MORI-SAY 6/42 CNC

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Control: MANUAL PLUS 4110 MACHINE DETAILS Electrical Supply Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Kwsdpox Uz Edjfx Ad Not Performance Data Power: 24 kVA Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: like new (used), Year of construction: 2017, operating hours: 59 h, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, feed length X-axis: 510 mm, feed length Z-axis: 220 mm, feed rate X-axis: 20 m/min, grinding wheel diameter: 205 mm, distance table to spindle center: 357 mm, table load: 120 kg, type of input current: three-phase, grinding wheel width: 16 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 2,100 kg, grinding spindle motor power: 2,200 W, grinding wheel speed: 3,600 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 Colour touchscreen: Yes Maximum grinding lenght x width: 400 x 200 [mm] Stroke X axis (table movement): 510 [mm] Min. Stroke speed X axis: 100 [mm/min] Max. Stroke speed X axis: 20000 [mm/min] Z axis travel (transverse movement): 220 [mm] Min. distance spindle nose / table: 22.5 [mm] Max. distance spindle nose / table: 357.5 [mm] Max. load on table: 120 [Kg] Grinding wheel min. speed: 1000 [rpm] Grinding wheel max. speed: 3600 [rpm] Grinding spindle motor power: 2.2 [kW] Max. diameter grinding wheel: 205 [mm] Max. grinding wheel width: 16 [mm] Min. grinding wheel width: 6 [mm] Grinding wheel bore: 31.75 [mm] Number of running hours: 59 [h] Supply voltage: 400 [V] Total power required: 11 [kVA] Kwodsw Hf Hiopfx Ad Net Weight : 2100 [Kg] INCLUDED EQUIPMENT: x1 150 [L] coolant tank FB1/R with papertape filtration unit FB1 x1 BRAILLON electro-permanent magnetic chuck type EPEFINE 2 x1 BRAILLON magnetic chuck remote control, microprocessor-based, type T10 x5 grinding wheel flanges x1 oil chiller x1 transformer x2 service keys x1 balancing shaft x1 set of axis-brackets for transport STANDARD CONVERSATIONAL PROGRAMMING MODE: Straight and angular dressing (standard) Surface grinding, multiple plunge grinding, and face grinding (standard) INCLUDED ISO PROFILING: Wheel profiling Contour machining of workpiece Full functionality for V-shape and freeform programming on the grinding wheel, and ISO contouring on the workpiece. Precise positioning integrated: +/- 1 [μm] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to brands like Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see cylindrical grinder, lathe, machining center, milling machine.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F876E01576L, Year of construction: 2013, operating hours: 16,860 h, load capacity: 12,000 kg, lifting height: 5,250 mm, fork length: 3,250 mm, fork width: 2,370 mm, empty load weight: 16,350 kg, TECHNICAL DETAILS Kwodox Tqanepfx Ad Net Lifting capacity: 12,000 kg Lifting height: 5,250 mm Clearance height: 4,500 mm Fork length: 3,250 mm Maximum fork width: 2,370 mm Minimum fork width: 710 mm MACHINE DETAILS Fuel type: Diesel Number of wheels: 6 Attachment: Sideshift, fork positioner Dimensions & Weight Dimensions (L x W x H): 4,350 x 2,500 x 4,500 mm Unladen weight: 16,350 kg Operating hours: 16,860 h EQUIPMENT Pneumatic tyres Full cab Work lights License plate Heater Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516216E01234, Year of construction: 2014, operating hours: 5,586 h, load capacity: 2,000 kg, lifting height: 3,250 mm, free lift: 1,640 mm, fork length: 1,590 mm, fork width: 890 mm, TECHNICAL DETAILS Lifting capacity: 2,000 kg Lifting height: 3,250 mm Free lift: 1,640 mm Fork length: 1,590 mm Maximum fork width: 890 mm Minimum fork width: 370 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,051 mm x 1,149 mm x 2,160 mm Weight: 3,448 kg Number of wheels: 4 Drive: Electric Kwjdpfxsx Tp T He Ad Net Battery type: 625 Ah, 48 V Battery test result: 52% Year of battery manufacture: 2017 Operating hours: 5,586 h EQUIPMENT Fork adjustment Side shift Work lights Free lift

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. Kwsdpovtancefx Ad Nst VAT is not needed if the sales happen outside of Turkey.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: PB12093N2025005, shaft diameter: 155 mm, empty load weight: 450 kg, Equipment: documentation/manual, Unused profile bending machine, year of manufacture 2025! TECHNICAL DETAILS Shaft diameter: 50 mm Roller diameter: 155 mm Capacity round diameter: 50 mm Shaft speed: 11 rpm Kwsdjx Tp N Uspfx Ad Net Number of rollers: 3 pcs. MACHINE DETAILS Control: Conventional Power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,800 mm Net weight: 450 kg Transport packages: 1 pc. Operating hours: 0 EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, table width: 550 mm, table length: 300 mm, stroke length: 180 mm, pressing force: 28 t, empty load weight: 800 kg, Unused band bending machine, year of manufacture 2025! TECHNICAL DETAILS Capacity: 28 t Max. stroke: 180 mm Table width: 550 mm Table length: 300 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Net weight: 800 kg Transport packages: 1 piece Operating hours: 0 EQUIPMENT Kjdpfx Adsx Tp E Ae Nowt Documentation CE marking CE certificate

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The Kodpfx Adeul Efmj Newt combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: like new (used), Year of construction: 2025, functionality: fully functional, throat depth: 1,100 mm, pressing force: 100 t, table width: 300 mm, table length: 1,500 mm, stroke length: 380 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Kjdpfex Tp Abjx Ad Njwt Capacity: 100 t Max. stroke: 380 mm Throat depth: 1,100 mm Frame gap: 100 mm Height adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Number of columns: 2 MACHINE DETAILS Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 EQUIPMENT Movable press cylinder Documentation CE marking CE certificate

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 60 t, stroke length: 380 mm, table width: 260 mm, table length: 1,000 mm, throat depth: 750 mm, Unused hydraulic press, year of manufacture 2025! TECHNICAL DETAILS Capacity: 60 t Max. stroke: 380 mm Height adjustment: 750 mm Throat depth: 750 mm Ksdpfxex Tpy Ts Ad Nswt Adjustment length: 100 mm Table width: 260 mm Table length: 1,000 mm Number of columns: 2 MACHINE DETAILS Motor power: 2.2 kW Dimensions & Weight Dimensions (L x W x H): 1,100 x 800 x 2,200 mm Net weight: 540 kg Transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Kwsdpjt E Dbyefx Ad Nst Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2025, operating hours: 57 h, functionality: fully functional, machine/vehicle number: 24111638, overall weight: 11,600 kg, cutting height (max.): 940 mm, table width: 1,050 mm, table length: 6,000 mm, Equipment: CE marking, Band saw from 2025 with only 57 operating hours! Sale due to business closure. TECHNICAL DETAILS Max. cutting height: 940 mm Table length: 6,000 mm Table width: 1,050 mm Saw orientation: Horizontal MACHINE DETAILS Weight: 11,600 kg Protection: 100 A Total power: 51 kW Main motor power: 30 kW Operating hours: 57 hours EQUIPMENT Documentation Kjdpfox Tpx Nsx Ad Njwt CE marking CE certificate

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: AB/226310, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, empty load weight: 1,310 kg, MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,300 x 1,880 x 2,350 mm Unladen weight: 1,310 kg Kedpex Tpv Iofx Ad Newt

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Kwjdpour Hfzefx Ad Net

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, stack height: 560 mm, working height: 920 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Max. cutting width: 4,300 mm Lift table width: 1,600 mm Working height: 920 mm Saw blade projection: 110 mm Kwodex Tptmjpfx Ad Not Program fence speed: 90 m/min Saw carriage speed: 130 m/min Max. stack height without pit: 560 mm Max. stack weight: 4 t MACHINE DETAILS Main saw motor: 13.5 kW Scoring unit motor: 2.2 kW Average air consumption: 210 Nl/min Transport packages: 8 pcs.