Cylindrical grinding machine

Knuth RSM 500

Condition: ready for operation (used), functionality: fully functional, The frames of the RSM series machines have a heavy-duty design and long, supported guides. The table can rotate and the precisely adjustable hydraulic feed moves smoothly in the longitudinal direction. WORKING AREA Height point 135 mm Workpiece length 640 mm Grinding length 500 mm Grinding diameter 8 mm - 200 mm Inside diameter without support 25 mm - 100 mm Workpiece weight between centers (max.) 50 kg Internal depth 125 mm Table miter cuts (max.) -3° / +9° R / L Fgjdpfxjri Ngyj Alqob Peripheral speed 38 m/s DIMENSIONS AND WEIGHTS Grinding disc dimensions400 mm x 50 mm x 203 mm Grinding wheel internal dimensions (max.)50 mm x 40 mm x 16 mm Grinding disc dimensions (min.)45 mm x 35 mm x 10 mm Dimensions (length x width x height)2.5 m x 1.6 m x 1.5 m Weight 2500 kg

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Fedpfxevca Izs Alqsgb Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, center height: 150 mm, workpiece weight (max.): 130 kg, grinding length: 1,500 mm, grinding wheel diameter: 500 mm, total width: 2,155 mm, total length: 5,465 mm, total height: 1,700 mm, grinding diameter: 300 mm, grinding wheel width: 63 mm, The cylindrical grinding machine was fully overhauled in 2021 and has hardly been used since. The condition of the machine is practically like new. Equipment as shown in the photos. The machine is connected to power and can be inspected at any time by prior arrangement. Technical specifications: Grinding diameter: 300 mm Fgodpfex A Dfyox Alqjb Grinding length: 1500 mm

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-live machine) Fsdpohtrdyefx Alqjgb Technical data: Adjustment travel: 450x300x300mm workpiece clamping table 820x400mm tank size 900x520mm filling height 300mm distance table/electrode holder 150/450mm workpiece weight max. 800Kg Dielectric max. 700l dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz power consumption 6,7 KVA Equipment: Color: new painting light grey + telegrey New control cabinet New control APC910/2 (win10) User interface MF30 V 2.8 New drives B&R with Endat interface Screen touch screen Generator exopuls+ 60A Rev.4 WZW 5-fold Touch protection operable via push button Linear scales in all axes X, Y, Z (Fagor) cartridge filter 2 pieces Cooling unit Termogamma Complete new machine installation New ball screw, bearing, coupling Maintenance unit with digital pressure switch Valve island Co² extinguishing system C-axis Hirschmann 50/min., holding brake Refurbished Manual control bar with enabling button Lowering tank automatic tracking chuck Erowa IST, Hirschmann, 3R Warranty 12 months Transport commissioning on site training

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 255 mm, total width: 1,990 mm, overall weight: 1,800 kg, controller manufacturer: FANUC, controller model: 31i-WB, number of axes: 5, Wire EDM machine manufactured in 2018. This FANUC Robocut alpha-C400iB offers advanced cutting capabilities. If you are looking to get high-quality wire EDM capabilities, consider the FANUC Robocut alpha-C400iB machine we have for sale. Contact us for further details. • Workpiece capacity: max dimensions 730 × 630 × 250 mm; max workpiece weight 500 kg • Axis travel: U/V 120 × 120 mm • Machining capability: max taper angle ±30°/80 mm; minimum drive increment 0.0001 mm; wire diameter Ø0.10–Ø0.30 mm; max wire spool weight 16 kg • Controller: FANUC 31i-WB; part program storage 4 MB • Acoustic noise: LPA 64 dB; LPCpeak 81 dB • Optional specifications: • Thin wire option: wire diameter Ø0.05–Ø0.07 mm • Automatic front door option: max workpiece dimensions with auto door 730 × 585 × 250 mm • 45° die guide option: max taper angle ±45°/40 mm • 30 kg wire feed unit option: max wire spool weight 30 kg Fgedpfx Ajypma Iolqeb • Installation conditions: • Power supply: AC 200V ±10%, 3-phase, 50/60 Hz ±1 Hz; AC 220V ±10%, 3-phase, 60 Hz ±1 Hz; connection cable terminal size 8-5; power consumption 13 kVA • Air supply: 0.5–0.7 MPa; 100–110 L/min (minimum 120 L/min with thin wire option); regulator-side coupler mounting screw Rc1/4 • Environment: 15–30°C (recommended 20 ±1°C for high-precision machining); oil-mist-free and dust-free; humidity ≤75% RH • Grounding: Type C; max grounding resistance 10 Ω; must be grounded independently from other machinery • Shield room requirement: If electrical discharge noise interferes with nearby radio, television, or electronic equipment, a shielded room must be installed

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg Fsdpfot Hw S Iox Alqsgb dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Fgodpfx Aow R Ranolqob Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Fgjdjtqf Rzjpfx Alqeb Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Fsdjxzuyljpfx Alqegb Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block Fodpfx Aslbgfcolqjgb X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories