Industrial robot

KUKA KR210-2 2000 & NEW MEGMEET WELDING SET

Condition: good (used), Year of construction: 2016, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Hurco Winmax 5 control. Lhjdpfjwu Dlaex Ahvod swarf conveyor

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Lodpfxslhwr Rs Ahvjhd Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Year of construction: 2006, condition: good (used), functionality: fully functional, Screw press Farmet FS1000 for rapeseed, soybean, sunflower. Capacity from 800kg to 1.000kg, depending on motor. It is complete, in good condition. Manufactured in 2006 Lhedpfx Aotxc Itshvsd

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Lhsdpfxstzctme Ahved Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Lhsdpfei D Da Aex Ahvjd Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Lsdpfx Ahjh Dwrxsvohd Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet Addendum to the measurement report!

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Lhedpfx Asfz Dubjhvjd - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2026, An industrial radial drilling machine featuring simple and rigid construction, providing a broad range of machining, such as: drilling, reaming, deepening, boring and tapping. Machine features - Drilling machine intended for drilling, tapping and reaming - Limited vibration due to a dedicated design of the machine – additional ribbing along with strengthened cast iron - Oiled gearbox, containing ground and hardened gears made of high-quality steel alloy - High weight and sturdy construction of the machine provide stability and vibration-free operation - Cube table guarantees easy workpiece fixture - Sturdy, ground column of large diameter - Ground lower plate, intended for machining larger elements - Arm height adjustment through a motor - Control panel located at the front of the drilling machine for improved convenience - Mechanical arm and head clamping - Boom arm height easily adjustable through raising motor - Hydraulically operated feed and spindle drive - Ground column surface allows for simple and accurate arm travel - Ground and hardened boom guide - Drilling machine equipped with manual head and column arm limiter - Large speed range offers precise and quick machining Technical data Maximum drilling diameter - 50 mm Axis distance from spindle to column - 350–1600 mm Axis distance from spindle to table surface - 320–1220 mm Spindle extension - 390 mm Headstock horizontal movement - 1250 mm Boom vertical movement - 590 mm Spindle taper - MK5 Spindle speed (16 gears) - 25–2000 rpm Lhodpfx Aheg Rcd Uovsd Feed range - (16) 0.04–3.2 mm/turn Main motor power - 4.0/5.5 kW Raising motor power - 1.5 kW Machine dimensions - 2500×1070×2840 mm Weight - 3500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPABILITIES Table work surface (length): 2,500 mm Table work surface (width): 820 mm Longitudinal (crosswise) X-axis travel: 2,000 mm Column (crosswise) Y-axis travel: 800 mm Spindle head (vertical movement) Z-axis: 720 mm Minimum distance from spindle nose to top of table: 140 mm Maximum distance from spindle nose to top of table: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ± 110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous rating): 26.0 kW FEED RATES Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between T-slot centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access type Tool shank: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tools: 80 mm Max. tool diameter without adjacent tools: 130 mm Max. tool weight (with holder & taper pin): 8 kgf Max. total tool magazine weight: 150 kgf Max. tool length (from gauge line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Compressed air pressure: 0.5–0.9 MPa Compressed air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of adjusting tools Work area lighting Power transformer for European market USB I/F (1 port) MANUALS, DOCUMENTATION One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE FRAME COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Global safety measures Ljdpfoya Hngjx Ahvehd Work area door interlock with locking switch Full machine enclosure Full-cover chip and coolant protection TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Complete cooling system HIGH PERFORMANCE/HIGH PRESSURE COOLANT Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic ON/OFF + warm-up MEASURING SYSTEMS Automatic tool length measurement & tool breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Preparation for chip conveyor (left side) NC CONTROL UNIT – 15 Functions 19" color LCD (touch screen) 3-D coordinate conversion Position sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background tool path check LAN connection High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak thread tapping / pre-tapping Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale. Travel paths: X-axis: 1270 mm Y-axis: 510 mm Z-axis: 510 mm Lhjdpeyhw Easfx Ahved Control: Max5 Spindle taper: SK-A40 Max. spindle speed: 12,000 rpm Transport weight: 4,550 kg Offered on behalf of a client.