Milling chucks, 14 pieces

KAISER SK50 395.162

Condition: used, diameter div. number 56x tool adaptor BT 40 Hedpfx Ajwtrzyjdash

Condition: good (used), Centre distance: 6500 mm Centre height: 665 mm Hjdpfxjw R Avbj Adaeh Swing diameter over bed: 1270 mm Turning diameter over cross slide: 1000 mm Spindle speed: 3.55-710 rpm Faceplate diameter: 1200 mm X-axis travel: 600 mm Main spindle bore: 128 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 350 mm Tailstock quill taper: DIN 55028 Main spindle nose: DIN 55027 Accessories: 3 steadies, documentation

Condition: used, functionality: fully functional, Year of construction: 2013, Sahinler HPK 200 Hydaulic section and pipe bending machine Mil and Shaft Diameter: 200mm Tool and Roll Diameter: 900mm Working Speed: 2-5 m/min Motor Power: 30 kW Bending capacity x15x4 273x5.6 / 10000 mm Diameter biggest roll 9"x6,3 / 4000 mm Diameter top roll 650 mm Diameter upper roll 650 mm Roll capacity section - 3 200x200x18 / 5000 Shaft diameter 200 mm Hjdpsw D Uqxjfx Adaoh Top roll x15 with prebending min.120x120 / 3000 mm Voltage 3x400 V Working speed 2-5 m/min Power Power max. 30000 W Height 2300 mm Length 2400 mm Width 3400 mm Weight15000 kg

Condition: used, Year of construction: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Operating hours: 5,400 Liebherr engine – Tier 4 – EPA Adjustable boom 4.00 m Stick 2.70 m Counterweight 4.8 t SLC undercarriage, track width 2,250 mm B60 tracks, 750 mm triple grouser pads, 50 links Automatic air conditioning Central lubrication system (automatic) Premium driver's seat Comfort radio Raised hand supports for joysticks Footrest Sun visor Impact-resistant roof window Roof window wiper Cab work lights, front, LED 2,100 lumens, 2 units Cab work lights, rear, LED 2,100 lumens, 2 units Bypass filter, Liebherr Fuel tank filling pump Reversing camera Camera for monitoring right side view Return line filter for hydraulic breaker Additional handrail for accessing the right upper side of the uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium-pressure circuit (left) / high-pressure circuit (right) Control switch for operating high-pressure circuit via proportional control or joystick (switchable) High-pressure circuit switchable via pedal or mini-joystick High-pressure circuit with tool control Overload warning system Two-piece boom 4.00 m Stick 2.70 m Load-holding valve for lifting cylinder Load-holding valves for boom cylinders Load-holding valves for stick cylinder Adjustable rod guard for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Hedjw Rcrvopfx Adash Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Central lubrication system extended for connecting link Stick protection Hydraulic quick coupler SWA 48 HD with Likufix

Condition: new, Year of construction: 2024, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded Hsdpfxefu Ivze Adash

Condition: used, mileage: 205,880 km, power: 265 kW (360.30 HP), first registration: 05/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 8x4, fuel: diesel, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2008, Leaf spring suspension Hedpfx Adok Sfv Noajh Manual gearbox CIFA 9m3 8x4 Technically in good condition

Condition: used, Year of construction: 2007, pressure 100 t Hsdsvprv Repfx Adaeh stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company.

Condition: new, functionality: fully functional, machine/vehicle number: HR15149, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 34,700 mm, fuel type: diesel, mast type: telescopic, construction height: 3,260 mm, power: 155 kW (210.74 HP), fork carriage width: 2,000 mm, fork length: 1,200 mm, empty load weight: 24,000 kg, total length: 8,860 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telehandler Chassis number: HR15149 Fork width: 150 mm Hsdpewruqzefx Adaeh Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Transmission: Hydrostatic Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: MITAS EM60 17.5 R25 22PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: MITAS EM60 17.5 R25 22PR Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours Side shift, Rear work lights, Front work lights, Heating, Road-legal (STVZO), Full cabin, Air conditioning, Interior mirror, Exterior mirror, Joystick, LED, Seat, Chocks, Machine movable by radio control, Preparation for work basket with winch TÜV preparation 20 km/h Mechanically adjustable fabric seat with headrest (GRAMMER) EcoStop 2 cameras (telescopic head right side) with display in the cabin

Year of construction: 2019, condition: ready for operation (used), A Klaaßen CNC heavy machining center is available. Turning diameter: 1500mm, center distance: 4500mm, chuck diameter: 1000mm, through-hole: 190mm, travel Y: 340mm. Machine dimensions X/Y/Z: approx. 7800mm/2900mm/2200mm, total machine weight: approx. 40000kg, control: Siemens Sinumerik 840D sl with ShopTurn, operating hours: 3092h. Including extensive accessories. Documentation available. On-site inspection is possible. Hjdpfxswkuzde Adaeh

Condition: used, mileage: 168,000 km, power: 331 kW (450.03 HP), first registration: 05/2016, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: soot filter, - Retarder - Air conditioning - Stetter 9m3 - Automatic suspension: Leaf spring suspension Hjdpfx Adoxq Sxweaoh