~AS NEW~ | Year 2016 | with stops

Mafell LS 103 EO

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Bledjv Si Szjpfx Ak Eeg Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Swiveling aggregate, chain width 10 mm Storage location: Nattheim Bjdpfovvku Esx Ak Eslg

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Bljdst Amc Ijpfx Ak Eeg

Condition: used, Empty weight: 6.000 kg Dimensions (LxBxH): 340 x 210 x 190 cm Price: On request - Documentation available: No - CE certificate present: No - Max. working width: 860 - Transport dimensions: 3400mm x 2100mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Bljdpfx Aexbf Iaek Ejg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Blsdpfx Ajymxqaek Ejg Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Blodpfx Akeq Auzaj Eog Milling motor bottom 1.8 kW Sliding table with Superfix manual clamp Saw blade 2 slitting discs

Condition: excellent (used), Equalizer: shaft width 260mm length of table 900mm 3 knife shaft Planer: planing width 250mm dimensions of the table 250 x 600mm maximum planing height 130mm feed rate 8m/min Milling machine: Bjdpfstur Epex Ak Eolg spindle diameter 30mm max tool diameter 90mm Saw: cutting height 80mm blade diameter 250mm Drill: drill diameter 3-16mm table dimensions 210 x 360mm

Condition: excellent (used), functionality: fully functional, Cosmec SM100 Multi-Blade Saw Track width: 240 mm Cutting height: 100 mm Maximum saw blade diameter: 300 mm Blade bore: 60 mm Anti-kickback pawls Feed speed adjustable via variator Blsdpfjyngw Rjx Ak Eog Main motor power: 11 kW

Condition: ready for operation (used), functionality: fully functional, planing width: 600 mm, overall weight: 3,000 kg, Four-side planer Manufacturer: Kupfermühle Model: Vuin 605 Bodey At D Uopfx Ak Eelg Planing width: 600 mm Max. planing height: 200 mm Table height adjustable Feed rate adjustable in steps 2 outfeed rollers Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Total operating current: 60 amps Total control current: 6 amps Transport dimensions: Machine approx. 2000 x 1800 x 1800 mm + pallet with accessories 1200 x 800 x 500 mm Total weight approx. 3000 kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 3000 mm Cutting depth: 125 mm Scoring cutter: yes Sawblade height and tilt adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: scale Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 400 mm Speed: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Mill arbor pivoting: yes 0 - 45° Mill arbor height and tilt adjustment: handwheel Mill arbor height and tilt indicator: scale Mill arbor: 30 mm Blodpfx Aswhuuxek Esg Mill arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. tool diameter: 180 mm Motor power / milling cutter: 4.4 kW Extraction connection: 100 mm, 100 mm, 80 mm Machine length: 2500 mm Machine width: 1500 mm Weight: 800 kg