Peeler for potatoes and vegetables

Limas AB, Quiel GmbH, VEB, Rewa 8260, SFRV5, 83Z

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Wyma Vegetable peeling/polishing line. To consist of; Dolav bin tipper Wet hopper Vege-peeler with Auger (can have the auger removed for just polishing) Roller inspection table Bwedpezaa Iyofx Aknew Water recycling unit All machinery is stainless steel. Machinery is decommissioned and ready for shipping

Year of construction: 2009, condition: good (used), functionality: fully functional, Production of 2000 kg/day (6h) Composed of: URBASA Q908.010b slicer MARRODAN PR32318 B/T elevator to load scalder. With PVC/Polyurethane 3C 500 band with studs. overall length: 3000mm. useful width: 500mm. Power 0,37 Kw MARRODAN PR32217 Linear mesh scalder, for vegetable products. The regulation of the scalding/hydrating system is carried out by means of a temperature controller connected to a PT100 probe. The forward speed is regulated by a frequency variator. Basic construction in AISI 304 STAINLESS STEEL Polypropylene mesh type A-1061mm Total installed power: 4.7kW Group of 2 pulping machines and 250-litre heated tanks for mixing and cooking INOXPA HYGINOX SE centrifugal pump of STAINLESS STEEL, driving the product to exchanger. UNICUS type HRS dynamic heat exchanger with scraper device to increase the heat transmission coefficient AVAILABLE DOCUMENTATION Bsdpfov Ivcxex Aknjww

Condition: used, Yamato 714 Multihead Weigher Fully Stainless Steel | Rigidized | Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments. Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products. Bwodpox Ifbijfx Aknew The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation. ----- Specifications – Yamato 714 Weighing Heads - 14 heads Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible Speed - Up to 90 weighings per minute (product dependent) Chute Type - Flat chutes (ideal for frozen/hard products); angled chutes available Controller - Optional upgrade to RCU810A (color touchscreen) Build Material - Fully stainless steel, rigidized/dimple-plated finish Condition - Fully serviced and reconditioned – ready to run Applications - Frozen products, meat, seafood, hard candy, root vegetables, and more Product Size - Handles medium to large items (depending on setup) Highlights - Durable rigidized finish minimizes product sticking - Optional RCU810A controller for intuitive operation - Ideal for harsh environments (cold rooms, frozen packaging lines) - Alternative units available for soft/fresh produce (angled chutes) - In stock now – fast delivery possible! ----- 📦 Available Immediately 📍 Inspected and ready at our facility 📞 Contact us for pricing, viewing, or more details!

Condition: like new (used), Eillert C25 H Potato rumbler Bwodshpqqmopfx Aknow Serial: 4149308 Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

Year of construction: 2020, condition: like new (used), Our Dornow potato peeling line is for sale, consisting of: Potato peeler with knives 20M-AT-MS Roller inspection table Pre washer with transporter conveyers Preserving and bagging device Vacuum sealer Extra sets of brand new blade for peeler included This line can also peeling beetroots, celery and if you keep peeling cycle longer also carrots For additional monies we can add it: (slicer, metal detector, Storage bunker with conveyor belt (capacity approx. 1t raw material).. Subject to request) The peeling line runs automatically in sequence: The pot peeler is filled by the conveyor belt from the storage bunker after a continuously adjustable time. The peeler peels the potatoes for the infinitely variable preset time and then ejects the peeled product onto the inspection table and the sequence starts again. Depending on the quality and size of the potatoes, the system peels approx. 300 - 1000 kg of raw product per hour The pot peeler peels with minimal water consumption using a flat jet from a nozzle. Kobhyc I Hovdvmpecedl Pot peeler capacity approx. 40 kg raw material, optimum filling quantity for good peeling results approx. 25 kg Inspection table with removable tuber rinsing device Storage capacity in the water bath canning and bagging unit approx. 120 kg of peeled goods. Bwodjw R T Dijpfx Aknsw Preserving and bagging unit with discharge belt and dosing belt for the scale as well as draining section and air and water rinsing nozzles. Single chamber vacuum sealer dimensions chamber: 600x400mm, vacuum pump capacity: 60m³/h Year of construction 2020, in use until August 2023. In very good condition and fully functional. Can be inspected on site by arrangement.

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. Bodpfsv Di Dnjx Aknsww You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Year of construction: 2018, condition: used, 2018 Kronen KUJ cube, strip and slice cutting machine – used Cube, strip and slice cutting machine with infeed conveyor for vegetable and fruit processing. This KUJ is a used cutting machine from Kronen, built in 2018 in Kehl, Germany. It cuts cubes, strips and slices and is made of stainless steel. An inclined cleated infeed conveyor with a wide loading hopper carries the product up to the cutting unit. The cutting unit stands on swivel castors, so it can be moved between workstations, while the conveyor rests on adjustable feet. An emergency stop is fitted at the side of the conveyor. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full specifications: / Machine type: Cube, strip and slice cutting machine Bwodpfxez H Ax Ds Aknew Condition: Used Cutting types: Cubes, strips and slices Infeed: Inclined cleated conveyor with wide loading hopper Mobility: Cutting unit on swivel castors; conveyor on adjustable feet Safety: Emergency stop on the conveyor Construction: Stainless steel Origin: Kronen, Kehl (Germany)

Condition: used, Urschel RA A Dicing Machine The Urschel RA A multifunctional dicer is widely used across many food production processes. Whether slicing, strip cutting, French fry cutting, julienne, or dicing, this Urschel machine is capable of handling a wide range of cutting applications. This dicing machine is a highly efficient slicer with a high production capacity. The RA A model is equipped with a frequency converter, allowing soft products to be cut without damaging their structure. It effortlessly processes both hard and soft products such as potatoes, carrots, cucumbers, radishes, onions, peppers, tomatoes, zucchini, pears, apples, broccoli, melons, and citrus fruits. The cutting size can be adjusted using interchangeable cutting sets. The machine is mounted on wheels, allowing for easy relocation within production facilities. It is constructed entirely from stainless steel, ensuring durability and hygiene compliance. Technical Specifications - Production capacity: up to 3,000 kg/h (depending on product type and cut size) - Maximum product size: up to 88.9 mm - Cutting sizes: Slices (adjustable): 1.6 – 9.5 mm Circular knives: 3.2 – 25.4 mm Crosscut knives: 3.2 – 38.1 mm Supplied cutting set: 4 mm × 4 mm - Infeed height: 1,780 mm - Discharge height: 630 mm Bwsdpfxezcrf As Aknsw - Voltage: 400 V (3+N, 50 Hz) - Power: 3.7 kW - Weight: 365 kg - Machine dimensions (W × D × H): 1,020 × 1,300 × 1,920 mm

Condition: excellent (used), Urschel RA-D Dicer/Cutter/Slicer Height: 2000 mm Bwjdpey Akq Sofx Aknjw Width: 1150 mm Length: 1000 mm Power supply: 400V 50Hz 3N Total power: 3.7 kW Stainless steel Included cutting blade sets: 4 / 8 mm

Condition: excellent (used), FAM ILC-3D Linear Dicer / Cubing Machine – Stainless Steel FAM ILC-3D industrial dicer/cubing machine, designed for continuous three-dimensional cutting of food products into cubes, strips, and other regular shapes, depending on the installed blade set and cutting dimensions. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-3D is designed to produce a uniform end product through a sequence of cuts in different directions. Its configuration is particularly suitable for lines where precision, size regularity, and continuous production are required. Its construction, primarily in stainless steel, feeding system, and interchangeable cutting unit allow it to be used in industrial plants processing fruits, vegetables, and other food products. MAIN FEATURES -Manufacturer: FAM -Model: ILC-3D -Type: Industrial three-dimensional dicer/cubing machine -Continuous cutting system -Cutting in 3 dimensions -Production of cubes/dices -Possibility of obtaining strips and other shapes depending on tooling -Continuous product feed -Multi-stage cutting system -Interchangeable blade sets -Cutting dimensions determined by the installed tooling -Electric motor drive -Construction primarily in stainless steel -Protected cutting chamber -Robust construction for industrial use -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The product is continuously fed into the FAM ILC-3D and guided towards the cutting unit. In a typical cubing configuration, the product passes through a sequence of elements that perform the necessary cuts in different planes, ultimately producing cubes of regular dimensions. The final size and geometry depend on the combination of blades, cutting guides, and transverse cutting elements installed in the machine. It can be used for: Cubing in 3 dimensions Cutting into strips Uniform product cutting Pre-processing before cooking or blanching Preparation for IQF freezing Preparation for canning Dosing and subsequent packaging APPLICATIONS Particularly suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and producers of prepared meals who need to obtain uniform cuts on an industrial scale. Depending on the tooling and the characteristics of the product, it can process potatoes, carrots, onions, fruits, vegetables, and other food products suitable for mechanical cutting. The FAM ILC-3D offers a versatile solution for industrial lines where continuous cubing, uniformity of the final product, and the ability to adapt cutting dimensions using different blade sets are required. Machine available for inspection. Bwodpjzxlgqefx Aknow Additional technical information, dimensions, blade configurations, additional photographs, or videos can be provided upon request.