Tank plastic container

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain ITNC 530, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,300 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 600 mm Maximum speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain ITNC 530 Spindle operating hours: 14,000 h Coolant supply: 20 bar Input voltage: 29 V Dimensions & Weight Transport dimensions: 6,500 x 3,000 x 3,000 mm Total weight: 15,000 kg EQUIPMENT Documentation/Manual Speed adjustable in steps Chip conveyor Coolant filtration system Swinging operation, mountable wall Dcsdpfx Acjzhn Ayo Hsi Handwheel Measuring probe Tool changer

Condition: excellent (used), Stainless steel tank, 1000 liters Manufacturer: Willi Lermer, Wiesbaden Volume: 1000 liters Stackable 10 units available In very good condition, directly from production!!! Dcodolbiiaopfx Ac Hei

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, power: 52 kW (70.70 HP), screw conveyor diameter: 49 mm, machine/vehicle number: DE27566, TECHNICAL DETAILS Capacity: 150 – 250 kg/h Screw diameter: 2 x Ø 49.7 mm L/D ratio: 32D MACHINE DETAILS Motor power: 52 kW (DC) Control system: analog, contactor-controlled system Dodpfxjzd Scpe Ac Hjci EQUIPMENT Synchronous motor Degassing Vacuum pump

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 05 17 1994, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller model: Heidenhain TNC 415, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Travel range X-axis: 2,000 mm Dodpszha Inofx Ac Hjci Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,250 mm B-axis: 360° Table size: 1,600 x 1,800 mm MACHINE DETAILS Control system: Heidenhain TNC 415 Tool holder: SK 50 ATC: 60 Note: Angles are not included in the scope of delivery. The machine has already been disassembled.

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Dcjdpfx Acjw U Sw Ae Hji Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Tool holders Coolant preparation/filtration system Chip conveyor Dcedpfx Acozdtxfs Hei Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Dedpfx Aozdttpec Heci EQUIPMENT Tool changer

Condition: new, Year of construction: 2025, machine/vehicle number: 282897, fuel type: diesel, motor manufacturer: Yanmar 4TNV88-22G, General information Field of application: Construction Weights Empty weight: 520 kg Dcjdpfx Acoxpcwuj Hoi Functional Generator capacity: 22 kVA Dimensions of cargo space: 150 x 70 x 102 cm CE mark: yes Other information Fuel consumption: 3.7 L/Hour at 75% Load Generator: Mecc Alte ECP28-M/C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Emission level: Stage V / Tier IV final Water tank volume: 60 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Djdpfx Acszd Tcds Hsci Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 101.116, Year of construction: 2001, operating hours: 2,133 h, load capacity: 9,000 kg, lifting height: 3,000 mm, free lift: 200 mm, load center: 600 mm, mast type: duplex, TECHNICAL DETAILS Load capacity: 9,000 kg (up to 10 tons can be lifted temporarily) Lifting height: 3,000 mm Free lift: 200 mm Load center: 600 mm Overall height: 2,480 mm Fork length: 1,650 mm Fork width: 150 mm Fork thickness: 70 mm Turning radius (outer): 2,900 mm MACHINE DETAILS Fuel type: Gas Mast type: Duplex Engine manufacturer: Perkins Transmission type: Hydrostatic Power: 55 kW (74.78 hp) Engine speed: 2,300 rpm Front tire type: Solid rubber tires (non-marking) Rear tire type: Solid rubber tires (non-marking) Hydraulic tank: 120 liters Dcsdpfx Acjzd Sg Uo Hoi Operating voltage: 12 V Noise level: approx. 85 dB(A) Dimensions & Weight Length (to backrest): 3,050 mm Width: 1,550 mm Wheelbase: 1,950 mm Unladen weight: 14,500 kg Max. travel speed: 10 km/h Gradeability: 15% Operating hours: 2,133 h EQUIPMENT Trailer coupling Lighting CE marking Complete documentation including spare parts list Cabin Pallet forks Side shifter UVV (German accident prevention regulations) Hydraulically adjustable cabin Swivel column with telescopic boom Integrated winch AM/FM radio 3 switchable cameras with monitor Digital weighing system Pfreundt WK33 Joystick control Comfort seat Excellent all-around visibility

Condition: good (used), Used stainless steel pressure vessel Item number: 10471 Last application: Cosmetics Volume: approx. 750 liters Type: Standing on 4 rollers with galvanized forklift tunnel Material (in contact with the medium): 1.4301 stainless steel Design: Single-walled Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: +2.2 bar Dimensions of the vessel: Outer diameter: 980 mm Height of legs: 190 mm Distance from outlet to bottom: 180 mm Overall height: 1750 mm Overall width: 1170 mm Overall length: 1000 mm Materials: Dsdpfx Acjfdgrqs Hoci Inside: 1.4301 / AISI304 Outside: 1.4301 / AISI304 Equipment: Outlet: DN32 mm Outlet type: Ball valve Manhole: 355 mm Various connections Forklift tunnel

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 91045841, Year of construction: 2007, load capacity: 2,000 kg, load center: 600 mm, fuel type: electric, battery voltage: 48 V, TECHNICAL DETAILS Load capacity: 2,000 kg Load center: 600 mm MACHINE DETAILS Mast model: ZG 560DZ Drive type: Electric drive Battery voltage: 48 V Drive power: 6.0 kW Unladen weight without battery: 3,392 kg Battery weight: 890–984 kg EQUIPMENT Driver's seat Sensitive hydraulics Very maneuverable Ideal for high-bay warehouses Robust Jungheinrich technology Precise control Djdpfjzd Rukox Ac Hoci

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,976 h, load capacity: 2,700 kg, lifting height: 8,000 mm, mast type: triplex, TECHNICAL DETAILS Lifting height: 8,000 mm Dodpfxszd Rr Ne Ac Hjci Load capacity: 2,700 kg Load capacity at 8,000 mm lifting height: 2,200 kg at a 400 mm load center 1,900 kg at a 500 mm load center 1,700 kg at a 600 mm load center MACHINE DETAILS Mast type: Triplex Mast model: TXH8000 Electric drive: 48 V Battery weight: 1,100–1,200 kg Weight without battery: approx. 3,560 kg Operating hours: 4,976 h EQUIPMENT Electric reach truck 4-way system for long loads Comfort seat Joystick control Suitable for high-rack warehouses Toyota quality vehicle Direction of travel: forward / backward / sideways Stand-on forklift Hydraulic fork adjustment 360° steering

Condition: excellent (used), Year of construction: 2023, fuel type: diesel, motor manufacturer: Kubota Z482, Field of application: Construction Empty weight: 1.010 kg CE mark: yes Technical condition: very good Visual appearance: very good Voltage: 48 Delivery terms: EXW Transport dimensions (LxWxH): 2,25x1,4x2,44 Please contact Christian Theißen for more information Manufacturer: Generac Model: V20 Year of build: 2023 Condition: Used Data: Performance: 4x300W Low Voltage: 48 Volt Lamp type: LED Max. height: 8,50 m Engine: Kubota Z482 Alternator: Linz Drive type: Diesel Luminous life with one full tank: 140 Hours Operating noise: 58 dB(A) Transport dimensions: 2,25 x 1,40 x 2,44 m Dimensions when set up: 2,64 x 1,90 x 8,50 m Own weight: 1010 kg Special features: Digital controller, 3 doors, RLS, stabilizers with quick locking Dedpfx Acoxl Uhqj Hoci Location: 41468 Neuss: immediately available

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, grinding length: 4,000 mm, grinding width: 500 mm, spindle speed (max.): 1,400 rpm, overall weight: 11,000 kg, TECHNICAL DETAILS Max. grinding length: 4,000 mm Max. grinding width: 500 mm Max. distance between table and spindle center: 900 mm Table speed: 3 - 25 m/min Spindle speed: 1,400 rpm Grinding spindle motor: 11 kW Dimensions of magnetic clamping plates: 4 x 1,000 x 500 mm Dcedpfxjzd Rqls Ac Hji MACHINE DETAILS Weight: approx. 11 tons EQUIPMENT Including complete electrical system Permanent magnet plate Cast iron bed (overhauled in 2011) New hydraulics and digital Z-axis Swiveling spindle