ARIANA R3000 maintenance system

Condition: used, machine/vehicle number: 91132839, Year of construction: 2018, operating hours: 9,548 h, No reserve price – guaranteed sale to the highest bidder! Note: The forklift was inspected after relocation. As the necessary transponders are missing, a complete inspection could not be performed. The following defects are known: - Seat locking lever broken off - Switch on steering wheel defective - Left side cover deformed - Access module damaged – button defective - Transponders missing The forklift has already been dismantled for transport. MACHINE DETAILS Operating hours: 9,548 h The following technical data is taken from a manufacturer’s data sheet (attached). The seller cannot guarantee its accuracy: TECHNICAL DETAILS Load capacity: 1,600 kg Load center distance: 600 mm Load distance: 401 mm Load distance, mast extended: 215 mm Wheelbase: 1,410 mm MACHINE DETAILS Total weight: 3,438 kg Axle load without load front/rear: 2,292 / 1,146 kg Axle load with load, forks forward front/rear: 902 / 4,132 kg Axle load with load, forks back front/rear: 2,024 / 3,014 kg Tyres: PU Tyre size front: Ø 343 x 114 mm Tyre size rear: Ø 285 x 100 mm Wheels, front/rear: 1x / 2 Itsdpfx Asy Nzl Tebxsg Rear track width: 1,168 mm

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. Itjdodzqw Iopfx Abxeg The maximum operating temperature is 80 ° C.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 11,206 h, functionality: fully functional, machine/vehicle number: 20170708, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 18,000 rpm, The machine underwent maintenance in April 2025, during which the rotary union was replaced at a cost of €8,600! TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 830 mm Travel Z-axis: 600 mm Swivel range A-/C-axis: approx. -100 to +120° / -120 to +120° C-axis rotation range: 360° Table diameter: 800 mm T-slots (number x width): 9 x 90 mm Maximum table load: 1,200 kg Kessler spindle: 18,000 rpm Maximum tool length: 300 mm Isdpey I Tvnofx Abxotg Maximum tool diameter: 75 mm Maximum tool diameter (with adjacent stations empty): 125 mm Maximum tool weight: 7 kg Tool change time: 3 s Rapid traverse X/Y/Z: 60 m/min Max. A-axis speed: 50 rpm Max. C-axis speed: 100 rpm Acceleration X/Y/Z: 7 m/s² Repeatability: 0.004 mm Positioning accuracy: 0.008 mm Rotational drive system: Integrated direct drives Tool holder: HSK 63 Tool stations: 96 MACHINE DETAILS Control: Heidenhain 530 Dimensions & Weight Weight: 19,000 kg Layout with accessories (L x W x H): 4,150 x 5,000 x 3,500 mm Tank capacity: max. 330 l Total coolant capacity: max. 425 l Operating Hours Control on-time: 20,248 h Machine on-time: 19,424 h Program run: 11,331 h Spindle hours: 11,206 h EQUIPMENT Spindle chiller Kessler swing, 800 mm turning diameter, fully utilizable with zero-point clamping system Note: The touch probe is not included in the offer. The holders, however, are part of the offer.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: KMM 540.1196, travel distance X-axis: 3,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 15 M, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 06/06/2026! Isdsy Rl Alspfx Abxjtg TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 550 mm Travel Z-axis: 550 mm MACHINE DETAILS Control: Fanuc 15 M Rotary axis: Fibro NC1

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Itodpfx Aex U Exusbxsg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected while powered on until May 4, 2026! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously maintained by Trumpf and has a complete service record. The cylinders are sealed and have no oil leaks. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Itodoy Hqc Njpfx Abxjg Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam operating time: 15,396 h Hydraulic operating time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning BendMaster (Robot with 8 m travel path) Vacuum manipulators CNC gripping station Double sheet detection BendGuard LaserSafe safety device Spare parts: Cable track, spare vacuum plate, BWF fixators (machine feet)

Condition: defective spare-parts repository (used), Year of construction: 2011, functionality: not functional, laser power: 6,000 W, laser source model: TruFlow 6000, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connected load: 114 kVA Isdey Hqahepfx Abxotg Mains connection: 400 V Control voltage: 24 V Fuse protection: 200 A Compressed air connection: 6 – 14 bar Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm

Year of construction: 2018, condition: new, For sale is a first einal user magnetic filter. Isdpfx Absdzp R Toxotg Sealed 9 PCs Magnetfitlerstäbe, including Reinigugnsfunktion.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Iodpfxsy Nmxxo Abxjtg Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, No reserve price – guaranteed sale to the highest bidder! The machine was last overhauled in 2024! TECHNICAL SPECIFICATIONS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm EQUIPMENT Service and inspection history dating back to 2019 Itjdpfx Asy Nkzqsbxeg

Condition: used, Year of construction: 2010, machine/vehicle number: AT91, Used CIP Tetra Pak year 2010 15T/h The Used CIP Tetra Pak year 2010 15T/h, model Tetra Alcip 1, performs Cleaning in Place (CIP) to automate the cleaning process in bottling and food processing plants. Consequently, this system ensures an effective sanitation cycle without requiring production line disassembly, optimizing downtime and reducing water and detergent consumption. Tetra Pak built the Used CIP Tetra Pak year 2010 15T/h in 2010. Specifically, its 15-ton-per-hour operational capacity makes it suitable for high-productivity plants while ensuring hygiene standards that comply with food and beverage industry regulations. Technical Features of the Used CIP Tetra Pak year 2010 15T/h The Tetra Alcip 1 applies a controlled washing cycle to remove organic and inorganic residues from production circuits. In particular, the system integrates separate tanks for water, alkaline detergent, and acid, and it automatically regulates temperature, chemical concentration, and washing time based on plant requirements. As a result, it enhances the efficiency of cleaning operations. Moreover, the Used CIP Tetra Pak year 2010 15T/h automates the cleaning process, reducing cross-contamination risks and improving production efficiency. Additionally, the system allows operators to configure different washing parameters, which enables adaptation to specific production needs and ensures thorough cleaning of filling lines, pipelines, and heat exchangers. Safety and Process Control Isdpfxswga Iue Abxjtg The system includes advanced safety features, such as: Sensors that continuously monitor detergent concentration. Temperature and pressure controls throughout the cleaning cycle, ensuring optimal performance. Alarm systems that detect and manage sanitation process anomalies, thereby preventing potential failures. As a result, these features ensure this Used CIP operates reliably, minimizing operational errors and optimizing water and chemical consumption. Furthermore, the system’s automated monitoring enhances safety while reducing maintenance requirements. Operational Advantages Using this Used CIP Tetra Pak  enhances plant productivity in multiple ways. First and foremost, it reduces downtime: the continuous washing system completes fast cleaning cycles without requiring component disassembly. Moreover, it optimizes resource usage: the automatic detergent dosing system prevents chemical waste. Additionally, it ensures regulatory compliance: the system meets high hygiene standards and complies with industry regulations. At the same time, the automated nature of this system helps manufacturers streamline their cleaning procedures. Consequently, businesses benefit from both improved production continuity and reduced operational costs. Likewise, the ability to customize cleaning parameters provides greater control over sanitization processes. Conclusion In summary, this Used CIP Tetra Pak provides an efficient and reliable solution for sanitizing bottling and food production plants. Since its design prioritizes automation, this system minimizes manual intervention while maximizing operational efficiency. Furthermore, its advanced safety features ensure maximum hygiene and productivity in the beverage and liquid food industry. Ultimately, adopting this system allows companies to maintain high sanit...

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, controller model: Fanuc 32iTB iHMI, counter spindle speed (max.): 4,500 rpm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Ijdpfx Abjy Hk Nioxjtg Distance between centers: 689 mm Distance between chucks: 625 mm Travel in X-axis: 310 mm Travel in Z-axis: 640 mm Travel in Y-axis: +70/-50 mm Travel in B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Maximum spindle speed: 3,500 rpm ASA 8" A2 Maximum counter-spindle speed: 4,500 rpm ASA 6" A2 Spindle bearing outer: 200 mm Spindle bearing inner: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool positions: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 42,654 h Total running hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine weight: 6,500 kg Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Itjdpfx Aboy Hk E Rexeg Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: good (used), Flushing pump for nozzle cleaning of Lisec sealing systems. Dimensions of the product: Length: approx. 500 mm, width: approx. 500 mm, Iedpfx Aoqc Ukhjbxstg height: approx. 1000 mm, Weight: approx. 50 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Ijdpfxey Nc Rws Abxotg Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)