Vibratory feeder dispenser made of stainless steel

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Dkedozf Ircspfx Aahjp Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Year of construction: 2017, condition: refurbished (used), ROLL CONTAINER, ROLLING CART, 3-sided, FIREWOOD, 155 cm 1 ROLLING CART, 810 x 720 mm Height approx. 155 cm Art. No. RW-3155 / 3-sided other models are for comparison only we produce CUSTOM SIZES, repair roll containers / rolling carts. Please inquire about specific heights. Side mesh in blue, back panel in blue, Rolling base in various colors ideally used as: Firewood cart; for yellow sacks; standard boxes such as E2 boxes, etc. with dimensions of 60 x 40 cm; transport cart, storage cart; shelving; etc. per roll container: Rolling base with 4 wheels, including 2 fixed and 2 swivel wheels; Rolling base / rolling plate in various colors; 2 side meshes, 100% in good condition + back panel incl. 4 connecting clamps & screws Weight: approx. 27 kg/rolling cart This offer includes only the roll container with a height of 155 cm. Other rolling carts are not included in the offer (for inspiration only). Price per piece: €69.00 plus the currently applicable value-added tax. Price applies per piece for an order of 1 roll container. Inspection possible by telephone appointment. Item is in good optical and technical condition (general overhaul). Extremely stable & can support up to 500 kg. PICKUP is possible after notification from WAREHOUSE 47441 MOERS. (Due to large stock levels, the goods can be inspected on site.) Due to time constraints, questions about this item can only be answered if you provide your telephone number. If you would like shipping, please contact us before purchasing to discuss shipping costs. Dodpfx Aasd Syhgshekp Photos are similar.

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Dkedpfxszf Id Sj Aahop Number of processing units: 5 Number of panel dividing/milling units: 1 Number of edge processing units: 4 Adhesive system: EVA hot melt adhesive The machine consists of the following processing units: Panel dividing/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Capping Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Overpressure Pressure with idler rollers Panel support guides Edge roller magazine Adhesive pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Dedjzf Ibwjpfx Aahskp Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: good (used), Holac AU125 dicer, direct from meat factory. Good condition. Dodpfx Aoqv Ezkjahskp

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, The pick-up deadlines specified in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working area, X-axis: 3,000 mm Working area, Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units, Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units, Unit 2 (bottom) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles, Unit 1 (top) Number of controlled axes: 3 Dedpfx Aaszf Ibdohekp Motor power: 4.5 kW Milling spindles, Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Grooving units Number of grooving units: 2 Grooving units, Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Grooving units, Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode scanner (manufacturer: SICK) CE marking Protective grating Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! Dodpfozf H Szsx Aahskp The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at its destination. External Reference: 8580

Condition: refurbished (used), Two stage cheese cutter for blocks of Cheddar, Mozzarella or Gouda cheese Load through side door on roller conveyor First cut pushed upwards on air ram through wire cutting frame Dksdpfx Astuuzboahsp Second cut pushed horizontally through 2nd wire cutting frame Cut pieces discharge along a roller convetor

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. Dsdpozf H R Rsfx Aahskp External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! Dkodpszf H Nyofx Aahsp TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Year of construction: 2001, condition: repair required (used), functionality: not functional, machine/vehicle number: 5206/6, For sale is a Bilwinco multihead weigher. 14 heads. Needs repair. Not running. No vibrating plate. Dkjdpev Sarlefx Aahjp

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Djdpfozf H Nmex Aahekp Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Dkodpozf H Iiofx Aahjp Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: excellent (used), Kortho Graphicjet X-18 inkjet printer High-resolution inkjet printer for absorbent and smooth surfaces The most advanced hi-res inkjet for 18mm high prints Launched in 2015, the X-Series Graphicjets are Kortho's latest and most advanced hi-res inkjet printers. Machine-wise, the X-Series printers with their capillary ink system are a further development of our proven 18P. However, the X-Series printers have a Windows operating system. In addition, its Nicelabel Windows driver makes it possible for this printer to print directly from any Windows software or ERP system. The X-Series has an 8″ color touch screen with integrated label management and design functions. This eliminates the need for external devices or connections during standalone operation. Additionally, this printer can print at speeds of up to 60 meters per minute, up to 120 m/min at lower resolution. Features of the Kortho Graphicjet X-18 Inkjet Print area of 18 x 1000 mm Resolution of 185 DPI Print speed of up to 60 meters per minute (at full resolution), up to 120 m/min at lower resolution Coding on cardboard (boxes), paper and many other absorbent materials A compact print head housing and 60 cm supply cable ensure easy installation Its non-pressurized capillary ink system ensures that this printer is not affected by changing environmental conditions Oil-based inks and mineral oil-free inks available User-friendly 20 cm TFT touch screen in any language you want Starts up within seconds Extensive graphics, text and barcode functions Windows-based operating system Equipped with Windows driver for network integration Equipped with Ethernet connection and USB ports Djdpfx Ajtpwt Ioahekp 100% NiceLabel compatible On-screen label design and management software (no external device required) Low consumption costs and low maintenance Longest service life and reliability on the market Made from the best materials (such as stainless steel) Serialization option via variable printing and bidirectional communication with ERP system CE certified Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Saw unit 1 (tiltable) Motor power: 6 kW Saw unit 2 (tiltable) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm Dodpfx Aajzf H Hrjhokp MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before pick-up and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8572