Surface grinder

Mägerle MFP-125-35

Condition: good (used), Year of construction: 2009, Machine will come with robot . Fsdoxfu S Nspfx Ad Iepi 42.000 rpm

Condition: new, connected load frequency 230 V battery 24V / 100Ah Fpsdpfovu Hccex Ad Iei Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor Fpodpox Av Adsfx Ad Isi - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Fjdow Uc Hnopfx Ad Iopi Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit Fjdpfxorxcu So Ad Ijpi

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces Fodox H A Nbopfx Ad Iopi • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 160,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M Fpsdpfxjxp Hq Ee Ad Iei The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool holder: MK 3 Spindle speeds, stepless: 150 - 2500 rpm Overhang: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Features: - Vario drive for stepless adjustment of the desired speed - Quill feed can be operated manually or via mechanical feed - Set speed can be quickly and easily read on a digital display - Sturdy cast iron table with T-slots and coolant trough - Adjustable drilling depth stop, drilling depth can be read on a scale - Thread cutting device - CE / IEC, German documentation and German service Scope of supply: - Quick-change drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light Fodpfxod R Nv Is Ad Ispi - Height-adjustable protective cover

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Fpedpfjxyk S Iex Ad Iei

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Fsdpfxjw T Tpdo Ad Iepi Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.