Meat processing machine

Koppens Enrobeuse ER 400

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 10013156, input voltage: 400 V, type of input current: three-phase, power: 4.2 kW (5.71 HP), input current: 11 A, Excellent condition machine, little used, year 2017, fully functional, capacity 150 litres. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Dedpfx Asxlyzijb Tjla

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are selling an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 benchtop model Config: E1-F1-G1 50KN Year of manufacture: 2022 Weight: 151Kg Load transducer: 50KN 2530-50kN/165541 Load transducer: 5kN 2530-5kN/166885 Last service and calibration August 2024 Next service and calibration August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring the patent-pending Instron operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are suitable for performing tensile, compression, bending, peeling, puncture, friction, shear, and numerous other tests and can be used with a wide range of clamping devices and testing fixtures from our extensive accessories catalog. Total height: 1604mm Maximum vertical test space (daylight test - from base to bottom of crosshead): 1198mm Dsdpfx Aowz Iktsb Tjla Test type: Tension, compression, and zero-crossover operation Basic control mode: Displacement control Load capacity - kN (lbf): 50 (11240) Maximum speed - mm/min (in/min): 508 (20) Minimum speed - mm/min (in/min): 0.05 (0.002) Maximum force at maximum speed - kN (lbf): 25 (5620) Maximum speed at maximum force - mm/min (in/min): 254 (10) Return speed - mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of the set speed at a steady rate and without Load Travel (Crosshead Position) Display Accuracy: In no-load condition, ±0.02 mm (0.0008 in) or ±0.10% of the displayed reading, whichever is greater. Travel (Crosshead Position) Repeatability - mm (in): ±0.015 (0.0006) Load measurement accuracy: ±0.5% of the reading up to 1/200 of the force transducer's rated force. Strain measurement accuracy: ±0.5% of the displayed reading up to 2% of the full scale value, with an ASTM E83 Class B or ISO 9513 Class 0.5 strain transducer.

Condition: excellent (used), Year of construction: 1997, grinding diameter 80 - 250 mm grinding length 600 mm centre height 175 mm longitudinal feed 750 mm workpiece turning speeds 6 - 600 U/min grinding spindle speed 1500 - 3600 U/min cross movement - autom. and by hand 320 mm Dedpfx Abeu D I Tlo Tjla Control Kelco 80 total power requirement kW weight of the machine ca. 4,4 t dimensions of the machine ca. 3,1 x 2,1 x 2,0 m

Condition: new, Meat Grinder S32F Unger system 5 tools Dsdpfop R Sdwex Ab Tela Manufacturer: Sind Model: S32F Dimensions: 600x550x1000 mm Electric power: 1.5kW Capacity: 500kg/h

Condition: excellent (used), White Type: WKL 34/60 Djdpfx Abotr Dinj Tjla Weiss air-cooled climate chamber Refrigerant converted to R-452A -60°C to 150°C Room volume: 34 liters Entry port installed in basic equipment: R1 NW 50 mm L1NW 120 mm Internal dimensions: Height 310 mm Width 324 mm Depth 300 mmm External dimensions: Height 1740 mm Width 630 mm Depth 970 mmm Characteristic values for temperature tests: Temperature range -60 to +150 °C Temperature differences in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 1 K ± 1 to ± 2 K Temperature deviation in space (corresponds to temperature gradient) 2 to 4 Temperature change rate (according to IEC 60068-3-5) Heating 2.5 K/min Cooling 3 K/min Heat compensation max. 550 W Characteristic values for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 %r.H. Temperature and humidity differences (in steady state, according to IEC 60068-3-5) Temperature fluctuation over time in the center of the usable space ± 0.3 to ± 0.5 K Temperature deviation in space ± 0.5 to ± 1.5 (corresponds to temperature gradient) 1 to 3 Humidity fluctuation over time in the center of the usable space ± 3 to ± 5 %RH Data for operation: Test room lighting Halogen bulb 12V, 20W Nominal voltage 1/N / PE AC 230 V ± 10 % 50 Hz Rated power 2.5 kW Rated current 11 A On-site fuse 16A slow-blow Heat dissipation air-cooled test chambers Max. Heat dissipation to surroundings 1700 W Refrigerant: R-452A / R23 Weight: 140 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 Dedpfx Ast Hw S Isb Tola total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: used, functionality: fully functional, total length: 2,750 mm, total width: 1,650 mm, total height: 2,630 mm, overall weight: 1,800 kg, The GEA Multi Former MLF 400 is a state-of-the-art machine designed to shape a wide range of food products with precision and efficiency. Thanks to its advanced technology, it guarantees fast, uniform production, ensuring high output while maintaining consistent product quality. In fact, this former is ideal for products such as dumplings, hamburgers and patties, with a flexibility that easily adapts to different types of raw materials. What's more, the GEA Multi Former MLF 400 is designed to maximize production efficiency, while minimizing material waste. Moreover, its intuitive, ergonomic operation makes it easy to get to grips with, reducing downtime. What's more, this machine is built to meet strict hygiene and safety standards, making it easy to maintain and guaranteeing clean, continuous production. In short, the GEA Multi Former MLF 400 is a reliable, high-performance solution for food companies seeking to optimize their manufacturing processes while ensuring consistent, high-quality results. Technical specifications: Type: 400 MLF Hopper capacity: 320 L Maximum forming weight: 1.1 Kg. Maximum output: 65 cp/min. Dodpju E Rgksfx Ab Tola Belt speed from 1.5 to 15 m/min. Output height from 1015 to 1143 mm. Machine weight: 1800 Kg. Power: 23 kW. Air supply 6 bar, 300 L/min. Water supply: 4 bars. Noise level 84.5 db. Dimensions (L x W x H) : 2752 x 1652 x 2636 mm PLC programming.

Condition: like new (used), Forming machine Type VM 400 HD Forming plate width - 400 mm Output conveyor width - 400 mm Dledpfxsumlfio Ab Toa Loading hopper volume - 70 liters Productivity approx. 30 tacts per minute Hydraulic movement of the forming tool Machine dimensions in cm: Width: 80,0 Length: 225,0 Height: 215,0 Installed power: 7,8 kW Voltage: 380 V, 50Hz Weight: 550 kg

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional universal cylindrical grinding machine EMAG Weiss Eco 200. The super compact machine is targeted to users who do not require a CNC control unit, but still set the highest requirements for machining quality. The machine is easy to operate and access, which allows for fast machine tooling. TECHNICAL DATA Workpiece diameter: max. 200 mm Dodpfx Abotmqcwj Tjla Workpiece lenght: max. 400 mm Center height: 100 mm Workpiece weight: 30 kg Workpiece headstock - socket: MK4 Tailstock - socket: MK3 Grinding wheel diameter: max. max. 350 mm Price, delivery time and equipment of the machine according to agreement.

Condition: used, machine/vehicle number: PR30-1005, Proseal PR30 Very simple compact traysealer with a high output with its rotating table system. Have a look at the video for an impression. Djdpsku H Nhjfx Ab Tela