Double-acting hydraulic cylinder, hydraulic piston rod

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 3 kg, arm reach: 1,130 mm, No minimum price – guaranteed sale to the highest bidder! Auction of two ABB IRB 360 (Flexpicker) robots including vision system! TECHNICAL DETAILS Payload: 3 kg Working area diameter: 1,130 mm Fjdpfoznh T Eex Akvepk Positional repeatability: 0.03–0.1 mm Path repeatability: 0.1–0.33 mm MACHINE DETAILS Weight: 120 kg Supply voltage: 200–600 V Supply frequency: 60 Hz Power consumption at maximum load: 0.477 kW Payload for pick-and-place cycle: 1 kg Ambient temperature: 0 to +45 °C Relative humidity: max. 95 % Noise level: < 70 dB(A) Emissions: EMC/EMI shielded Operating hours: 6,000 h

Condition: used, mileage: 175,605 km, power: 120 kW (163.15 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, Special equipment: Overhead storage in cab, hill start assist, 13-pin trailer socket, Audio 15 audio system (radio with color display), outside temperature display, cargo area ceiling light, wooden floor in cargo area, steering wheel (mechanically adjustable steering column), Becker MAP Pilot navigation system, cross member with integrated step, smoker's package, spare wheel with road tires, spare wheel holder under rear frame incl. jack, sliding door, left side cargo/passenger compartment, rear mud flaps, front mud flaps, seats in cab: twin passenger seat, seats in cab: comfort suspension seat, driver side, rear stabilizer, reinforced front stabilizer, auxiliary electric air heater. Fpedpouuwrwofx Akvok Further equipment: 3rd brake light, adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated turn signal, 74 Ah battery, brake assist, braking system with ABS+ASR, overhead roof lining in cab, lockable glove compartment, rear door (opening angle 180 degrees), high-roof panel van body, child safety lock, fuel tank: main tank 75 liters, full-length cargo partition, load securing/tie-down points, headlight range adjustment, model update, engine 2.1 l - 120 kW CDI CAT, wheelbase 3250 mm, low emissions according to Euro 6, sliding door right side cargo/passenger compartment, seatbelt system with warning system (driver's side), seat cover/upholstery: Lima fabric, steel wheels 6.5x16, Assyst maintenance interval display, heat-insulating glazing, gross vehicle weight 3.50 t. * VIN: WDB9066311P534300 * Accident front right * Net price Tel./WhatsApp:

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, load capacity: 12 kg, arm reach: 1,850 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 12 kg Reach: 1,850 mm MACHINE DETAILS Operating hours: 6,000 h Fjdpeznh Tfjfx Akvepk Scope of delivery: Robot + Controller + Control cabinet + Flex pendant and ProfiNet I/O Slave software

Condition: ready for operation (used), Year of construction: 2018, operating hours: 225 h, functionality: fully functional, overall weight: 160 kg, load capacity: 10 kg, arm reach: 1,420 mm, repeat accuracy: 0.04 mm, number of axes: 6, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a ProModulR cell! TECHNICAL DETAILS Reach: max. 1,420 mm Rated payload: 10 kg Rated additional load, carousel: 0 kg Rated additional load, swing arm: 0 kg Rated additional load, arm: 10 kg Rated total load: 20 kg Positional repeatability according to ISO 9283: ± 0.04 mm Number of axes: 6 Mounting area: 333.5 mm × 307 mm Range of motion A1: ± 170° Range of motion A2: -185° / +65° Range of motion A3: -137° / +163° Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° Axis speed A1: 220 °/s Axis speed A2: 210 °/s Axis speed A3: 270 °/s Axis speed A4: 381 °/s Axis speed A5: 311 °/s Fpjdpfx Akoznh Snevjk Axis speed A6: 492 °/s MACHINE DETAILS Protection class according to IEC 60529: IP65 Protection class robot hand according to IEC 60529: IP67 Ambient temperature during operation: 5 °C to 45 °C Ambient temperature during operation: 278 K to 318 K Mounting positions: Floor Ceiling Wall Any angle Weight: approx. 160 kg Operating hours: 225 h

Condition: used, 2,000 linear meters of structural profiles, U-shape Used, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 43 kg Negotiable price: €4.90 net/linear meter ex warehouse Available individually or in packs One pack consists of 20 pieces – approx. 93.4 linear meters Goods are in stock. Transport possible upon request. Inspection possible at any time by appointment. Further information available upon request. We have over 5,000 linear meters of pallet racking from numerous manufacturers in stock at all times. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top warehouse technology & heavy-duty racking, used & new Description: Are you looking to buy high-quality warehouse racking? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance projects, we offer a complete, all-round service package: 1. Flat-rate purchase: Purchase of commercial goods, equipment & complete stock including thorough clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Fpodpfx Aksulwiqevok Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and thorough handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 26,600 h, functionality: fully functional, machine/vehicle number: 1026106, overall weight: 57 kg, load capacity: 10 kg, arm reach: 1,101 mm, controller model: KR C4 compact, repeat accuracy: 0.02 mm, No minimum price – guaranteed sale to the highest bidder! The robot is currently installed in a testing facility. TECHNICAL DETAILS Maximum reach: 1,101 mm Maximum payload: 10.9 kg Repeatability according to ISO 9283: ± 0.02 mm Number of axes: 6 Range of motion A1: ± 170° Range of motion A2: -190° / +45° Range of motion A3: -120° / +156° Range of motion A4: ± 185° Range of motion A5: ± 120° Range of motion A6: ± 350° MACHINE DETAILS Fpedpfxjznh Rqj Akvok Controller: KR C4 compact Teach pendant: KUKA smartPAD Cycle rate: 140 cycles/min Movement sequence: 25 mm / 305 mm / 25 mm Test load: 1 kg Ambient temperature during operation: 0 °C to 45 °C Protection class according to IEC 60529: IP65 / IP67 Protection class in series according to IEC 60529: IP65 / IP67 Dimensions and weight Base area: 208 mm × 208 mm Weight: approx. 56.5 kg Mounting positions Floor Ceiling Wall Any angle Operating hours: 26,600 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 30S00738, Year of construction: 2013, operating hours: 8,506 h, load capacity: 7,000 kg, lifting height: 4,450 mm, construction height: 3,300 mm, fork length: 1,200 mm, empty load weight: 10,410 kg, TECHNICAL DETAILS Load capacity: 7,000 kg Lifting height: 4,450 mm Overall height: 3,300 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Standard Dimensions & Weight Dimensions (L x W x H): 3,550 x 1,980 x 3,300 mm Dead weight: 10,410 kg Transmission: Automatic Front tires: Superelastic Rear tires: Superelastic Fodpfx Aozmwmlskvspk Operating hours: 8,506 h EQUIPMENT 3rd valve 4th valve Full cabin Cabin heater Hydraulic line preparation

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: red, gearing type: mechanical, Year of construction: 2024, TITLE: NEW ROZZI BRAND 6-BLADE OCTOPUS FOR HANDLING SCRAP AND BULK MATERIALS WITH ROZZI HYDRAULIC ROTOR REF.: 22-ATT-33 YEAR: 2022 MODEL: RHG280D MTR.: 59482 WEIGHT: 470 kg LOAD CAPACITY: 1800 kg CAPACITY: 280 lt PIN HOLE: 3.30 cm The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. Fpjdpfx Aovm Et Djkvjk For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specializing in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter Fpsdpfx Akszmwcaovok 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, workpiece weight (max.): 200 kg, working width: 3,080 mm, working length: 1,560 mm, The following components of the machine have been renewed: Festo pneumatic system Brand new Labod control system Replacement of the Y-axis bearings TECHNICAL DETAILS Working area: 1,560 × 3,080 mm Sheet metal length through repositioning: max. 9,999 mm Hydraulic punching force: max. 280 kN Workpiece weight: max. 200 kg Positioning speed of the X-axis: max. 60 m/min Positioning speed of the Y-axis: max. 60 m/min Simultaneous positioning speed of the X and Y axes: max. 85 m/min Stroke rate with standard hydraulics: max. 250 strokes/min Stroke rate with quick hydraulics: max. 800 strokes/min Fpsdpfx Akezl Srasvsk EQUIPMENT BOSCHERT software Note: The machine has already been disassembled.

Year of construction: 2006, condition: excellent (used), Punching capacity in sheet metal with a tensile strength of 37 kg up to: 2 and 3 mm using various punching tools. Fedpfed D Ryfjx Akvepk

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). Fpedpfjzlxiljx Akvsk TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 16,584 h, load capacity: 6,590 kg, lifting height: 4,010 mm, construction height: 2,910 mm, fork carriage width: 2,000 mm, fork length: 1,800 mm, TECHNICAL DETAILS Load capacity: 6,590 kg Load center: 600 mm Lift height: 4,010 mm Overall height: 2,910 mm Fork length: 1,800 mm Fork width: 150 mm Fork thickness: 70 mm Fork carriage width: 2,000 mm MACHINE DETAILS Drive type: Internal combustion engine Mast type: Standard Dimensions and weight Fjdpozrgh Asfx Akvepk Dimensions (L x W x H): 3,550 x 2,000 x 2,910 mm Dead weight: 12,270 kg Front tires: Superelastic, 8.25-15 Rear tires: Superelastic, 8.25-15 Operating hours: 16,584 h

Year of construction: 1998, condition: good (used), machine/vehicle number: 4422758898019, Offer 22646 Fpjdpfx Akjmb U Slsvsk Hydr. profile and bar shears with notching device and hole punching machine Technical data: - Flat steel shear - flat steel - 400 x 16 mm - or: 300 x 18 mm - Section steel shear - L- and T-iron at 90° 130 x 12 mm - square steel / round steel 40 / 40 mm - notcher - with square notcher for sheets up to approx. 13 mm - notch depth approx. 70 mm - notch width approx. 52 mm - Hole punch - punching force approx. 60 t - throat 400 mm - stroke approx. 10 to 50 mm - punches in steel up to Ø 31 in 15 mm - material stop - div. 10 pcs. punch + dies - drive 400 V / 5,5 kW - space requirement W 1100 x H 2000 x D 1700 mm - weight approx. 2100 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,300 kg, power: 2 kW (2.72 HP), controller model: HBG 10, workpiece length (max.): 3,000 mm, bar passage: 60 mm, TECHNICAL DETAILS Workpiece length, max.: 3,000 mm Guide channel diameter: approx. 60 mm MACHINE DETAILS Fjdpfxezqcv Tj Akvspk Control panel: HBG 10 Drive power: 2 kW Weight: 1,300 kg