Parquet production line

LEDINEK ROTOLES 400 D - S

Condition: new, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl Kodpfx Ajxd Hwnsh Noll · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Kledpfxsw Nbace Ah Nel Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm

Condition: used, A.COSTA LEOPARD multirip saw with double arbor - Max cutting depth: 200 mm - Width of track: 350 mm - 2 x 55 KW / 75 HP Klodpfevf Dagsx Ah Nel - Weight: around 5 tons

Condition: good (used), functionality: fully functional, Complete plywood manufacturing line including: 1 BUERKLE compounding line year 1991 with BUERKLE roller gluer length 3400 mm + 1 OLM long-wire sender + 1 OLM cross-wire sender + 1 assembly table. 1 press loading basket with 10 positions. 1 BVH 10-stage press with thermal oil heating platens. - Platen size: 3700 x 1900 - Platen thickness: 40 mm - Opening between platens: 75mm - 1 central cylinder D700 mm, max. hydraulic pressure 315 Kg/cm². 1 press unloading basket with lateral evacuation pushers on lifting table. Kledpfjul Uizjx Ah Nol Line currently in operation, available second half of 2025.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Klsdpfxev Umb Ej Ah Nel Viewings are available by appointment.

Condition: used, Year of construction: 2014, Power Control PC 22 with WoodWop software - POWERTOUCH Panel height mm 8 - 60 Pvc/Abs mm 3 Feed speed up to mt/min 25 (with rounding 20 mt\min) Working height electronically adjustable by N.C. Motorized rubberized belt with upper pressure Panel support guide and easy introduction for small panels Controlled infeed guide Anti-adhesive group Rectifying group with two KW 3 motors each, 9000 RPM Reel magazine Gluing group for PUR glue with pre-melter and glue tank Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C. End trimming unit with 2 motors (automatic tilt adjustment?) Overlapping trimming unit with 2 motors Rounding unit with 2 multifunction motors (cornering unit + rounding unit) with NC adjustment Edge scraping unit Glue scraping unit Brushing unit Anti-stick unit TECHNICAL DETAILS TO BE CHECKED Klodpfxovqbh Ej Ah Njl

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Ksdpfx Ahjw Dp Ufo Nsll Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top Kedpfx Aoh Dwl Dsh Nell TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Opening side up to 3000 mm Ksdpfsvx Afnsx Ah Nsll

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Kedpehw Ng Iefx Ah Nsll Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device