctic White * 2x LED beacon lights on cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch from PTO * Approx. 20 m HP hose DN 125 * HOSE STORAGE CASSETTE WITH TELESCOPIC BOOM DN 125 * Reach on anchoring side: 4,600 mm * Additional suction hose reel with through-suction, rear right, approx. 30 m DN75 suction hose High-pressure system * Uraca KD 718 G60 approx. 315 l/min at 170 bar * Drive: via drive shafts, V-belts, and pneumatically operated friction clutch * Approx. 240 m HP hose DN 25 * Large HP hose reel for 240 m 1" DN 25, 180° swiveling * Fitted with 160 m DN25 (rubber hose) * Small HP hose reel for 60 m ?? DN 13, hydraulic * Fitted with 60 m DN13 (rubber hose) Features of the hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage Hnjdpsx Egyfefx Ak Don * Boom arm for suction hose hydraulically adjustable, telescopic, and swiveling 180° * ADR version L4BH type class FL including EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED perimeter lighting * Remote control of work functions via CAN-BUS technology * Remote control with 14 functions * Hand wash unit (warm) * Rear view camera * Acoustic enclosure in front of pump compartment * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising boards left and right * Scrap box Technical Data GVW 26,000 KG * Unladen weight approx. 18,760 KG * Length approx. 9,280 mm * Height approx. 3,820 mm * Width approx. 2,550 mm * Wheelbase 3,900 mm Conclusion An excellently equipped Mercedes-Benz Arocs 2548 with KROLL combination superstructure, telescopic DN125 boom, VacuStar 1600, Uraca KD718 G60, and ADR L4BH. The ideal solution for sewer service contractors, industry, municipalities, and service providers seeking a powerful, ready-to-use professional vehicle. For further d

Condition: used, mileage: 20,000 km, power: 335 kW (455.47 HP), first registration: 07/2025, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure cleaning and suction-pressure tank superstructure ADR Type K 14.0 / 28 PE Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Telescopic piston with 3 locking positions * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible—"comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * EMPTYING: via pneumatically-actuated piston * SLUDGE WATER DRAIN DN 80: for pushing the dirty water back through the boom into the sewer. Vacuum system CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar Hnjdpfx Akjxc Szis Dsn * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Parallel guidance suction and high-pressure hose via boom * Suction hose reel hydraulic right-side with 30 m DN 75 (can be fully suctioned through) High pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HD hose reel for 240 m 1" DN 25, 180° pivotable * Equipped with 160 m DN25 * Small HD hose reel for 80 m DN 13 hydraulically operated * Equipped with 80 m DN13 Special features hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height of suction hose hydraulically via roller guide carriage * Extension arm for suction hose hydraulically and telescopically extendable and 180° pivotable * ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing unit (heated) * Large cupboard rear left, e.g. for push camera * Reversing camera with 7'' color monitor incl. day/night mode * Noise protection panel in front of pump room * Large tool compartment * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising boards on right and left Special equipment: Chassis cover, axle load measuring system, front axle load 9.0 t, airbag driver's side, 220 Ah battery, battery master switch, standard and DuoMatic brake connectors, interactive multimedia cockpit, air pressure horn, electrical pre-wiring in cab 24V / 100A, driver assist system: high beam assistant and cornering light, driver assist system: traffic sign recognition, suspension: front springs 9.0 t, 4-leaf, tinted windshield with band filter, hazardous goods version ADR type FL, generator 150 A, speed limiter, gearbox 16-speed - type: G 280-16, rear axle crown wheel 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash protection, fuel tank: 330 L aluminum left side, cooling system for hot climates, trailing axle 9 t steered, loadable, liftable, navigation system, PTO - flange splined, PTO gearbox-independent and clutch-dependent MB 1.65, parameterizable special module, chassis lowering without residual air pressure regulation, chassis overhang 1350 mm, smoker's package, rain sensor, tire pressure monitoring system, acoustic reverse warning and warning flash light (external warning signal) For further detailed information and/or images, please contact us directly. You can find a wide selection of more vehicles for SALE or RENT at: Changes, prior sale and

Condition: used, mileage: 50 km, power: 353 kW (479.95 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2025, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Reference: #345 MAN TGS 26.480 6x2-4 BL with Combined High-Pressure Wash and Suction/Pressure Tank Body ADR Type K 14.0 / 28 PE Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach, pivot side: 5,200 mm * Tank Material: S355J2+N (St. 52.3) * ADR Suction/Pressure Tank Vehicle Type K 14.0 / 28 PE * Telescopic piston with 3 locking positions * (3,300l water/10,600l sludge, 5,500l water/8,200l sludge, 7,700l water/6,000l sludge) * Suction from open bodies of water possible ‘comfort edition’ via cassette boom with integrated filter * Tank truck equipment according to ADR – type class AT/FL L4BH * EMPTYING: by a pneumatically operated piston * SLUDGE WATER DRAIN DN 80: to backflush dirty water via the boom into the sewer. * Manhole DN500 Chassis MAN TGS 26.480 * 6x2 – 4BL * TipMatic with OMSI * 470 HP / 346 kW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 Pure White * Cab color RAL 9010 Pure White * 2x LED beacons on cab * Rear view camera * Navigation * Air conditioning Vacuum System * CVS VacuStar 1600 approx. 1,550 m³/h at 400 bar * Drive: elastic, via propeller shafts, V-belts and pneumatically actuated friction clutch from vehicle PTO * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach, pivot side: 5,200 mm High-Pressure System * Uraca KD 718, approx. 315 l/min at 170 bar * Drive: elastic, via propeller shafts, V-belts and pneumatically actuated friction clutch * approx. 240m HD hose DN 25 * Large HD hose reel for 240m 1” DN 25, 180° swiveling * Equipped with 240m DN25 * Small HD hose reel for 80m DN 13, hydraulic * Equipped with 80m DN13 Special Features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable hydraulic height adjustment of suction hose via roller carriage * Boom for suction hose is hydraulic, telescopic, and can swivel 180° Hnodpfx Aoxc Sx Iok Dsn * ADR execution L4BH type class FL incl. EX/II, EX/III, and AT * Spray gun * LED beacons * Removable and swiveling halogen work lights * LED area lighting * Work functions remotely operated via CAN-BUS technology * Remote control with 14 functions * Hand wash unit (warm) * Large rear left cabinet, e.g., for a push camera * Reverse camera with 7” color monitor including day/night mode * Sound insulation in front of pump compartment * WATER SHORTAGE WARNING SYSTEM: with buzzer in main control cabinet and automatic pump shutdown * RESIDUAL WATER DRAINAGE: pneumatically for all water-carrying parts with connection to truck compressed air system * Large equipment box * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising boards left and right * Manhole DN500 Technical Data GVW 26,000 KG * Unladen weight 18,530 KG * Length 9,280 mm * Height 3,740 mm * Width 2,550 mm * Wheelbase 3,900 mm For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for PURCHASE or RENTAL can be found at: . Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our General Terms and Conditions and excludes any liability for warranty.

Condition: good (used), Three-phase motor, electric motor, agitator, mixer Hodpfoc I Ixlex Ak Djnn -Motor for: agitator -Power: 8.5 kW -Speed: 1450 rpm -Hollow shaft: Ø 68 mm -Construction: B5 -Protection class: EX -Dimensions: 425/390/H360 mm -Weight: 116 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer Hedpsqmt A Iefx Ak Donn -Type: RDRK 25KM -Power: 0.63 kVA -Primary: 3x380-400-420V -Secondary: 24V DC -Dimensions: 190/190/H170 mm -Weight: 1.1 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Riedel, three-phase transformer -Type: RDRKL 16 Hnsdpfx Akjg Td D Ro Den -Power: 0.5 kVA -Primary: 3x380 V -Secondary: 24 V -Dimensions: 205/200/H140 mm -Weight: 8.9 kg

Condition: new, mileage: 50 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,820 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #384 Mercedes Benz Arocs 2848 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 Chassis Mercedes Benz Arocs 2848 * 6x2 - 4BL * automatic transmission * 480PS/350KW * EURO 6e * Fuel capacity approx. 350l * Color cab RAL 2004 orange * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE TELESCOPIC BOOM DN 125 * 5,200 mm reach on the stop side * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,820mm Hnsdevh H H Iepfx Ak Don * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale takes place exclusively

Condition: new, mileage: 500 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #549 Mercedes Benz Arocs 2848 6x2 with Combined High-Pressure Jetting and Suction/Pressure ADR Tank Body Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2848 6x2, equipped with a combined KROLL high-pressure jetting and suction/pressure tank body, is a NEW vehicle featuring ADR L4BH, VacuStar 1600, Uraca KD 718, telescopic boom DN125, and a hose cassette. A premium, ready-for-use vehicle for demanding sewer, industrial, and hazardous material applications. Body • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Hose cassette with telescopic boom DN 125 • Reach (pivot side): 5,200 mm • Tank material: S355J2+N (St 52.3) • ADR suction/pressure tank Type K 14.0 / 28 PE • Telescopic piston with 3 locking positions • Capability to suction from open water ("comfort version") via cassette boom with integrated filter • Tanker equipped per ADR – class type AT/FL L4BH • Discharge by pneumatically operated piston • Sludge water drain DN 80 for backflushing via the boom Vacuum system • CVS VacuStar 1600 – approx. 1,550 m³/h at 400 mbar • Hose cassette with telescopic boom DN 125 • Reach (pivot side): 5,200 mm • Additional suction hose reel with through-passage, right rear, approx. 30 m DN80 High-pressure system • Uraca KD 718 – approx. 315 l/min at 170 bar • Large high-pressure hose reel for 240 m DN 25, swivels 180° • Supplied with 160 m DN 25 • Small high-pressure hose reel for 80 m DN 13, hydraulic • Supplied with 80 m DN 13 Special Features • Hose storage cassette with telescopic boom DN 125 • Continuous height adjustment of suction hose (hydraulic, trolley-guided) • Boom arm hydraulic, telescopic, swivels 180° • ADR L4BH, incl. EX/II, EX/III and AT • Spray gun • LED beacon • LED perimeter lighting • Remote-control operation of working functions via CAN-BUS • Radio remote control with 14 functions • Hot water hand-wash unit • Large locker at rear left (e.g., for push camera) • Reversing camera • Soundproofing of the pump compartment • Toolbox • Holder for traffic cones • Vise • Ladder • Advertising boards on both sides approx. 3,000 × 600 mm Special Equipment • Axle load measuring device • Front axle: 9.0 t • Digital radio DAB/DAB+ • ADR equipment package • Right-hand exterior mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V / 100A electrical pre-wiring in cab • Main beam assistant & cornering light • Traffic sign recognition • Movable cab entry • Front springs: 9.0 t / 4 leaf • Tinted windscreen with band filter • ADR Type FL – speed limiter system • 16-speed gearbox G 280-16 • Gearbox lock (independent of gearbox) • Rear axle crown wheel 300 • 3-piece mudguards with splash protection • 430 l aluminum fuel tank (right) • Cooling box / refrigerator Hjdpfx Asxc Sy Ejk Donn • Reinforced engine brake • Tag axle: 9 t, steered, liftable • Navigation system • PTO – smooth flange • PTO gearbox-independent & clutch-dependent MB 1.65 • Programmable special module • Rear overhang 1,650 mm • Smoker package – rain sensor • Tire pressure monitoring system • Reverse warning (audible) & hazard warning lights • Two additional remote keys • Circuit breaker • Comfort suspension seats for driver & co-driver • Armrest

Condition: used, mileage: 22,000 km, power: 353 kW (479.95 HP), first registration: 06/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #348 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 MAN TGS 26.480 chassis * 6x2 - 4BL * TipMatic with OMSI * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box Hnsdpfx Akjx Rv Ras Djn * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods.

Condition: used, functionality: fully functional, Year of construction: 2012, in the following configuration: - GEKA punch holder No. 8-31 and 8-40 with quick-change system - GEKA die holder No. 8 and No. 5 - Support table at the punching station with stops - Support table at the flat bar station with stops - Selector switch for setup and operating modes - 1 foot pedal - Incl. accessories (punches and dies) - Technical documentation - CE design Technical data: Punching unit: Punching force: 40 t Throat depth: 175 mm Hnjdpfxoxu Ugxo Ak Dsn Stroke: 50 mm Strokes per min. (at 20 mm stroke): 20 pcs. Max. sheet thickness Ø: 20 x 15 mm Working height: 970 mm Flat bar shear: Cutting capacity: 300 x 6 / 200 x 13 mm Angle steel 45° (one flange): 50 x 50 x 6 mm Angle steel 90°: 80 x 80 x 8 mm Blade length: 356 mm Working height: 980 mm Round and angle steel shear: Angle steel 90°: 80 x 80 x 8 mm Round: 30 mm Square: 25 mm Working height: 1,110 mm General: Motor power: 3 kW Voltage: 400 V / 50 Hz Dimensions: Width: 800 mm Depth: 1,100 mm Height: 1,520 mm Weight approx.: 580 kg The specified performances refer to steel with R = 45 kg/mm²

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, VOLUMEC Electric Tapping Machine Model: JT3750M EVO2 – Made in Italy Configured as follows: Balanced 3-arm jointed system made from special aluminum Adjustable angle head for tapping threads in any position Includes alignment magnet Hedpsyia Txofx Ak Djnn Brushless technology electric motor, 220 V Simple speed adjustment via potentiometer Quick-change holder, size 3 Table mounting column Technical documentation CE-compliant version Technical data: Tapping capacity in steel: M8 – M36 Speed: 10 – 150 rpm Max. working radius: 1,900 mm Holder: Size 3 Weight: 25 kg Including the following special accessories: VOLUMEC automatic lubrication system VOLUMEC touchscreen control VASTC Subject to errors and prior sale!

Condition: new, functionality: fully functional, Year of construction: 2024, MOSER Hydraulic Guillotine Shear Model: HGL 3106 Stock machine Serial No.: 30603 Year of manufacture: 10/2024 Specifications: - Swing beam design - Upper blade: Two cutting edges - Lower blade: Four cutting edges - Suitable for single and continuous stroke operation - Motorized blade gap adjustment - Motorized backgauge, 750 mm with ball screw spindles, foldable, positionable via NC controller, CYBELEC, model: CybTouch 8 W - Fixed angle stop with scale and foldable stop cam - Worktable with support plates and support balls integrated into the table - Two front support arms - Finger guard with light barrier - Side and rear safety covers - Cutting line illumination - Technical documentation - CE compliant - Colors: * RAL 7015 – Slate grey * RAL 7035 – Light grey * RAL 3003 – Ruby red Technical Data: Sheet thickness ≤ 450 N/mm²: 6 mm Sheet thickness ≤ 700 N/mm²: 4 mm Cutting length: 3,060 mm Cutting angle: 1.6° Main motor: 11 kW Number of hold-downs: 17 pcs Strokes per minute: 20 pcs Oil tank: 160 liters Usable backgauge measuring range: 750 mm Backgauge positioning motor: 0.37 kW Hnodpsxgtq Tefx Ak Don Dimensions (L x W x H): 4,000 x 2,200 x 1,700 mm Weight: 5,500 kg

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation Hsdpfxevupa Re Ak Dsnn - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Hjdpevt Tn Ajfx Ak Djnn Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) Hnsdpfjzczbyox Ak Den - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered.

Condition: used, mileage: 1,001 km, power: 59 kW (80.22 HP), first registration: 01/1955, fuel type: diesel, empty load weight: 3,580 kg, maximum load weight: 3,500 kg, overall weight: 7,080 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,250 mm, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space length: 3,400 mm, loading space width: 2,150 mm, loading space height: 550 mm, Year of construction: 1955, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension, AHK air-light-hydr. Wheelbase: 3250 mm Body: Truck vintage - 3-sided tipper swirl chamber diesel engine type EM4-20, 4-cylinder ( in-line ), 6024cm³, water-cooled, unsynchronized 5-speed gearbox, top speed: 60km/h, The successor model of the H3 was the H3A truck. It was presented to the public at the Leipzig Spring Fair in 1949 and built from mid-1950 to 1956 at the VEB Kraftfahrzeugwerk HORCH in Zwickau, initially as a platform truck. The H3A was a completely new development in its design as a long-hood truck with a diesel engine. The development of the diesel engine goes back to a VOMAG development for the Leipzig Spring Fair, the H3A appeared as a tractor unit with tank semi-trailer, other variants such as three-way tipper, livestock transporter, road tractor, tanker and with special bodies for the post office and DRK, as well as a furniture box. Around 180 H3B front-wheel-drive buses were produced at the LOWA plant in Bautzen on the basis of the H3A chassis. The main area of use was mainly in the civilian sector, but the H3A was also used by the Volkspolizei, or the barracked Volkspolizei, later NVA, Ex Dörr Spedition, errors excepted! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hsdpfx Akevhg R Te Denn - .

Condition: used, mileage: 1,000 km, power: 59 kW (80.22 HP), first registration: 01/1955, fuel type: diesel, empty load weight: 3,580 kg, maximum load weight: 3,500 kg, overall weight: 7,080 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,250 mm, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, loading space length: 3,400 mm, loading space width: 2,150 mm, loading space height: 550 mm, Year of construction: 1955, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, switch 5, leaf suspension, AHK air-light-hydr. Wheelbase: 3250 mm Body: Truck vintage - 3-sided tipper body, swirl chamber diesel engine type EM4-20, 4-cylinder ( in-line ), 6024cm³, water-cooled, unsynchronized 5-speed gearbox, top speed: 60km/h, The successor model of the H3 was the H3A truck. It was presented to the public at the Leipzig Spring Fair in 1949 and built from mid-1950 to 1956 at the VEB Kraftfahrzeugwerk HORCH in Zwickau, initially as a platform truck. The H3A was a completely new development in its design as a long-hood truck with a diesel engine. The development of the diesel engine goes back to a VOMAG development for the Leipzig Spring Fair, the H3A appeared as a tractor unit with tank semi-trailer, other variants such as three-way tipper, livestock transporter, road tractor, tanker and with special bodies for the post office and DRK, as well as a furniture van. Around 180 H3B front-wheel-drive buses were produced at the LOWA plant in Bautzen on the basis of the H3A chassis. The main area of use was mainly in the civilian sector, but the H3A was also used by the Volkspolizei, or the barracked Volkspolizei, later NVA, Ex Dörr Spedition, errors excepted! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hjdpfx Aevhg Hnok Djnn - .

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Traub A 25 Equipment: Boring tool holder Longitudinal turning attachment Weight-controlled feed Hnedezcdp Hspfx Ak Dsn Beautiful, complete machine in technically flawless condition. The machine can be inspected while powered on.

Year of construction: 2008, condition: excellent (used), 1 x oil cooling unit Deryun Hodpfx Askhim Eek Djnn DJ 3 RSA02-CE-400V year of manufacture: 2008 in very good condition. The oil cooler can be inspected.

Condition: used, Wood chip screening plant Chip screening plant Width 1,9m Length 5.3m Hsdpfjtxblksx Ak Djnn Height 0.8m 1st grid 40x40mm 2nd grid 15x15xmm Double scraper for screening system Total length 7.5m (2m straight, 5m upwards) Outer flange width 760x610mm Scraper width 400mm + 250mm Gear motor 4 kW Speed 39 rpm

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Hnodpfxjiwaxno Ak Djn Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.