Cone crusher

KHD Calibrator 1300H

Condition: ready for operation (used), Cone Crusher Svedala Brand: Svedala Iedpfx Aepn I H Teh Neht Type: 36/H/MC Incl.: basic chasis and oil unit

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Iodpsvwlqqefx Ah Neht Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm Ihsdpfeu Nw Ezex Ah Net *

Year of construction: 1986, condition: good (used), machine/vehicle number: 2057, Hosokawa Alpine ZPS 315 classifier mill Isdpfx Ajqi Hhpoh Neht Universally applicable for materials up to a Mohs hardness of approx. 3.5 with requirements for very high final fineness with the lowest possible energy input. Classifier mill for high finenesses, cool grinding and flexible production parameters in the fineness range from less than 5 µm to 200 µm Impact beater mill with Turboplex classifier integrated in the upper section for precise particle size limitation Welded construction, grinding tools made of special steel The mill is available complete with accessories, such as: suction filter, rotary valves, cyclone, filter, fan, piping, control cabinet

Condition: good (used), functionality: fully functional, power: 239 kW (324.95 HP), overall weight: 50,500 kg, Year of construction: 2002, operating hours: 11,245 h, machine/vehicle number: CCC00513, 239 kW weight: 50,5 t engine complete overhauled Ijdpfx Aholhqhmo Nsht tracks as new new cylinder-sealing

Condition: not inspected (used), Hydraulic press for pressing paper etc. materials. The device was operational before disassembly. Press dimensions: length 4850 mm, width 1370 mm, height 3000 mm (possibility of reduction 2300 mm). Weight 3500 - 4000 kg. Ihsdpfjh Nyfysx Ah Njt If you have any questions, please contact us at 539 660 495.

Condition: ready for operation (used), Jaw Crusher Kleemann Brand: Kleemann Type: SSTR 1250 Iedju S Tqvopfx Ah Njht Feed Opening: 1250 x 950 mm Incl.: E-motor Weight appr. 38 Tons

Condition: good (used), functionality: fully functional, Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm feed size hardrock -180 mm feed size limestone -300 mm, Ihjdpfx Ahjlgzrho Not complete with E-drive, conveyor and steel-construction

Year of construction: 1981, operating hours: 24 h, condition: like new (used), machine/vehicle number: 14316, MV/LV three-phase transformer in oil 15kv 400v 50hz 400 Kva year 1981 weight about 1380kg silicon oil kg.300. The transformer is in excellent condition, PCB-free silicone oil Ihedpsiwfg Sjfx Ah Nst

Condition: excellent (used), power: 186 kW (252.89 HP), fuel type: diesel, color: yellow, first registration: 06/2021, Year of construction: 2021, operating hours: 1,040 h, = Additional Features and Equipment = - Reversing camera - Power Take-Off (PTO) = Further Information = Technical Specifications Number of cylinders: 6 Dimensions Dimensions (L x W x H): 625 x 290 x 336 cm Weights Unladen weight: 15,000 kg Payload: 10,000 kg Gross vehicle weight: 25,000 kg Functional Bucket capacity: 6 m³ CE marking: yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request BERGMANN C912S TRACKED DUMPER WITH HYDRAULIC THREE-WAY TIPPER Year of manufacture: 2021 1,040 operating hours Water-cooled 6-cylinder Cummins diesel engine QSB 6.7 Engine output: 180 kW Max. torque: 400 Nm at 2,200 rpm Emission standard: Stage V Drive Hydrostatic travel drive with two-speed planetary gearbox Travel range I: 0–8 km/h Travel range II: 0–15 km/h Weight Unladen weight: 14,850 kg Payload: 10,000 kg Skip Skip volume, struck: 4.7 m³ Skip volume, heaped: 6.5 m³ Three-way tipper Ihjdpouxypuefx Ah Not Cab Comfort driver’s cab with air-suspended seat Steering wheel or joystick steering Dimensions 6,246 mm x 2,900 mm x 3,360 mm Undercarriage 2 rubber tracks, width: 750 mm CE Declaration of Conformity FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO WATCH OUR VIDEO PRESENTATIONS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINERY AVAILABLE FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL