Industrial robots – over 300 units in stock

KUKA KRC 2 KCP 2 Komplett Roboter

Condition: good (used), Year of construction: 2015, functionality: fully functional, Machine from the Munich metropolitan area Hermle C 42 U with RS 2 automation / robot Year of manufacture 2015, Heidenhain iTNC 530 control system, Travel range X/Y/Z 800/800/550 mm, 2-axis NC swivel table, diameter 440 mm, 6-position rotary through-spindle, Kinematic system, Bjdpfxe Ag S Nts Aknslp Heidenhain DNC, Dynamic linear axes, Spindle speed up to 18,000 rpm, HSK-A 63 tool holder, 42-position tool changer, Additional magazine with 87 positions, Torque drive in the C-axis, Spur gear tandem drive in the A-axis, Rebmmgj Agfylon Sech max. table load 450 kg, High-pressure coolant 80 bar, Paper band filter system, Chip conveyor, Bed flushing, Automatic door, Laminated safety glass, Electrical thermal compensation Heidenhain, Electrical handwheel, 3D measuring probe Renishaw, Blum tool breakage / measuring system.

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Bjdogi Dl Nepfx Aknolp Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: excellent (used), Working travels 700 x 420 x 610 mm Table size 1260 x 490 mm Spindle taper HSK E50 Spindle speeds 50-36'000 U/min Tool changer 42 Pos. Control HEIDENHAIN iTNC 530 3D measuring tracer Tool breakage control Tool length and diameter measuring device MARCELS MASCHINEN CH Bsdpfexpud Hex Aknjlp

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Bljdpfszb D Rnjx Aknjp

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Components are in like-new condition. Robot: KUKA KR 20 R1810-2 with: - EtherCAT communication to an external Beckhoff PLC Bsdpfxovwz Huo Aknolp - Diagnostics Safety 3.2 - SafeOperation 3.6 - GripperSpot Tech 5.0

Year of construction: 2012, condition: ready for operation (used), A grinding cell (grinding cabin) SHL with an ABB robot and two grinding units is available. 1) 2x SHL DKS 250/450+DPE-G, year of manufacture: 2012, contact wheel diameter range: 250mm-450mm, spindle speed: 3500rpm, spindle diameter: 35mm, grinding belt length: 3500mm, max. belt width: 100mm, machine dimensions X/Y/Z: approx. 1200mm/900mm/1900mm, weight: approx. 700kg. 2) ABB robot. 3) Grinding unit SHL P550. 4) Pallet conveyor system. 5) Regrip station. 6) Grinding cabin with control cabinet, overall system dimensions X/Y: approx. 5500mm/4900mm. Including controls, license key, fixtures and tools. The system can be collected as seen, dismantling is not required. Documentation available. An on-site inspection is possible. Bjdpsxdm Uasfx Aknjlp

Condition: new, Year of construction: 2023, operating hours: 687 h, functionality: fully functional, machine/vehicle number: 9353740, turning diameter over cross slide: 318 mm, turning length: 470 mm, turning diameter: 260 mm, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, spindle motor power: 15 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,900 mm, total length: 2,900 mm, total width: 1,600 mm, feed length X-axis: 220 mm, feed length Z-axis: 600 mm, quill diameter: 52 mm, overall weight: 3,600 kg, bar passage: 52 mm, Equipment: documentation/manual, For sale: High-precision CNC lathe Accuway Machinery UT200-M, equipped with Live Tools and C axis, ideal for demanding and high-speed machining. Key features: - Model: UT200-M - Manufacturer: Accuway Machinery (Taiwan) - Year of manufacture: 2023 - Control unit: Fanuc Series 0i-TF Plus - Built-in manual guide for easier programming and simulation Machine specifications: - Maximum turning diameter: 260 mm - Maximum turning length: 470 mm - Workpiece diameter over bed: 505 mm - Workpiece diameter over carriage: 318 mm - Number of tool positions in turret: 12 - Spindle speed range: 6000 / 4500 / 4000 / 3500 rpm - Tailstock diameter: 75 mm - Tailstock taper: MT#4 Dimensions and weight: - Length: 2.9 m - Width: 1.6 m - Height: 1.9 m - Weight: 3,600 kg Included accessories: - 8 tool holders (5 for external turning, 3 for internal turning) - Chip conveyor - Chip collection cart - Signal tower (red/yellow/green lights) – real-time machine status - Manual guide – for easy manual programming and path verification The machine was bought new in August 2024, has seen very minimal use compared to its full potential, and is immediately ready for operation. Bodpfxeytpbps Aknelp For any further information regarding condition, price negotiations, technical details or to arrange a viewing, feel free to contact me via message or phone.

Condition: used, Year of construction: 2008, travel distance X-axis: 705 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 610 mm, controller manufacturer: Heidenhain, table width: 460 mm, table length: 1,260 mm, table load: 400 kg, overall weight: 5,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 26,000 rpm, spindle nose: HSK-E50, number of slots in tool magazine: 28, tool diameter: 63 mm, Vertical Machining Center Manufacturer: FEHLMANN Model: PICOMAX 90-HSC Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Technical details: X-axis travel: 705 mm Y-axis travel: 425 mm Z-axis travel: 610 mm Feed rate (X, Y, Z axes): 1 – 20,000 mm/min Feed force (X, Y, Z axes): 12,000 N Table clamping surface: 1,260 x 460 mm T-slots (quantity x width x spacing): 9 x 12-H8 x 50 mm Max. table load: 400 kg Distance floor – coordinate table: 1,026 mm Distance coordinate table – spindle nose: 92 – 702 mm Horizontal throat depth: 480 mm Spindle speed: 50 – 26,000 rpm Drive power – main spindle (100/40% duty cycle): 11.5 / 15.0 kW Max. torque S1/S6: 25.2 / 32.9 Nm Tool holder: HSK-E50 Bedpozq Hkhofx Aknslp Number of tool positions: 28 Max. tool diameter: 63 mm Max. tool dia. with adjacent station free: 100 mm Tool length: 260 mm Tool weight: 3 kg Power rating: 22 kVA Weight: approx. 5,200 kg Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation - FEHLMANN ATS 160 CNC rotary table - incl. machine vices (see image 6) Accessories, pictured tools, and workholding devices are included in the scope of delivery only if stated in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1 h, load capacity: 45 kg, arm reach: 2,050 mm, number of axes: 6, This 6-axis ABB IRB 4600-45/2.05 robot arm was manufactured in 2020. It features a load capacity of 45 kg and a reach of 2.05 m, making it suitable for various automation tasks. The robot is equipped with a Single Cabinet Controller (IRC5) and includes advanced safety features. If you are looking to get high-quality automation capabilities, consider the ABB IRB 4600-45/2.05 robot arm we have for sale. Contact us for further details. Bjdpfxj Agwzke Aknolp - Payload: 45 kg- Reach: 2.05 m- Number of Axes: 6- Protection Rating: Standard- Color: ABB Graphite White std (209-202)- Manipulator Net Weight: 425 kg- Controller Net Weight: 150 kg- Operating Voltage: 3x 400 V AC, 50-60 Hz- Rated Current: 13 A- Short-Circuit Rating: 10 kA- Main Connection: Connector HAN HSB 6p+E (752-2)- Main Switch: Rotary switch (742-1)- Service Socket: 230 V (736-1)- Operating Ambient Temperature: Up to max. 45 °C (708-1)- Manipulator Cable Length: 7 m (210-2)- Teach Pendant: FlexPendant with 10 m connection cable (701-1)- Operating System / Firmware: RobotWare 6 (Boot Application 6.10.02.00) Software Options Installed: * 888-2 ProfiNet I/O Master/Slave Software * 996-1 Safety Module * 997-1 PROFIsafe F-Device * 1125-2 SafeMove Pro * 608-1 World Zones * 611-1 Path Recovery * 616-1 PC Interface * 617-1 FlexPendant Interface * 623-1 Multitasking * 689-1 External Guided Motion * 824-1 MultiFunction * 641-1 RobotWare Dispense- Interfaces & I/O Modules: * 803-2 User interface (parallel, EtherNet, and air) * 431-1 Mating connector for customer signal interface * 239-1 Mating connector kit at robot base * 970-1 RS232 serial interface * 1541-1 Digital I/O base module (16 In / 16 Out) * 731-1 Internal safety signals- Included Base Plates & Mounting Sets: * Base plate Type A (IRB2600/4600) height H=60 mm * Robot mounting kit for IRB4600 * Fastening kit GP Type C + SO Type C+G- Calibration Offset Data (Axis Resolver Values): * Axis 1: 3.9506 * Axis 2: 5.4462 * Axis 3: 5.6400 * Axis 4: 0.5636 * Axis 5: 1.2936 * Axis 6: 2.8601

Condition: used, Year of construction: 1998, Cylindrical Grinding Machine Manufacturer: JUNKER Model: Quickpoint 5002/10 Year of manufacture: 1998 Control system: Fanuc Equipment & Accessories: - Extraction system - Felsomat loading system An accessory package can be purchased separately. Bjdpfx Ajxc Nypoknolp 2 identical machines are available. In our assessment, the machines are in very good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.