VERTICAL TANK 35000L

35

Operating hours: 14,081 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast Lifting height: 4,450 mm Fork length: 2,000 mm Side shifter: present 3rd hydraulic valve: present 4th additional valve: present, free for fork positioner Free-lift mast: without central hydraulic cylinder Tilt angle indicator: present Drive and Performance Drive type: LPG Load capacity: 3,500 kg Operating hours: 14,081 h Inspection and Maintenance UVV valid until: 05/2027 Next service due in: 420 h MACHINE DETAILS General Manufacturer: Linde Type: H35T EVO Year of manufacture: 2019 Own weight: 5,030 kg Dimensions Overall length: 4,800 mm Overall width: 1,350 mm Overall height: 2,964 mm EQUIPMENT Full cabin with heater and windshield wiper LED work light front LED work light rear Safety Light rear Safety Light side Comfort seat with lumbar support Seat heating All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 189 Laodpfez R Dzpjx Albeh

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Capacity 1000 Lts Complete with Winkworth mixer and ancillary equipment Laedpfowq Sdiox Albeh

Year of construction: 2021, operating hours: 17,634 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift Mast Mast type: Duplex mast Lift height: 5,495 mm Free-lift mast: Without center hydraulic cylinder Free lift: No Load Capacity and Forks Load capacity: 3,500 kg Fork length: 1,200 mm Hydraulically adjustable forks: Yes Side shifter: Yes Lasdpfx Aoz R Dqwjlboh Drive Drive type: LPG (liquefied petroleum gas) Diesel drive: No MACHINE DETAILS Machine data Manufacturer: Linde Type: H35T Year of manufacture: 2021 Operating hours: 17,634 h Self-weight: 5,516 kg UVV certificate valid until: Formerly a Linde full-service unit Facelift model Dimensions Overall length: 5,200 mm Overall width: 1,450 mm Overall height: 3,424 mm EQUIPMENT 3rd and 4th hydraulic valve Fork positioner with side shifter Full cabin Air conditioning Heater Windshield wiper Comfort seat with lumbar support Seat heating LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety light, front Safety light, rear All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 45

Condition: used, machine/vehicle number: H2X393V02496, Year of construction: 2019, operating hours: 17,217 h, load capacity: 3,500 kg, lifting height: 4,450 mm, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,450 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast Operating type: LPG Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,350 x 2,964 mm Self-weight: 4,900 kg UVV certificate valid until: 04/2027 Next service due in: 388 hours Operating hours: 17,217 h EQUIPMENT Former Linde full-service unit Free-lift mast without center hydraulic cylinder Multi-directional fork positioner Side shifter Full cab Radio Heater Windshield wiper LED work light (front) LED work light (rear) Lodpfjz Nwugsx Alboah Safety light (rear) Safety light (side) Comfort seat with lumbar support Seat heating Display of the tilt angle LPG gas exchange cylinder Hydraulics: 3rd + 4th valve All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 166

Condition: excellent (used), Year of construction: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-Axis CNC Turning Center with Ljdpoxz Ab Refx Albsah automatic tool changer, Y-axis and B-axis, for complete machining of turned-milled parts. Integrated spindle motors (ISM) on main and sub-spindle with thermocompensation system (liquid cooled). Drive power: Main spindle - 29 kW Sub-spindle - 22 kW Speed range: Main spindle 0-5000 rpm Sub-spindle 0-7000 rpm Spindle interface (DIN 55026): Main spindle KK 6 (bore 65 mm) Sub-spindle KK 6 Y-axis: travel range +/- 50 mm The Y-axis is designed so that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guides in all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control technology, includes: * Hollow clamping cylinder incl. draw tube * Part ejector and coolant supply through the sub-spindle * 12-position VDI 30 radial tool turret with directional logic for up to 12 driven tool stations Swivel speed adjustable with feed switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for main and sub-spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished parts * Sinumerik 840D * Chip conveyor with a programmable discharge height of 1200 mm (hinged belt type) * Coolant system integrated in the chip conveyor: 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine lamp * Interface for foot switch * Documentation Included: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Swing-out window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Condition: used, machine/vehicle number: 517388V00095, Year of construction: 2019, operating hours: 6,982 h, load capacity: 3,500 kg, lifting height: 4,500 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,500 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive: LPG Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,200 x 2,250 mm Ledpfxjz Nwbtj Albjah Weight: 5,017 kg Next service due in: 901 hours UVV certificate valid until: 07/2027 Operating hours: 6,982 hours EQUIPMENT Former Still full-service unit Fork positioner with side shifter Semi-cab with windshield wiper LED work light (front) LED work light (rear) Orange warning light Comfort seat LPG gas cylinder with quick-change system Hydraulics: 3rd and 4th auxiliary valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 148

Condition: used, machine/vehicle number: H2X388H00203, Year of construction: 2017, operating hours: 11,137 h, load capacity: 3,500 kg, lifting height: 4,100 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 4,100 mm Mast type: Duplex mast Free-lift mast: Without central hydraulic cylinder Fork length: 1,200 mm MACHINE DETAILS Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery voltage at rest: 85.0 V Operating hours: 11,137 h Dimensions & Weight Dimensions (L x W x H): 4,000 x 1,500 x 2,904 mm Service valid until: 07/2027 EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Fork positioner Side shifter Full cabin Heater Windshield wiper White, non-marking tires LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lasdjz Npb Ejpfx Alboh Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected within the specified time. Any outstanding storage fees must be paid in full before collection. Lot number: 77

Year of construction: 2006, condition: ready for operation (used), Output: 400 loaves/h, including accessories and spare parts. Lasdoh T A Trspfx Albsh

Condition: used, machine/vehicle number: H21202Y00369, Year of construction: 2021, operating hours: 16,945 h, load capacity: 3,500 kg, lifting height: 5,495 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 5,495 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Duplex mast Drive type: LPG UVV certificate valid until: 09/2027 Next service due in: 853 hours Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,450 x 3,424 mm Own weight: 5,523 kg Operating hours: 16,945 h EQUIPMENT Facelift model Former Linde full-service unit Duplex free-lift mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Full cabin Air conditioning (AC) Cabin heater Windshield wiper LED work lights front and rear Road traffic lighting with turn signals for road approval Orange warning light Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Ledpfx Ajz Nn A Uelbjah Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 40

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Lajdozrptnopfx Albeh Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Lsdpfx Aoyhbt Hjlbsah Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: good (used), functionality: fully functional, machine/vehicle number: ZFA250006SG028395, mileage: 37,885 km, power: 103 kW (140.04 HP), first registration: 08/2025, fuel type: diesel, empty load weight: 2,255 kg, maximum load weight: 1,245 kg, overall weight: 3,500 kg, next inspection (TÜV): 10/2028, fuel: diesel, energy efficiency: A, color: white, gearing type: automatic, emission class: euro6e, number of seats: 3, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Year of construction: 2025, number of previous owners: 1, Equipment: ABS, Android Auto, Apple CarPlay, EBS, USB port, additional headlights, air conditioning, airbag, all-season tires, blind spot assist, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, immobilizer system, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking sensors, power assisted steering, power mirror, rear view camera, second-hand vehicle warranty, sliding door, soot filter, tire pressure monitoring, traction control, truck registration,

Condition: good (used), mileage: 254,386 km, power: 96 kW (130.52 HP), first registration: 06/2019, fuel type: diesel, tire size: 215/75R16, axle configuration: 4x2, wheelbase: 4,040 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 6,850 mm, total width: 2,140 mm, total height: 3,310 mm, loading space length: 4,320 mm, loading space width: 1,980 mm, loading space height: 2,310 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control,

Condition: used, Aluminum silo (plastic granulate silo) resting on a base ring – used – designed for a bulk density of 0.8 kg/dm³ Volume: 50,000 liters Manufacturer: EVS Available quantity: 1 Diameter: approx. 3,500 mm Lsdpfjww Em Dsx Alboah Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Angle of the upper base: 15° Angle of the cone: 90° Equipment and connections: In the upper base: 1 x access hatch DN 600 with hinged cover 1 x vent 1 x roof edge railing with handrail 2 x crane lugs 1 x flange for filling line 1 x block flange for measuring and control technology On the shell: 1 x access door approx. 870 x 1,960 mm Various pipe support brackets for the filling pipe 1 x filling pipe DN 80 1 x nozzle for level indicator Otherwise, as per the images and drawing.

Condition: good (used), mileage: 564,500 km, power: 324 kW (440.52 HP), first registration: 02/2015, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,600 mm, fuel tank capacity: 400 l, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, Equipment: AdBlue, air conditioning, central locking, crane, electric window regulation, fog lights, navigation system,