Stacking device Ka-Ma, KR-1300-1, vacuum, max plates

Kama KR 1300-1

Condition: new, table length 1220 mm table width 760 mm Gbodpfxoxqrhlj Ad Isp table height 910 mm weight 226 kg

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Gbjdpfsu Ic Avox Ad Isp Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Year of construction: 2013, condition: used, Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 motorized translating roller conveyor Gbedpfx Aer Am Sqsd Isp * 1 motorized roller conveyor for panel stack unloading Technical features: * Type: KR210-2 * Number of axles: 6 * Admissible nominal load: 210 Kg * Machine weight: 1267 kg * Sound level: 75dB * Installed power: 25.8 KW * Panel dimensions - Min\max length: 300\3000 mm * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: 90 kg

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW Gbsdpoiqp Erjfx Ad Iop weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light

Condition: new, Type DTW-60A Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Gbjdsd Tqt Nepfx Ad Iop Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 1 mm, shaft diameter: 50 mm, input voltage: 400 V, coil weight: 3,000 kg, FOR SALE – Roll Forming Line for Drywall Profiles UW / CW (EU + IT) For sale: cold roll-forming line for metal drywall profiles, complete and high-productivity, designed for the production of UW, CW_EU and CW_IT profiles. Gsdpeyi Hl Rjfx Ad Iebp Main features: * Roll forming line with 18 forming stations * Double hydraulic decoiler (3 tons per head) * Introduction and lubrication unit * Integrated rotary punching unit * Multi-axis adjustable straightener * Double wagon cutting and punching unit * Dedicated cutting and punching dies for UW, CW_EU and CW_IT * Bosch Rexroth hydraulic power unit * CMZ control * CE certified * Complete safety guarding system Performance: * Working thickness: 0.50 – 1.00 mm * Material: DX51D + Z100 * Production speed: up to 130 m/min * Dimensional tolerance: ±0.5 mm/m * Total line length: approx. 15 m Included equipment: * Full set of cutting and punching dies * PLC software backup * Complete technical documentation * Construction and as-built drawings * CE Declaration of Conformity Machine condition: Complete industrial machine, high-end specification, manufactured by an international specialized roll-forming machinery producer. Ideal for manufacturers of drywall systems. Machinery is used but constantly updated and improved in every part. Pictures show both factory collection (so when new) + some of the updates which have been done. 📍 Available for inspection by appointment

Condition: good (used), Year of construction: 2015, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: TEK05/2015, type of input current: three-phase, sheet thickness steel (max.): 1 mm, sheet thickness (max.): 1 mm, total width: 840 mm, total length: 15,000 mm, total height: 153 mm, feed length X-axis: 46,000 mm, feed length Y-axis: 2,000 mm, input voltage: 380 V, working width: 2,000 mm, infeed width: 1,500 mm, control cabinet length: 1,500 mm, control cabinet height: 1,000 mm, control cabinet width: 800 mm, feed rate X-axis: 700 m/min, workpiece weight (max.): 163 kg, product height (max.): 1 mm, input current: 380 A, power: 150 kW (203.94 HP), coil weight: 10,000 kg, HIGH GROOVE SHEET PROFILING LINE (Corrugated Metal Sheet ribs 53/85/135/153 mm) Profile Type: H53 mm / H83 mm / H135 mm / H153 mm Sheet Metal Profile Thickness: 0.75 mm - 1.25 mm Minimum - Maximum Profile Length: 1500 mm - 15000 mm Manufacturer: TEK MAK Year of Construction: 2015 Condition: Very good condition for rolls for profiling 53, 85, 135, and good condition for rolls for profiling the 153 mm rib. Components of the Line: Hydraulic Uncoiler, 10-ton capacity Profile Forming Machine Mobile Guillotine Gbjdpfx Aeuannxsd Ijp Stacking Table Control and Command Panels

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 Godsynbmmjpfx Ad Iebp • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile Gsdpjv Awguofx Ad Iobp - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: new, Type DTL-20A Brush roll height 200 mm Brush roll diameter 300 mm Roller speed: frequency control Electric up and down Power 0.75 kW Gbjdpfjd Tqtyex Ad Iop Transport dimensions 860x750x1100 mm Weight 140 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m