High-pressure cleaner

Kärcher HDS 8/18-4 CXA

Condition: new, functionality: fully functional, operating pressure: 180 bar, empty load weight: 135 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 155 °C, KARCHER HDS 8/18-4 CXA PRESSURE WASHER TECHNICAL DATA: Model: HDS 8/18-4 CXA Manufacturer: KARCHER Country of manufacture: Germany Series: Professional Condition: NEW (washer in factory packaging) Type: Hot water Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 300-800 Working pressure (bar): 30-180 Maximum pressure (bar): 220 Fuel consumption (kg/h): 5.2 Water heating range (°C): min 80 - max 155 Fuel consumption in eco mode! (kg/h): 4.2 Connected power (kW): 6 Power cable (m): 5 Hose length (m): 15 Fuel tank (l): 15 Weight with packaging (kg): 135 Csdpey Sm Dgjfx Airegu Dimensions (L x W x H) (mm): 1250 x 650 x 920 KARCHER HDS 8/18-4 CXA EQUIPMENT: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional 15M, DN6, 250BAR, 155°C - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Power nozzle with 25° flat stream. Flat high-pressure jet with high surface coverage and good dirt removal. Pressure regulator: ServoPress pressure regulator Automatic drum: Integrated, original automatic drum WHY CHOOSE THE HDS 8/18-4 CXA? With its ability to heat water to 155°C (steam cleaning above 100°C), the HDS 8/18-4 CXA, combined with a cleaning agent, effectively removes even the most stubborn dirt. The device also uses minimal water and fuel for heating thanks to the eco!efficiency mode, ensuring economical operation. Thanks to its compact dimensions and low weight, the device can be easily transported in a station wagon. Accessory holders on the rear of the housing allow for convenient storage of the lance and power cable. The large water filter installed at the water inlet is easy to remove and clean, further protecting the pump from water contamination. Large wheels and a compact, vertical design make it easy to transport the device over uneven terrain and overcome obstacles such as curbs. AUTOMATIC HOSES REEL: The HDS 8/18-4 CXA model is equipped with a unique, automatic hose reel, which significantly improves workflow. The automatic rewind system helps keep things organized, saves time, and protects the hose from mechanical damage when reeled. The reel itself is made of the highest quality materials, ensuring trouble-free operation. KARCHER HDS 8/18-4 CXA RELIABLE | DURABLE | ERGONOMIC The HDS line emphasizes ergonomics and work comfort. Due to its compact size, the device can operate in hard-to-reach places or where work often requires multiple locations. The device is equipped with a unique, automatic pressure hose reel. Additional handles allow for transporting the device with additional accessories. A brass pump head and automatic pressure reduction system extend the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes an EASY!Force high-pressure gun with a rotating lance, a 15m high-pressure hose with an automatic reel, a pressure regulator, and a power nozzle. EASY!Force technology reduces the force required to hold the gun trigger to zero. The device also features the EASY!Lock accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is brand new and factory-sealed.

Condition: ready for operation (used), For sale: Fully operational Fastrac 7,950 operating hours Year of manufacture: 2000 Cgjdpfxjywnqfj Airou Vehicle inspection needs to be renewed Private sale

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets Codpfxofv H Ede Airsgu

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850 Cgodel Si Uujpfx Airju

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table Cgjdpfxotwb U As Airou - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Year of construction: 1987, condition: used, machine/vehicle number: 001472U, For Sale Codpettax Sjfx Airjgu 1x Used single-girder overhead crane 13.685mm x 2x 2.000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 5,500 kg, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. Csdpfxsrh Iw To Airsgu The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Condition: like new (used), Year of construction: 2010, FICEP ZAAG 1045 BH Cgodpfowd Ugtsx Aireu Main technical specifications - Minimum sawing capacity at 90°: 80 x 10 mm - Maximum sawing capacity at 90°: 1015 x 450 mm - Sawing capacity at 45°: 620 x 450 mm - Sawing capacity at 60° (only available on two flanges with relevant option): 350 x 350 mm - Mitre angles: +45° / -60° - Bandsaw blade dimension: 41 x 1.3 mm - Bandsaw blade speed: 20 - 100 m/min - Band motor power: 5.5 kW - Working table height: 850 mm

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Cedeh Uhb Sepfx Airogu Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: good (used), Year of construction: 2012, Amada LC 2012 C1 NT / Punch - Laser Machine, Year of manufacture: 2012, Control: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Cjdpsyay Tpefx Airegu Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Turret stations: 46 positions,