Used Engel Two K Injection Molding Machine for sale (91,742)

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system Gsdpfx Ajy N R N Uon Robl 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, Year of construction: 2017, Lot consists of: (1) Injection molding machine, Handling: Wittmann | W842PRO-0111 | 2017 Temperature control: HB Therm | HB-100 Z1 | 2017 Dryer: Somos | RDM 100 | 2021 Miscellaneous: 1x Conveyor Belt Technical Details: Power supply voltage (V): 400 Gsdoy N R I Dopfx An Rebl Frequency (Hz): 50 Weight (t): 26.8

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Gbsdpsy N R Iqofx An Rsl

Condition: used, Year of construction: 2014, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Gbedsy N R Htspfx An Rol

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 44731, clamping force: 500 kN, screw diameter: 25 mm, clearance between the columns: 320 mm, injection weight: 47 g, mold height (min.): 200 mm, opening stroke: 550 mm, total length: 4,000 mm, total width: 1,163 mm, total height: 1,787 mm, overall weight: 2,300 kg, input frequency: 50 Hz, input voltage: 400 V, input current: 58 A, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. Gjdpfex Srggjx An Rjbl A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 161746, clamping force: 800 kN, screw diameter: 30 mm, clearance between the columns: 420 mm, injection weight: 59 g, mold height (min.): 250 mm, opening stroke: 750 mm, total length: 4,300 mm, total width: 1,600 mm, total height: 2,014 mm, overall weight: 3,850 kg, heating capacity: 4.2 kW (5.71 HP), pump power: 22 W, power: 32 kW (43.51 HP), input frequency: 50 Hz, input voltage: 400 V, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Gbjdpfx Ansx Srizs Rjl Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Gsdpfxsx Spw As An Rjbl Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, clamping force: 70 kN, screw diameter: 32 mm, injection weight: 109 g, type of input current: AC, The Negri Bossi 70T in very good condition comes with hopper loader distance between tie bars 360x315 Godpfx Asy Rvfksn Rebl

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, injection weight: 109 g, The Negri Bossi 55T in very good condition the screw size 32mm distance between tie bars 315x280mm year of manufacture 2002 Gbodpey Rvcvjfx An Rel

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, Due to a company relocation in the cleanroom injection molding sector, I am offering for sale an ENGEL injection molding machine with only 11,300 operating hours, in like-new condition. The machine was originally intended for another NYPRO facility but is now available for sale. Attached you will find: • Current pictures of the machine • The order confirmation from ENGEL to NYPRO The original purchase price was approximately €330,000. The selling price is €79,500, crane included. Gbsdjwb Dl Tspfx An Rsl Technical specifications can be provided upon request and are also listed in the documents below. Included in the price: disassembly of the crane onto two Euro pallets, removal of the machine from the cleanroom, and loading onto your truck with a 15-ton forklift. If you are interested or have any questions, please feel free to contact me at any time.

Condition: used, Year of construction: 2018, Ser. No. 221921, Control system, Manufacturer: Engel, Type: CC300, Clamping force: 1,700 t, 2 injection units, rotary table, minimum/maximum mold installation height: 800 - 1,600 mm, tie bar spacing: 3,350 mm, clear opening width/height: 1,850 / 1,415 mm, 16 cascade units, 64 hot runners, hydraulic core pulls: 4 (fixed side) / 4 (moving side), screw diameter: 105 / 50 mm, shot weight: 4,050 / 410 g, operating hours: 22,401, machine weight: 75,400 kg, mold temperature control unit, Manufacturer: Oni, Type: Rhytemper FlexControl 32, 4x 8-circuit block modules 125 °C, 6-circuit block modules 125 °C, visualization unit, part extraction handling, Manufacturer: Engel, Type: Viper 60, year of construction: 2018, Ser. No. 221938, parts enclosure, discharge conveyor belt, mobile conveyor belt, Manufacturer: Engel, Type: BGR FB100 KMAT, year of construction: 2018, Ser. No. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing are not included in the scope. Damages: hydraulic hoses leaking. Gjdsy I R Tqjpfx An Robl

Condition: used, Year of construction: 2018, Serial No. 221920, Control unit, Manufacturer: Engel, Type: CC300, Clamping force: 800 t, 2 injection units, rotary table, minimum/maximum mold installation height: 500 - 1,100 mm, platen distance: 2,100 mm, clear opening (horizontal/vertical): 1,170 / 1,000 mm, 8 cascades, 48 hot runner zones, hydraulic core pulls: 2 (moving side) / 4 (fixed side), screw diameter: 80 / 60 mm, shot weight: 1,800 / 250 g, operating hours: 28,236, machine weight: 30,000 kg, mold temperature control, Manufacturer: Oni, Type: Rhytemper FlexControl 30, 3x 8-circuit block modules 125 °C, 6-circuit block modules 125 °C, visualization unit, part handling unit Manufacturer: Engel, Type: Viper 20, Year of manufacture: 2018, Serial No. 221937, conveyor belt parts enclosure, belt conveyor, Manufacturer: Engel, Type: BGR FB100 KMAT, Year: 2018, 2102958, L/W approx. 3,500 x 800 mm, external temperature control unit and material dosing not included in the scope of supply. Gbedpoy I R Insfx An Rol

Condition: used, Year of construction: 2018, Serial no. 221903, control system, manufacturer Engel, type CC300, clamping force 400 t, installation height 450 - 950 mm, platen spacing 1,450 mm, 8 cascade valves, 24 hot runner zones, hydraulic core pulls 2 (DS) / 4 (AS), screw diameter 60 mm, shot weight 750 g, operating hours 30,738, machine weight 24,100 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 8, 2x 4-circuit block modules 125 °C, visualization unit, part removal handling, manufacturer Engel, type Viper 20 EP8, year 2018, serial no. 221917, part enclosure, belt discharge conveyor, manufacturer Engel, type FL4600 B600HLI, year 2018, serial no. 2101471, external temperature control unit and material dosing system not included in the offer. Gbjdey I Rxmopfx An Rel

Condition: used, Year of construction: 2023, operating hours: 22 h, functionality: fully functional, machine/vehicle number: 61035145, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 393 cm³, injection pressure: 2,429 bar, injection weight: 140 g, mold height (min.): 200 mm, ejector force: 33,000 N, ejector stroke: 120 mm, opening stroke: 950 mm, installation height: 450 mm, total length: 5,650 mm, total width: 1,820 mm, total height: 1,950 mm, overall weight: 6,700 kg, heating capacity: 15.5 kW (21.07 HP), drive type: Vollelektrisch, clear span: 570 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you here our certified and highly flexible stock machines: The base model injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond to market demands quickly and innovatively. It combines high performance, user-friendly operation, and short lead times. It is suitable for a wide range of applications, including packaging, electrical and electronics industries, medical technology, and automotive manufacturing. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency through an all-electric machine concept – Meeting demanding delivery schedules with a base machine concept offering a wide range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM ▪ MC P1 with 15" TFT colour screen and multitouch functionality CLAMPING UNIT ▪ Clamping force: 1,200 kN ▪ Maximum mould opening force: 180 kN ▪ Clear space (h x v): 520 x 470 mm ▪ Mounting platen (h x v): 690 x 640 mm ▪ Mould installation height min. - max.: 180 - 450 mm ▪ Maximum opening stroke: 850 mm ▪ Maximum mould opening path: 450 mm ▪ Ejector drive: electric ▪ Ejector stroke: 120 mm ▪ Ejector force forward/backward: 27 / 33 kN ▪ Ejector speed forward/backward: 300 / 300 mm/s ▪ Maximum mould weight: 850 kg INJECTION UNIT ▪ Screw diameter / type: 35 mm / standard ▪ Effective L/D ratio: 22.9 ▪ Injection pressure: 2,429 bar ▪ Stroke volume: 154 cm³ ▪ Shot weight at max. stroke (for PS): 140 g ▪ Injection speed: 200 mm/s ▪ Injection flow rate: 192 cm³/s ▪ Screw drive / rotation speed: 374 rpm ▪ Plasticising rate (standard screw): 18.9 g/s ▪ Nozzle contact force: 34 kN ELECTRICAL PARAMETERS ▪ Connected load: 22.7 kW ▪ Installed heating power: 11.5 kW ▪ Power supply: 200 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS ▪ Net weight with control cabinet: 6.7 t ▪ Length x width x height: 5.18 x 1.76 x 1.90 m ADDITIONAL EQUIPMENT ▪ Wear-resistant plasticising unit Godpfoy Rmwdsx An Rsbl ▪ BluePower full insulation for plasticising cylinder ▪ Open nozzle ▪ Air valve, single (BWAP) ▪ Pneumatic hot runner shut-off control, single ▪ Electrical interface for pneumatic cascade, 4-fold ▪ Euromap interface for handling: E18 + E67 ▪ Euromap central computer interface: E67, E77 ▪ Water manifold, 4-fold ▪ Electrical provisions for hydraulic auxiliary unit ▪ Automatic central lubrication ▪ Adaptive Process Control (APC) ▪ Injection-compression moulding mode ▪ Graphic analysis package ▪ Swivelling injection unit The machine is located at our Parsdorf facility and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Godeyz Sd Depfx An Rjbl Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: used, Year of construction: 2013, clamping force: 2,400 kN, screw diameter: 55 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, ejector force: 59 N, Clamping force: 240 t Year of manufacture: 2013 Injection unit .../1330 Screw diameter: 55 mm Specific injection pressure: 2041 bar Injection volume: 653 ccm Screw L/D ratio: 22 Tool clamping system 240/... Clamping force: 240 t Gjdpfxoyvtu Hs An Rjbl Mould platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Mold height: 350 mm Opening stroke: 725 mm Max. platen distance: 1075 mm Ejector stroke: 200 mm Weight: 10,000 kg Dimensions (m) L x W x H: 5.5 x 1.8 x 2.4 m Year of manufacture: 2013 Control: Unilog B6

Condition: good (used), Year of construction: 2011, clamping force: 240 kN, screw diameter: 50 mm, displacement volume: 540 cm³, injection pressure: 2,470 bar, injection weight: 491 g, mold height (min.): 350 mm, Battenfeld HM 500/3400 Injection Moulding Machine General Specifications Clamping force: 240 t Year of manufacture: 2011 Control system: Unilog B6 Injection Unit Unit designation: ... / 1330 Screw diameter: 50 mm Injection pressure: 2470 bar Injection volume: 540 cm³ Gbsdpfx Asyzzkgjn Rjl Screw L/D ratio: 22 Clamping Unit Clamping system: 240 / ... Clamping force: 240 t Platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Ejector stroke: 200 mm Mould height: 350 mm Opening stroke: 725 mm Max. daylight (max. platen distance): 1075 mm Dimensions and Weight Weight: 10,000 kg Dimensions (L x W x H): 5.5 x 1.8 x 2.4 m

Condition: used, Year of construction: 2006, operating hours: 1,609 h, functionality: fully functional, machine/vehicle number: 61008195, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 2,500 bar, injection weight: 183 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 750 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines: The fully hydraulic CX series features particularly compact, efficient, and flexible two-platen machines. The very compact two-platen concept with cantilevered clamping provides generous space for peripheral equipment and optimal accessibility. Efficient and intelligent energy management with BluePower servo drive provides a powerful foundation to meet the highest demands and delivers the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM • MC6 with TFT colour touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: 800 kN • Max. mould opening force: 55 kN • Clear space (h x v): 470 x 420 mm • Mounting plate (h x v): 670 x 670 mm • Minimum - maximum mould installation height: mm (specify values if known) • Maximum daylight: 750 mm • Maximum mould opening stroke: 500 mm • Ejector drive: hydraulic • Ejector stroke: 150 mm • Ejector force forward/backward: 23/10 kN • Ejector speed forward/backward: 760 / 800 mm/s • Maximum mould weight: 1000 kg INJECTION UNIT • Screw diameter/type: 40 mm / Standard (adaptable) • Effective L/D ratio: 20 • Injection pressure: 1860 bar • Stroke volume: 201 cm³ • Shot weight at max. stroke for PS: 183 g • Injection speed: 100 mm/s • Injection flow rate: 126 cm³/s • Screw drive/speed: 295 rpm • Plasticizing rate (standard): 12.3 g/s • Nozzle contact force: 50 kN ELECTRICAL PARAMETERS • Connected load: 15.0 kW Gbodpey Rlmwjfx An Rjl • Installed heating capacity: 10.9 kW • Power supply: 400 V / 50 Hz, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: 3.55 t • Length x width x height: 3.96 x 1.48 x 2.02 m ADDITIONAL FEATURES • Wear-resistant plasticizing • BluePower full insulation for plasticization cylinder • Open nozzle • 1 additional heating circuit for nozzle heating • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Hydraulic core pull, single (BWAP) • Euromap interface for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Adaptive Process Control (APC) • Injection-compression mode • Graphical analysis package The machine is located at our factory in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Gedpfx Anoy Iwlae Rjbl Technical specifications as per the pictures! Machine is immediately available!

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Gjdpfxey Ir Nyj An Rebl Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: repair required (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: X27054, clamping force: 2,000 kN, screw diameter: 62 mm, Used Stork IMM 2000-1450 injection molding machine. Gedpfx Anewhldds Robl The machine still needs to be tested and repaired.

Condition: repair required (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: X29324, clamping force: 2,500 kN, screw diameter: 62 mm, Used Stork IMM 2500-1450 injection molding machine. Gjdpfjwhlk Dsx An Robl The machine still needs to be tested and repaired.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: X46028, clamping force: 4,400 kN, screw diameter: 84 mm, Used Stork IMM 4400EP-5650-065 injection molding machine. The machine still needs to be tested and repaired. Gedpfxewhmvne An Robl

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Gbjdpowhkfyefx An Rol

Condition: used, Motor, 1FK7060-5AF71-1DU5-Z, 4 available. Motor, 1FK7100-5AF71-1AG0, 2 available. Motor, 1FW3204-1GN72-5CK0-Z, 1 available. Motor, 1FW3204-1GY72-5CK4-Z, 1 available. Gbedpfxsrbzx Re An Rel Motor, 1FW3204-7GN01- 4GY7-Z, 2 available. Display, 2 available. Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 available. Siemens Simodrivo Drives, 6SN1111-0AA00-1FA0, 1 available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 available. Siemens single motor module, 6SL3126-1TE31-3AA3, 1 available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 available. Siemens active line module, 6SL3136-7TE31-2AA1, 2 available. Siemens sinamics sensor module SMC20, 6SL3055-0AA00-5BA1, 6 available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 available. Siemens motor module, 6SL-3126-1TE32-0AA4, 1 available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 available. Siemens simodrive drives, 6SN1111-0AA00-1FA0, 1 available. Motherboard