CNC milling machine

MAHO MH 500 W

Condition: good (used), Year of construction: 1988, CNC universal milling machine, manufactured by MAHO, model MH 500 W, with Heidenhain TNC 232 control system. Equipped with a RÖHM machine vice, jaw width 125 mm. Travel distances: X 500 mm, Y 380 mm, Z 350 mm. Table: 700 mm x 350 mm. Ndodpfxsz D T U Ds Af Sob Spindle taper: ISO 40. Spindle speeds: 20 - 4000 rpm, infinitely adjustable. Machine weight: approx. 2000 kg. Machine documentation available. Machine can be demonstrated under power. Very clean machine in good condition.

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Nsdpfjx S Rcmjx Af Sodb

Condition: used, Control system: MAHO 432 Spindle mount: SK 40 Spindle speeds: 20 - 4000 RPM Travel distances: X 500 mm, Y 380 mm, Z 350 mm Njdpfxjzzxhge Af Sodb 16-position tool changer Table load capacity: 250 kg The machine can be inspected while in operation (under load).

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 W with Heidenhain 232 control system. Fixed table, SK 40 spindle mount with hydraulic collet chuck. The machine has been idle for some time and is sold as is, without testing. Njdpfx Afjzvblkj Ssdb

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine Ndsdpfsuhpiyjx Af Sob

Condition: good (used), 3-axis milling machine MAHO MH500 W2, control system MAHO 2-32, serial number 52447. Ndodpfx Aeztdddjf Seb

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Njdpfx Afsr Igv Rs Sedb Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.

Condition: used, Model: H-600 Serial no: 11-122-116 Operating hours: 17,395 Nedpfoyzzldox Af Sjdb Voltage: 380 V, 50 Hz RPM: 1,425 Power: 1 HP Current: 4.0 A Phases: 3

Condition: good (used), Working travels 500x350x380mm Nsdsff R Sljpfx Af Sedb Table size 790x360mm Spindle taper ISO40 Spindle speeds 63-4000 rpm Active digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1990, MAHO MH 500W with Heidenhain TNC 320 The machine comes from a training workshop and is in very good condition. The TNC 320 offers intuitive and highly flexible operation and programming according to current industry standards. Technical specifications: - Heidenhain TNC 320 retrofit - Travel X- 500 mm, Y- 380 mm, Z- 350 mm - Spindle taper SK 40 - Vertical quill stroke 50 mm - Spindle speeds 20–3150 rpm, stepless - Feed rate 1–3000 mm/min - Rapid traverse 5 m/min - Table load capacity 250 kg - Total power requirement 11.3 kW - Machine weight approx. 2 t - Handheld control unit - Safety guard Njdpsxw N S Iefx Af Sodb An on-site inspection/test under power is, of course, possible. We are happy to offer transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and equipment from other renowned manufacturers. We support you throughout the entire process! From machine purchase, transport, and delivery, up to commissioning and subsequent maintenance or repair work – you can rely on us.

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron Nsdpfxstv Riaj Af Ssdb - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Year of construction: 1988, condition: good (used), For sale is a milling machine from Maho, model 500 W. The machine is in good condition and fully functional. Year of manufacture: 1988 Heidenhain TNC 232 Travel distances: X - 500 mm, Y - 380 mm, Z - 350 mm Spindle mounting: ISO 40 Vertical quill travel: 50 mm Spindle speeds: 20-4000 rpm, stepless Feed rate range: 1-3000 mm/min Rapid traverse rate: 5 m/min Table load capacity: 250 kg Total power consumption: 11.3 kW Machine weight: approx. 2 t All prices plus VAT. Machine purchase and sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? Ndsdpfoittrlox Af Seb For more information or contact options, please visit our website.