Vibrating sieve 800mm CE

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. Lodpfx Absz I Tt Ij Aoru TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2004, condition: used, functionality: fully functional, ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 200 Machine for compaction of the raw material is exclusively effected by the press rollers under hydraulic pressure. Specifically for use in the production area. Built in 2004. CHARACTERISTICS Lrsdjycw Uvepfx Ab Aju - Control system: external control cabinet - Roller diameter: 200 mm - Roller width: 75 mm PRODUCTION - Output: up to 500 kg/h - Maximum pressing force: 20 kN/cm - Maximum roller gap: 5 mm - Maximum roller speed: 38 U/min DIMENSIONS - Footprint: 2,010 mm x 1,245 mm x 1,700 mm - Weight: 2,450 kg - Cabinet size: 2,100 mm x 800 mm x 600 mm - Weight without switch cabinet: 2,050 kg - Switch cabinet weight: 400 kg

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Ledez I S Uwepfx Ab Asru Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, machine/vehicle number: CT1133L70678, Year of construction: 2021, operating hours: 6,200 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm MACHINE DETAILS Battery year of manufacture: 08/2021 Lodpfx Abo Ad Rdie Aeru Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage at rest: 25.3 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 800 x 2,200 mm Weight: 1,500 kg Service valid until: 03/2027 UVV (occupational safety) valid until: 03/2027 Operating hours: 6,200 h EQUIPMENT Initial lift Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 337

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh Lrsdpfx Aowrp Dpob Aou - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS COMPATIBILITY FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Suitable for: Linde H50D FEATURES Design: 360° rotating device with rotating clamp Lodo Ad N Igjpfx Ab Asru Internal opening: approx. 400–1,800 mm Fork positioner: present (?) MACHINE DETAILS MANUFACTURER AND MODEL Manufacturer: Linde Type: Rotating clamp Year of manufacture: 2020 Previous use: Linde H50D with 5,000 kg load capacity DIMENSIONS Width: approx. 1,700 mm Height: approx. 1,000 mm Length: approx. 1,250 mm EQUIPMENT 360° rotating device Rotating clamp Fork positioner Lot number: 1139 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 7,794 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Lrsdpo Ad N H Aofx Ab Aou Manufacturer: Still Type: EXU-SF20 Year of manufacture: 2019 Operating hours: 7,794 h Lifting Capacity and Lift Lifting capacity: 2,000 kg Lift height: 150 mm Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 250 Ah Battery year of manufacture: Measured idle voltage: 25.4 V MACHINE DETAILS Dimensions and Weight Length: 2,000 mm Width: 800 mm Height: 1,400 mm Own weight: 800 kg EQUIPMENT Battery charger Functional and condition video available Lot number: 340 Collection Conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck bed height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Year of construction: 2014, condition: good (used), Technical Data – Condenser Maximum volume flow rate: 300 m³/h Maximum condenser dimensions in delivered condition: approximately 430 mm x 1610 mm high, cylindrical part: approximately Ø 273 mm Lrodpfx Aecpwhbjb Aou Weight of the chamber in delivered condition: approximately 80 kg Capacity of the upper part (condenser): approximately 30 L Capacity of the lower part (collection container): approximately 28 L Material of elastomers: NBR/FKM/PTFE Maximum condenser temperature: 1 to 80 °C Maximum condenser vacuum: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Maximum heat exchanger temperature: 1 to 80 °C Heat exchanger working fluid: water Maximum water pressure in heat exchanger: 10 bar Material of heat exchanger: tin-plated copper Material of condenser: stainless steel For technical questions or other sizes, please inquire.

Condition: ready for operation (used), functionality: fully functional, operating hours: 5,515 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,200 kg Lifting Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: Simultaneous lifting of 2 pallets Ground clearance: Increased by initial lift, suitable for uneven surfaces Battery Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 24.6 V Battery year of manufacture: 2023 MACHINE DETAILS Machine data Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 5,515 h Own weight: 1,500 kg Dimensions Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Lrodpj Ad N E Eofx Ab Asu EQUIPMENT Initial lift Battery year of manufacture 2023 Formerly a Linde full-service unit Lot number: 370 Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: D12HPSP Year of manufacture: 2021 Operating hours: 6,655 h Lifting Capacity and Lift Lifting capacity: 1,200 kg Lifting height: 1,924 mm Fork length: 1,150 mm Initial lift: available Ledpfxo Ad N Els Ab Ajru Pallet capacity: 2 pallets simultaneously Battery Battery year of manufacture: Week 44/2023 Battery voltage: 24 V Battery capacity: 375 Ah Measured battery voltage: 25.5 V MACHINE DETAILS Dimensions and Weight Overall length: 2,500 mm Overall width: 800 mm Overall height: 2,200 mm Own weight: 1,500 kg EQUIPMENT Initial lift for increased ground clearance on uneven surfaces Previously a Linde full-service machine Lot number: 390 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2005, functionality: fully functional, For sale: CNC Turning Center EMCO Turn 325-II (Year 2005) Condition: Good, technically sound. Manufacturer: EMCO Maier GmbH (Austria) Model: Turn 325-II Year of manufacture: 2005 A compact and reliable CNC turning center suitable for metal part machining, threading, and milling in small to medium-sized production runs. Main technical specifications: (based on EMCO Turn 325-II model specification) Control: Siemens Max. turning diameter: 250 mm Max. turning length: 500 mm Spindle speed: up to 5000 rpm Tool turret: 12 positions (automatic tool changer) Max. tool length: 100 mm Motor power: approx. 15 kW Cooling: integrated cooling system Power supply: 400 V / 50 Hz Machine weight: approx. 3500 kg If you have additional questions, we are happy to assist. Lodpfx Asxp Iyhob Aeru

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,386 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 10,386 h Load capacity: 1,800 kg LIFTING EQUIPMENT Mast type: Triplex mast Lifting height: 4,500 mm Full free lift: available FORKS AND HYDRAULICS Fork length: 1,000 mm Hydraulic valves: 3rd + 4th valve Fork positioner: hydraulic Side shifter: available BATTERY Battery year of manufacture: Battery voltage: 48 V Battery capacity: 898 Ah Battery idle voltage: 54.6 V MACHINE DETAILS DIMENSIONS AND WEIGHT Overall length: 3,000 mm Overall width: 1,150 mm Overall height: 2,060 mm Dead weight: 3,400 kg EQUIPMENT Battery charger Semi-cabin Lateral fall protection LED work light (rear) Orange warning light Comfort seat with lumbar support Seat heating Lot number: 229 Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Ljdpfe Ad N D Uox Ab Asru Loading from the rear via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: ready for operation (used), functionality: fully functional, operating hours: 4,777 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 4,777 h Load capacity and mast Load capacity: 1,800 kg Lifting height: 4,500 mm Mast type: Triplex mast Full free lift: available Battery Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Hydraulics Hydraulic valves: 3rd and 4th valve Side shifter: available Hydraulic fork positioner: available Inspections and maintenance Service valid until: 10/2027 UVV inspection valid until: 10/2027 MACHINE DETAILS Dimensions and weight Length: 3,000 mm Width: 1,150 mm Height: 2,060 mm Own weight: 3,400 kg EQUIPMENT Battery charger Fork positioner with side shifter Lateral fall-through guard LED work light at the rear Ledpfxo Ad N Dno Ab Asru Orange warning light Comfort seat with lumbar support Seat heating Lot number: 219 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: excellent (used), Planetary mixer Herbst HRV-S 2-7 Power 1.5 kW Speed adjustable via frequency converter with control cabinet Wall scraper Vacuum pump Lredpevlwdlsfx Ab Aou mounted on stainless steel plate Very good condition, straight from production!!!

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,598 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lrsdpfxj Ad N Dhs Ab Aou GENERAL Manufacturer: Still Type: RX60-30 Year of manufacture: 2020 Drive type: Electric Operating hours: 10,598 h LIFTING CAPACITY AND MAST Lifting capacity: 3,000 kg Lifting height: 4,150 mm Mast type: Duplex mast Fork length: 2,400 mm BATTERY Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery date: 18/2020 (?) Battery voltage in idle state: 84.9 V INSPECTIONS AND MAINTENANCE Service valid until: UVV inspection valid until: MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 4,900 mm Width: 1,200 mm Height: 2,750 mm Weight: 5,100 kg EQUIPMENT Former Still full-service unit Clear-view mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Half-cab with windshield wiper White, non-marking tires LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Lot number: 155 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.